To Find Fix:
1. Go to Koha Administration
2. Search PatronSelfRegistrationVerifyByEmail
3. Verify that NOTE now says "system preference requires the
cleanup_database ..."
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Mikael Olangcay Brisebois <mikael.olangcay-brisebois@inlibro.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
The default for Zebra is to not return results where the record size is
greater than 1045 KB ( 1 MB ). Some libraries need to increase this
ceiling, but it may come at a cost with z39.50 compatibility with other
services. For that reason, we should make this setting configurable on a
per-instance basis.
Test plan for kohadevbox:
1) Apply this patch
2) Run:
$ reset_all
3) Restart Zebra:
$ sudo koha-zebra --restart kohadev
4) Check how zebrasrv was called:
$ ps waux | grep zebrasrv
=> SUCCESS: Looks like
... /usr/bin/zebrasrv -v none,fatal,warn -k 1024
5) Edit /etc/koha/sites/kohadev/koha-conf.xml, add:
<zebra_max_record_size>2048</zebra_max_record_size>
6) Repeat (3) and (4)
=> SUCCESS: Looks like
... /usr/bin/zebrasrv -v none,fatal,warn -k 2048
7) Sign off :-D
General test plan:
1) Apply this patch
2) Build a Debian package
3) Specify a zebra_max_record_size of 2048 in your koha_conf.xml
4) Restart zebra
5) Index a record greater than 1 MB but smaller than 2 MB
6) Note that it is searchable!
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Hugo Agud <hagud@orex.es>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
When Koha charges for holds, a message with the fee is
shown before the patron places the hold. The amount needs
to be formatted according to CurrencyFormat system preference.
To test:
- Add a hold fee to your patron category
- Log into the OPAC
- Search for a record to place a hold on
- Click Place hold
- Verify there is a note showing about the hold fee
- Toggle CurrencyFormat and HoldFeeMode and verify
that the formatting is always correct
Signed-off-by: Jack Kelliher <jke0429@stacmail.net>
Signed-off-by: Mikael Olangcay Brisebois <mikael.olangcay-brisebois@inlibro.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Test plan:
1. Notice that /patron_attributes.sql and /patron_attributes.txt can be
located in 2-Valgfritt
2. Confirm that the SHOW_BCODE patron attribute in the English web
installers .sql and .txt file is also in the Norwegian web installers
.sql and .txt file
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
A seperate bug (Bug 16853) removed the subroutine used in this file. I removed the code as it had become unnecessary.
Test plan:
1. Confirm that &changepassword can't be found in C4/Members.pm
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Test plan:
1) Go to admin, then to MARC frameworks, then to default
frameworks structure, then subfield stucture for 952
2) Verify that 'q'
is described as 'checked out'
3) Go to <intranet>/cgi-bin/koha/cataloguing/additem.pl?biblionumber=x
4) Verify
that 'q' is also descirbed as 'Checked out' in
5) Apply patch and update
your database
6) Verify that the description of 'q' has changed to 'Date
due'
7) Go to <intranet>/cgi-bin/koha/cataloguing/additem.pl?biblionumber=x
6) Verify that it has changed to 'Date due'
Signed-off-by: Pierre-Marc Thibault <pierre-marc.thibault@inLibro.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Bug 20491: (QA follow-up) Remove atomic update
We should not update existing installations, especially
since this would not work for translated frameworks.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
To test:
1) Look at value of CataloguingLog prefernce
2) Apply the patch and the value should change
3) Verify that the warning has been removed
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Also fully qualifies some subroutine calls that fail for reasons unkown.
Signed-off-by: Bob Bennhoff <bbennhoff@clicweb.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch fixes an issue where patron is not allowed to place a hold in OPAC
while their home library is not a pickup library.
Instead, they should be presented with a list of other available pickup locations.
Signed-off-by: Bob Bennhoff <bbennhoff@clicweb.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Bob Bennhoff <bbennhoff@clicweb.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch enables the checks for transfer limits for given biblionumber in
OPAC when patron proceeds to place a hold. In case none of the items of that
biblio can be transferred to a library, that library will not be included in
the list of pickup locations.
