This patch checks for waiting or in_transit items allocated to recalls, and excludes them from the Holds to Pull report.
To test:
1. Enable UseRecalls and set the recalls-related circulation rules
2. Check out an item to Patron A
3. Place an item-level hold on the item for Patron B
4. Log into the OPAC as Patron C and search for the item. Place an item-level recall on the item.
5. Go back to the staff interface and check in the item. This should prompt a pop-up to confirm the recall as waiting. Confirm the recall as waiting.
6. Go to Circulation -> Holds to pull.
7. Notice that even though the item is allocated for a recall, the hold is showing. It should not be showing in this page.
8. Apply the patch, restart services and refresh the page
9. The item allocated to a recall should no longer be showing in the Holds to pull report
10. Go to the record detail page and go to the Recalls tab
11. Revert the recall from its waiting status
12. Go back to the Holds to pull page. The record will now show for the hold.
13. Go to the Circulation -> Check in page
14. Go to the menu in the top-right of the page and click Set library
15. Change your library to a different one
16. Check in the item to confirm the recall as waiting and trigger a transfer
17. Go back to the Holds to pull page
19. The item should no longer show on the Holds to pull report
20. Confirm tests pass t/db_dependent/Koha/Holds.t
Sponsored-by: Catalyst IT
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Lisette Scheer <lisette@bywatersolutions.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Brendan Lawlor <blawlor@clamsnet.org>
Signed-off-by: Martin Renvoize <martin.renvoize@openfifth.co.uk>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This patch adds search_attrs to count_holds() since these get
used with CanBookBeReserved.
Test plan:
0. Apply the patch
1. prove t/db_dependent/Koha/Holds.t t/db_dependent/Reserves/HoldGroup.t t/db_dependent/Reserves.t
Signed-off-by: Andrew Fuerste Henry <andrew@bywatersolutions.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Pedro Amorim <pedro.amorim@openfifth.co.uk>
Signed-off-by: Andrew Fuerste Henry <andrew@bywatersolutions.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Bug 15516: Add ability to create and view hold groups from OPAC
This patch adds a "Treat as hold group" to opac-reserve.pl,
which lets OPAC users create a hold group which can include
1+ bibs and either bib-level holds, or item-level holds, or both.
This patch shows the item-level and bib-level holds in a hold group
for the user's holds in the OPAC. This includes both the opac-user.pl
page and the self-checkout hold display.
Bug 15516: (follow-up) Only show hold groups for multi hold in OPAC
Bug 15516: (follow-up) Only show hold groups for multi hold in staff interface
Bug 15516: Add 'DisplayAddHoldGroups' system preference to toggle ability to add titles to hold groups
These patches add the ability to create hold groups across multiple bibs in the staff interface or OPAC.
These hold groups are fulfilled by the first item checked in across the hold group.
Signed-off-by: Pedro Amorim <pedro.amorim@openfifth.co.uk>
Signed-off-by: Andrew Fuerste Henry <andrew@bywatersolutions.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Pedro Amorim <pedro.amorim@openfifth.co.uk>
Signed-off-by: Andrew Fuerste Henry <andrew@bywatersolutions.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This commit is generated using:
% perl misc/devel/tidy.pl
*within* ktd, to get the same version of perltidy than what will be used
by our CI (currently v20230309).
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch adds a method for filtering Koha::Holds resultsets by the
status belonging to Koha's concept of 'found'.
To test:
1. Apply this patch
2. Run:
$ kshell
k$ prove t/db_dependent/Koha/Holds.t
=> SUCCESS: Tests pass!
3. Sign off :-D
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test plan:
1. Make sure syspref "opacbookbag" is set to "Allow".
2. Make sure syspref "HoldsNeedProcessingSIP" is set to "Don't fulfill".
3. Place a hold on an item.
4. Return item via SIP at the pickup library.
5. View biblio in Opac.
6. Note that it says "Available" as status.
7. Add biblio to Cart.
8. Open Cart.
9. Note that it says "Available" as status.
10. Apply patch.
11. Reload Opac page.
12. It should now say "On hold".
13. Reload Card page.
14. It should also say "On hold".
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Rebecca Coert <rcoert@arlingtonva.us>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch makes the method use the new
Koha::Item::Transfers->filter_by_current one.
To test:
1. Run:
$ kshell
k$ prove t/db_dependent/Koha/Holds.t
=> SUCCESS: Tests pass
2. Apply this patch
3. Repeat 1
=> SUCCESS: Tests still pass
4. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Michal Urban <michalurban177@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds a helper method for filtering out cancellation
requested-holds from resultsets, and makes use of it in the OPAC to
filter out those in the current holds tab. Holds history now shows
'Waiting (cancellation requested)' on those.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds that method. Which is covered by new tests.
To test:
1. Apply this patch
2. Run:
$ kshell
k$ prove t/db_dependent/Koha/Holds.t
=> SUCCESS: Tests pass!
3. Sign off :-D
Sponsored-by: Montgomery County Public Libraries
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
TO test:
1 - Find a bib with a single item
2 - Browse to Circulation->Transfer
3 - Transfer the item to another branch
4 - Check the item in at current branch and cancel the transfer on the dialog
5 - Place a hold on the biblio for a patron at current branch
6 - Browse to Circulation->Holds to pull
7 - Item does not show
8 - Apply patch, restart all
9 - Browse to Circulation->Holds to pull
10 - Item shows
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch drops the 'fetch all non-loanable items' query used in the
subsequent query as part of the 'not_in' and instead replaces it with a
simple filter on 'notforloan => 0'
Test plan
Run the included unit tests before and apply applying the followup.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Remove items with a notforloan value other than 0 because items that are
potentially holdable (with negative notforloan status) are not wanted in holds to pull.
Test plan:
1- Have a bib with 2 items, both holdable. Give one of these items a notforloan status with a negative value (like Ordered in the testing docker data).
2- Place a title-level hold on your bib
3- Confirm your bib is showing on Holds to Pull as expected, prompting staff to pull the item that does not have a not for loan status (correct!)
4- Take the item that does not have a not for loan status and check it out to a different patron, make sure not to fill or cancel your hold
5- Reload Holds to Pull, see your title is still listed and now Koha is directing staff to the item with a notforloan status
6- Apply the patch
7- Reload Holds to Pull, see your title with a notforloan status is gone
8- Run `prove t/db_dependent/Koha/Holds.t` and all tests should pass
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This makes two changes:
1 - We no longer call get_items_that_can_fill if there are no holds
2 - The subroutine will return an empty Koha::Items object if there are no holds passed
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
We introduced a tiny bug with a typo in the patchset, the accessor
method is called 'get_column' not 'get_columns'.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
On bug 29844 we decided to remove wantarray from Koha::Objects->search.
Reviewing the difference occurrences I found some unnecessary uses of ->as_list,
where iterators should be used instead.
This patch only removes the obvious places, not the tricky ones.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch adjusts get_items_that_can_fill to make two requests:
first the list of items for item-level holds
second the list of biblionumbers for title-level holds
This stops the report from pulling more items for item-level hold
This patch also removes the aliases used in the code - while readability
is a bit harder, it allows for using 'me' in get_items_that_can_fill
Otherwise, this routine would need a parameter to know what we called the table.
To test:
1 - Find a record with many items available
2 - Place an item level hold for an item on the record, not the one with lowest itemnumber
3 - Run 'Hold to pull' report
4 - Note the barcode does not match
5 - Apply patch
6 - Reload report
7 - It matches!
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
On bug 17591 we discovered that there was something weird going on with
the way we export and use subroutines/modules.
This patch tries to standardize our EXPORT to use EXPORT_OK only.
That way we will need to explicitely define the subroutine we want to
use from a module.
This patch is a squashed version of:
Bug 17600: After export.pl
Bug 17600: After perlimport
Bug 17600: Manual changes
Bug 17600: Other manual changes after second perlimports run
Bug 17600: Fix tests
And a lot of other manual changes.
export.pl is a dirty script that can be found on bug 17600.
"perlimport" is:
git clone https://github.com/oalders/App-perlimports.git
cd App-perlimports/
cpanm --installdeps .
export PERL5LIB="$PERL5LIB:/kohadevbox/koha/App-perlimports/lib"
find . \( -name "*.pl" -o -name "*.pm" \) -exec perl App-perlimports/script/perlimports --inplace-edit --no-preserve-unused --filename {} \;
The ideas of this patch are to:
* use EXPORT_OK instead of EXPORT
* perltidy the EXPORT_OK list
* remove '&' before the subroutine names
* remove some uneeded use statements
* explicitely import the subroutines we need within the controllers or
modules
Note that the private subroutines (starting with _) should not be
exported (and not used from outside of the module except from tests).
EXPORT vs EXPORT_OK (from
https://www.thegeekstuff.com/2010/06/perl-exporter-examples/)
"""
Export allows to export the functions and variables of modules to user’s namespace using the standard import method. This way, we don’t need to create the objects for the modules to access it’s members.
@EXPORT and @EXPORT_OK are the two main variables used during export operation.
@EXPORT contains list of symbols (subroutines and variables) of the module to be exported into the caller namespace.
@EXPORT_OK does export of symbols on demand basis.
"""
If this patch caused a conflict with a patch you wrote prior to its
push:
* Make sure you are not reintroducing a "use" statement that has been
removed
* "$subroutine" is not exported by the C4::$MODULE module
means that you need to add the subroutine to the @EXPORT_OK list
* Bareword "$subroutine" not allowed while "strict subs"
means that you didn't imported the subroutine from the module:
- use $MODULE qw( $subroutine list );
You can also use the fully qualified namespace: C4::$MODULE::$subroutine
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Missing return doesn't allowed for "wantarray" state to DBIXc so sub returned scalar in any context.
Also blank line to match with coding style removed.
Signed-off-by: Andrew Nugged <nugged@gmail.com>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@helsinki.fi>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
After bug 24488 was merged Holds to Pull list (/cgi-bin/koha/circ/pendingreserves.pl)
doesn't respect anymore the 'holdallowed' circulation rules (we bisected it to this change).