To test:
1. Make sure you meet the following requirements:
1.1: You are able to make holds in OPAC
1.2: System preference UseBranchTransferLimits set to "Enforce"
1.3: System preference BranchTransferLimitsType set to "item type"
(for the sake of simplicity of this test plan, but you may also
set it to "collection code" and deal with ccodes instead)
1.4: System preference item-level_itypes set to "specific item"
1.5: You have the default libraries and item types, otherwise replace
the branchcodes and itemtypes in this test plan with your own
2. Make sure 'Fairfield' in cgi-bin/koha/admin/branches.pl has not disabled
its ability to act as a "Pickup location"
3. Have a biblio with exactly one item of item-level itemtype 'BK'
4. Set item holdingbranch as 'CPL'
5. Go to cgi-bin/koha/admin/branch_transfer_limits.pl (keep this page open in
a second tab for faster testing)
6. Select library 'Centerville'
7. Uncheck the checkbox 'FFL - Fairfield' and click Save
8. Go to OPAC and find your biblio, and start placing a hold on it
9. Click at the list of "Pick up location"s.
10. Observe that it is missing 'Fairfield'
11. Go back to cgi-bin/koha/admin/branch_transfer_limits.pl
12. Repeat step 6 and this time, check the checkbox 'FFL - Fairfield'
13. Refresh the page you arrived at step 8
14. Observe that it now includes 'Fairfield'
Signed-off-by: Bob Bennhoff <bbennhoff@clicweb.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Consider transfer limits in Koha::Template::Plugin::Branches->pickup_locations.
This patch modified the mentioned method to consider branch transfer limits and
does not include any library in the returned list of libraries in case a branch
transfer limit applies for a given book or item.
To be tested in following patches.
Signed-off-by: Bob Bennhoff <bbennhoff@clicweb.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch adds $branchcode_to parameter to CanBookBeReserved and
CanItemBeReserved. It represents the pickup location for the hold. This patch
checks if the library is configured to be a pickup location (see Bug 7534), and
also if the item can be transferred into the given library (see Bug 18072).
To test:
1. prove t/db_dependent/Holds.t
Signed-off-by: Bob Bennhoff <bbennhoff@clicweb.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch adds a new method, Koha::Libraries->pickup_locations. This method
takes either an item or a biblio as a parameter, and returns the list of
acceptable pickup locations by considering libraries' configuration to act
as a pickup location as well as any branch transfer limits that may apply.
To test:
1. prove t/db_dependent/Koha/Libraries.t
Signed-off-by: Bob Bennhoff <bbennhoff@clicweb.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This adds the "No, let me think about it" option.
It is the default option. If the Mana system preference
is set to "No, let me think about it", the user is warned
on the admin home page that he has not decided yet to use
or not Mana knowlegde base.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Includes:
* code factorization
Some code from subscription & Mana-KB has been factorized in order to speed-up next developments
* SytemPreferences:
Mana Activation:
- add a value "no, let me think about it", that is the default value.
- as long as this value is selected, messages ask if user want to activate it ( in Administration and Add-subscription(page 2) )
AutoShareWithMana
- Add the syspref AutoShareWithMana: user can automatically share infos with Mana-KB (not set by default)
* Interface :
- On mana-search, rows are now sorted by date of last import, then by number of users
- Windows redesigned to improve the user experience
* New Feature : report a mistake.
- people can now report an invalid data (wrong, obsolete,...)
- if a data is reported as invalid many time, it will appear differently
- Added few tooltip (to explain the fields last import, nb of users, to explain the new feature)
- When reporting a data as invalid, a comment can also be added. Koha will then display comments related to data in result lists
* API (svc/mana)
- add svc/mana/addvaluetofield: allows to ask mana incrementing a field of a resource
- no hardcoding for resources in the code of api (api needs to be called with a ressourcename)
* New feature : SQL report sharing
- Create Koha::Report.pm and Koha::Reports.pm, objects class for Reports
- New feature: share reports with Mana-KB
- New feature: search report in Mana-KB with keywords
- New feature: load reports from Mana-KB
Test plan:
1 - Apply Patch + update database
2 - Copy the three lines about mana config in etc/koha-conf.xml in ../etc/koha-conf.xml (after <backupdir> for example)
<!-- URL of the mana KB server -->
<!-- alternative value http://mana-test.koha-community.org to query the test server -->
<mana_config>https://mana-kb.koha-community.org</mana_config>
3 - Check Mana syspref and AutoShareWithMana syspref are not activated
4 - Search the syspref ManaToken and follow the instructions
5 - subscriptions
- Try create a new subscription for a first serial => Mana-KB shouldn't show you anything (except if the base hase been filled)
- Share this serial with Mana-KB (on the serial individual's page there must be a Share button)
- Try to create a new subscription for serial nr1 => a message should appear when you click on "next", click on "use", the fields should automaticaly appear
- Activate AutoShareWithMana => Subscriptions
- Create a new subscription for a second serial
- There shouldn't be any Share button
- Create a second subscription => the message should appear, click again on use
6 - SQL Report
- Create a new SQL report, without notes.
- On the table with all report (reports > use saved), there should be the action "Share"
- If you click on share, you have an error message
- Create a new report, with a title and notes longer than 20 characters
- You can share it with mana => you will have a success message
- On (report > use saved), there must be a message inviting you to search on Mana-KB for more results, enter a few word from title, notes, type of the report you shared, it should appear. You can use it, it will load it into your report list.
7 - Report mistakes.
- On any table containing Mana-KB search results, you can report a mistake and add a comment.
8 - For each previous test, try to send wrong data, to delete the security token, to send nothing: it should show a correct warning message.
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Rebased-by: Alex Arnaud <alex.arnaud@biblibre.com> (2018-07-04)
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
- add a class SharedContent.pm to communicate with Mana-KB server
- add a link in serials-menu.inc to serials_search.pl to open
a mana-subscription research form
- modify the research form in serials-search.tt to show the right fields
for Mana-KB
- create datatable in mana-subscription-search-result.inc to show
results from a research on Mana-KB
- modify serials-search.pl to manage research on Mana-KB
- add a mana_id to subscription table
- add a share button on serials-toolbar.inc and a modal to ask
the language of the share and to alert if the subscription is
already link to a Mana-KB subscription model
- add function in C4/Serials to get all the info for a subscription
sharing
- modify subscription-detail.pl to manage sharing to Mana-KB
- modify subscription-add.tt and subscription.pl to manage a
import from Mana-KB during a subscription creation
- add 2 script in svc for ajax calling from subscription-add.tt
to communicate with Mana-KB server during a asubscription creation
- add a function in Subscription.pm to have all the info for a Mana-KB research
from a biblionumber
- modify functions used by subscription-add.pl in C4/Serials to manage a
frequency which came from Mana-KB server and not already created on the
koha database, and modify the tests of the said functions
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Rebased-by: Alex Arnaud <alex.arnaud@biblibre.com> (2018-07-04)
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Add the system preference to enable or disable Mana-KB webservice on koha.
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Rebased-by: Alex Arnaud <alex.arnaud@biblibre.com> (2018-07-04)
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
1) Go to reports then catalog by item types
2) Pick a location and look at table
3) Change the system prefernce of item-level_itypes
4) Verify a zero result
5) Apply patch and retry
6) Verify that result does not change to zero on either preference
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Test Plan:
1. From home page, go to "Acquisitions"
2. Add a test vendor under "New vendor"
3. Give the vendor any name and click "Save"
4. Click "New Basket"
5. Give the basket a name and click "Save"
6. Click on "Add to basket"
7. Click on "From an external source"
8. Note the order of inputs (ISBN, ISSN, Title...)
9. Go back to the homepage
10. Go to "Cataloging"
11. Click on "New from Z39.50/SRU" button. A new window should open
12. The order of inputs under 'Z39.50/SRU Search' should all match the
order of inputs from step 8. (Except "Select MARC framework)
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch adds [% USE Koha %] to header.inc so that Koha.Preference
calls will work correctly.
To test, apply the patch and log in to the staff client as a user who
has permission to access the ILL module.
- Go to the catalog's advanced search page
- Cnfirm there is a header menu item under "More" for
"ILL requests."