If we look at the patch "Bug 24488: Show correct first patron details on Holds to pull"
(2285c2d657) then we can notice that previously the items that were shown in the list
must had holdallowed != 0:
Now it seems like similar circ rule check is missing in the newly rewritten Holds To Pull implementation.
(description copied from comment 0)
Test plan:
Have several pending holds
Mark some item type as not holdable in the circulation rules
Confirm that the non holdable items are no longer listed on the "Holds
to pull" view
Signed-off-by: Andrew Nugged <nugged@gmail.com>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@helsinki.fi>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Andrew Nugged <nugged@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Bug 9978 should have fixed them all, but some were missing.
We want all the license statements part of Koha to be identical, and
using the GPLv3 statement.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This script takes parameters:
days - how many days waiting to concal an unfilled hold on or after
library - (repeatable) branches to consider
holidays - whether or not to count holidays (default is no)
This patchset adds two methods and covers them with tests:
Koha::Holds->unfilled(); To return holds where found = undef
Koha::Hold->age( $use_calendar ); To return the number of days since a
hold was placed (including or excluding holidays)
To test:
1 - Place some holds with varying reservedates
2 - Run script with different parameters to verify options are respected
(-v for verbosity will assist here)
3 - verify that script does nothing without days parameter
Sponsored by:
Siskiyou County Library (http://www.siskiyoulibrary.info/)
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Bug 16187 - Followup
1 - Correct use of original (bad) script name
2 - Explain options better
3 - Remove change from 'W' to 'w'
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
RM note: Squashed for readability
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch removes the need for Carp::Always in .../Reserves/MultiplePerRecord.t
which is not actually used.
It also removes 'undef' from Koha::Holds::forced_hold_level's last return, to comply with
our QA rules.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Reported by Katrin:
Example:
- on shelf holds allowed
- holds allowed 5
- holds on same record allowed 5
- FORCE item level holds
On a record with only one item, you can only place a record level hold
in OPAC now - which is against your circulation conditions.
Another example:
- record with 2 items
- circulation rules as above, 1 hold allowed on the record
- Item level holds: forced
I can only place record level holds in OPAC and staff. At the moment, I
am not able to place item level holds in any circumstances in my
installation.
Test Plan:
1) Apply the unit test patch
2) prove t/db_dependent/Reserves/MultiplePerRecord.t
should fail
3) Apply the second patch
4) prove t/db_dependent/Reserves/MultiplePerRecord.t
should pass
5) Attempt to replicate one of the examples above, you should be unable to
Signed-off-by: Benjamin Rokseth <benjamin.rokseth@kul.oslo.kommune.no>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
* Add tests for CanItemBeReserved returns 'itemAlreadyOnHold' to t/db_dependent/Holds.t
* Don't let GetReserveId explode
* Use search instead of map
* Remove instances of resbarcode
* Fix badly formed li closing tag
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jason M. Burds <JBurds@dubuque.lib.ia.us>
Signed-off-by: Benjamin Rokseth <benjamin.rokseth@kul.oslo.kommune.no>
In a few case (at least systempreferences and export_format (csv profiles),
the type method of Koha::Object and Koha::Objects can be in conflict with the
column names.
Indeed systempreferences.type exists and so the method will return
'Systempreference' (the name of the module) instead of the value of the row in
DB.
I have found at least 1 place where it can cause issue:
In C4::Context->set_preference:
601 my $syspref = Koha::Config::SysPrefs->find( $var );
602 my $type = $syspref ? $syspref->type() : undef;
603
604 $value = 0 if ( $type && $type eq 'YesNo' && $value eq '' );
type will always be 'Systempreference' and the YesNo pref will be set to an
empty string '' instead of 0.
I am not sure about the consequences of this, but it is preferable to
fix it ASAP.
To reproduce:
0/ Do not apply this patch
1/ Edit a YesNo prefs, AutoEmailOpacUser for instance
2/ Set it to "Don't sent"
3/ Check the value in DB, it should be set to an empty string, instead
of 0
4/ Apply this patch and try again. Now the value should be 0
Followed test plan, value is now 0 as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
This is the original patch for bug 12892 and replaces the older style of
fetching the holds data with Koha Objects. It will be used as a
foundation for future features.
Test Plan:
1) Apply this patch
2) Create a hold, set to waiting
3) Browse to circulation.pl for that patron
4) Note you see the list of waiting holds
5) Switch your logged in branch to a different branch
6) Note the "Waiting at" line is no longer emphasized.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Cathi Wiggins <CWIGGINS@ci.arcadia.ca.us>
Signed-off-by: Megan Wianecki <mwianecki@mplmain.mtpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Aleisha Amohia
Marcel de Rooy
Tomas Cohen Arazi
David Cook
Aleisha Amohia
Koha Development Team
Martin Renvoize
Stefan Berndtsson
Kyle Hall
Nick Clemens
Shi Yao Wang
Jonathan Druart
Andrew Nugged