Signed-off-by: Maryse Simard <maryse.simard@inlibro.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This trivial patch just marks the mentioned column as a boolean.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
https://bugs.koha-community.org/show_bug.cgi?id=16497
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
There was a mix up between "modification" and "edit" for $action in
opac-memberentry.pl.
If a patron is logged into the OPAC and they attempt to submit changes to their
personal details without having actually changed anything, the page reloads with
a message stating 'No changes were made.' However, the fields that now appear
are those that have been allowed/hidden according to the preferences set for
patron self registration, even if patron self registration is disabled. This can
lead to problems if there are discrepancies between the fields allowed for self
register settings and those allowed for patron self modification settings.
To replicate:
1.) In Administration › System preferences > OPAC, set PatronSelfRegistration to
'don't allow'
2.) Modify the unwanted fields for PatronSelfModificationBorrowerUnwantedField
and PatronSelfRegistrationBorrowerUnwantedField so that at least one field is
different between the two settings and save (for example, specify 'mobile' to be
hidden in the former, but don't include in the list of fields to be hidden in
the latter).
3.) Log into the OPAC and navigate to the 'your personal details' tab. Notice
that the editable fields correspond to those not hidden by
PatronSelfModificationBorrowerUnwantedField
4.) Without making any changes, click on 'Submit update request'.
5.) Note that on this page the fields correspond to those not hidden by
PatronSelfRegistrationBorrowerUnwantedField and are now editable (including any
fields that would otherwise be hidden by the Self Modification settings).
Reported-By: Chris Slone <cslone@camdencountylibrary.org>
Signed-off-by: Devinim <kohadevinim@devinim.com.tr>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Easily removed switching the two conditions.
Test plan:
Hit catalogue/MARCdetail.pl?biblionumber=1
=> Without this patch you will see in the log warnings like
Argument "ddc" isn't numeric in numeric eq (==) at /home/vagrant/kohaclone/catalogue/MARCdetail.pl line 277.
=> With this patch applied the warnings do no longer appear
Signed-off-by: Pierre-Marc Thibault <pierre-marc.thibault@inLibro.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
If there is no item linked to an account line, the ->item method should return undef.
Without this patch it explodes with:
Carp::croak('DBIC result _type isn\'t of the _type Item') called at /home/vagrant/kohaclone/Koha/Object.pm line 102
Exists since the introduction of this method by bug 12001
Reported on bug 19489 comment 18.
Test plan:
prove t/db_dependent/Koha/Account/Lines.t
must return green
Signed-off-by: Pierre-Marc Thibault <pierre-marc.thibault@inLibro.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Pierre-Marc Thibault <pierre-marc.thibault@inLibro.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
In Reports > Patrons statistics, the combination of activity and extended attributes generates an invalid SQL query with error :
ERROR 1052 (23000): Column 'borrowernumber' in IN/ALL/ANY subquery is ambiguous
This is because FROM contains tables borrowers and borrower_attributes both containing borrowernumber column.
Test plan :
1) Be sure to have a patron extended attribute
2) Be sure you have some recent circulation activity
3) Go to Reports > Patrons statistics
4) Select 'active' in 'Patron activity' and 1 years of activity
5) Check 'Row' in 'Patron category'
6) Check 'Columns' in a extended attribute
7) Submit
8) Without patch you have no results, with patch you have exepected results
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Caused by
commit 0cffb0f758
Bug 21621: Remove incorrect GROUP BY from tools/letter.pl
The test plan was not complete enough.
Test plan:
1) Go to Home › Tools › Notices & slips
2) Choose a letter to edit, e.g. PREDUE. Note that there is only a
single row.
3) Click the edit button on the notice.
4) Expand the 'Print' section. Put text into the Message subject and
Message body text areas.
5) Click save, this will take you back to the 'Notices & slips' page.
6) Clone PREDUE for a specific library
7) The 'all libraries' option must list the templates for all libraries,
but without duplicate
8) Select a library in the dropdown list: only the templates for the
given library is listed, without duplicate
Signed-off-by: Barton Chittenden <barton@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
- Makes token splitting work like in biblio search
- Only adds right hand truncation since that's what Zebra also does
- Only adds truncation if the token is not a phrase and ends in a word character
- Adds tests to existing and new QueryBuilder functions
Test plan:
1. Create an authority record for "Duck, Donald"
2. Try contains type authority searches with the following terms and make sure they find the record:
Duck, Donald
donald duck
don duck
"Duck, Donald"
3. Make sure the following search works but does not find anything:
"Duck, Don"
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
I compared the template logic to the MARC detail page in staff.
We use $raw there instead of html, which will also make notes and other
fields with HTML in them display correctly. I am proposing to use the
$raw filter in OPAC as well.
To test:
- Go to the OPAC
- Search for a record with items
- Switch to the MARC view
- Verify empty cells show (html entity for space)
- Apply patch
- Repeat test
- Verify empty table cells now show as empty
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
To test:
1 - Delete all refund_lost_item_fee_rules form the db
delete from refund_lost_item_fee_rules;
2 - View the Standard circ rules - Default lost item fee refund shows as
'No'
3 - View circ rules for a single library, shows as 'Default (Yes)'
4 - Return a lost item, it actually does refund (this is in the
LostItemFeeRules code, default 1 if not set)
5 - Apply patch
6 - Rule shows as 'Yes'
7 - View a specifc rule, still says Default (Yes)
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Bug 14716 added a call to encode-uri() and namespace str. This
namespace declaration is sometimes missing in UNIMARC default XSLT
files.
This patch adds namespace declaration also where encode-uri is not used
because it may be used in the future. And those files are the base for
home made custom files.
Test plan :
1) Use a UNIMARC DB
2) Use default in all XSLT sysprefs
3) Apply patch
4) Perform a search on OPAC
5) Check display is OK
6) Click on a record for detail page
7) Check display is OK
8) Perform a search on staff interface
9) Check display is OK
10) Click on a record for detail page
11) Check display is OK
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
1. Navigate to tools, then batch item modification.
2. Input a valid barcode into the barcode list input field, and press
continue.
3. Under the Edit items heading, text should display "Checking the box
right next the subfield ..."
4. Apply patch and refresh page, text should now display "Checking the
box right next to the subfield ..."
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Changed 'Don't Display' to 'Don't display' for the
EasyAnalyticalRecords options.
To find fix:
1.Be loged in as a user who can access sys prefrences.
2.Go to:
Koha Administration > Global System Preferences > Cataloging >
Interface.
3.Confirm that the dropdown option for EasyAnalyticalRecords is now
'Don't display'
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Code was previously written with '^I' where an indent was supposed to
be. I deleted all '^I's and replaced them with indents.
To find this change:
Look at the tags/review.pl file and confirm indentation is correct
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
I removed space before : on order receive filters
To find this change:
1. Create a vendor
2. Create a basket and add an order to basket
3. Close basket and select 'receive shipment'
4. Check that filter options found on the left side of the page finish with a colon and that there is no space before the colon
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Changed "Street Address" to "Street address" in the patron search search
fields under the plus sign to fit Koha's capitalization rules.
To find this change:
1. Go to Patrons and switch in the search to search patrons
2. Click on the plus sign
3. Check "Search fields" pull down
4. "Street Address" should now be "Street address"
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
To test:
1) Enable OnSiteCheckouts system preference
2) Checkout an item checking the onsite checkout checkbos in more
options
3) Go to circulation > pending on-site checkouts
4) Verify the checkout shows
5) Go to circulation > renew
6) Try to renew the on-site checkout using the barcode
7) Verify display:
onsite_checkout Continue without renewing
8) apply the patch and reload page with error message
9) verify display:
Item cannot be renewed because it's an onsite checkout
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
I have updated the broken link everywhere it occurs.
Confirm that the new link works in the installer.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Olivia Lu
Kyle M Hall
Katrin Fischer
Jasmine Amohia
helene hickey
Kyle M Hall
Kyle M Hall
Lari Taskula
Olli-Antti Kivilahti
Nick Clemens
Alex Arnaud
Baptiste Wojtkowski
morgane alonso
Ethan Amohia
Owen Leonard
Tomas Cohen Arazi
Jonathan Druart
Fridolin Somers
Ere Maijala
Jack Kelliher
Mackey Johnstone