If the hold is not found (e.g. already cancelled), we should
return earlier without crashing:
Can't call method "borrowernumber" on an undefined value at /usr/share/koha/C4/Reserves.pm line 521
(Note: line number from 19.11)
Test plan:
Run t/db_dependent/Reserves.t
Add a hold, go to user menu with holds in OPAC.
At the same time, cancel this hold from staff.
Now click the Cancel in OPAC.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Wainui Witika-Park <wainuiwitikapark@catalyst.net.nz>
If the hold is not found (e.g. already cancelled), we should
return earlier without crashing:
Can't call method "borrowernumber" on an undefined value at /usr/share/koha/C4/Reserves.pm line 521
(Note: line number from 19.11)
Test plan:
Run t/db_dependent/Reserves.t
Add a hold, go to user menu with holds in OPAC.
At the same time, cancel this hold from staff.
Now click the Cancel in OPAC.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Wainui Witika-Park <wainuiwitikapark@catalyst.net.nz>
After looking at Marcel's comments, the problem is in our matching
to hold_fill_targets - rather than adjusting to find filled/waiting holds we
could ensure that hold_fill_targets only refers to the specific hold it
is intended to
This patch is clearer, if slightly less performant than last (we now return all
the reserves and have to find the 'highest')
Test Plan:
1 - Create and use a patron that can place multiple record level holds per record
2 - Create a record with X items, each at a different library
3 - Place X 'Next available' holds on the record for the patron using the 'Holds to place' box
4 - perl misc/cronjobs/holds/build_holdsqueue.pl
5 - Check in LibraryA's copy as LibraryA and confirm the hold
6 - Revisit request.pl for the record, notice the next hold in line is now item-specific
7 - Checkout the item to the patron, notice the remaining hold is marked waiting
8 - Attempt to place another hold for your patron, notice that it requires an item-specific hold
8 - Apply this patch
9 - Repeat steps 1-5
10 - Revisit request.pl for the record, notice the next hold in line has *not* become item-specific
11 - Checkout the item to the patron, ensure the first hold is filled and the second remains record level
12 - Repeat whole test plan without building holds queue to confirm holds are still treated correctly
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
(cherry picked from commit 0bfe336c7b)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
(cherry picked from commit a120656eca)
Signed-off-by: Aleisha Amohia <aleishaamohia@hotmail.com>
To test:
1 - Find or create a record with 10 items
2 - Set sysprefs:
decreaseLoanHighHolds - enable
decreaseLoanHighHoldsDuration - 2
decreaseLoanHighHoldsValue - 2
decreaseLoanHighHoldsControl - 'over the number of holdable items'/dynamic
3 - Set circ rules to allow 1 hold per record on the relevant record
4 - Place 3 holds on the record
5 - Check one item in and confirm hold to set to waiting
6 - Issue to the patron with the waiting hold
7 - Get a notice that loan period is decreased
8 - Don't confirm the checkout
9 - Apply patch
10 - Restart all the things
11 - Repeat checkout, no decrease this time!
Signed-off-by: Christopher Brannon <cbrannon@cdalibrary.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
(cherry picked from commit 96a8710350)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
(cherry picked from commit d59536e289)
Signed-off-by: Aleisha Amohia <aleishaamohia@hotmail.com>
To make sure we are going to display the correct hold's info we need to
pass the reserve_id.
== Test plan ==
1. Add some content to HOLD_SLIP notice, e.g.
<h2>[% branch.branchname %]</h2>
<div>[% biblio.author %]<br>[% biblio.title %]<br>[% item.barcode %]
<ul><li> Reserve ID: [% hold.reserve_id %]</li>
<li>Expiration date: [% hold.expirationdate %]</li></ul>
2. Add 2 holds for 1 patron to a single record
3. Check the reserve IDs in the reserves table - on a clean sandbox, they will be 1 and 2
4. Check in one of the items from the record and print the slip
5. Note that the reserve ID on the slip is 2 and the expiration date is blank
6. Repeated check ins do not change this
7. Check in a second item from the record
8. Note that the reserve ID for this hold is also 2, but this time the expiration date is filled in
9. Check in the first item again - the reserve ID stays as 2, but this time the expiration date is filled in
10. Apply patch
11. cancel the holds to come back to a clean state
(and maybe ensure items aren't in transit)
12. redo the test and see the following differences
13. 1st checkin:
1. expiration date ok
2. the reserve ID is the one of the first hold
14. 2nd checkin:
1. expiration date ok
2. the reserve ID is the one of the second hold
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
(cherry picked from commit d864c5640a)
Signed-off-by: Aleisha Amohia <aleishaamohia@hotmail.com>
It's entirely possible that some libraries are relying on the current
before for part of their workflow. Do to this possibility, it seems like
a good idea to control this behavior via a system preference.
Test Plan:
1) Apply this patch set
2) Run updatedatabase.pl
3) Set TrapHoldsOnOrder to "don't trap"
4) Set an item's notforloan value to -1
5) Place a hold on that item
6) Check in the item
7) Note the item is not trapped for hold
9) Set TrapHoldsOnOrder to "trap"
10) Check in the item
11) Koha should now ask if you'd like to trap the item for the hold!
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Joy Nelson <joy@bywatersolutions.com>
Negative notforloan statuses should allow holds to be placed but not captured.
Due to coronavirus, we have libraries setting all returned materials to a negative notforloan value of Quarantine for several days.
They're using UpdateNotForLoanStatusOnCheckin to set that status automatically. However, those items are still capturing for holds,
even though those items cannot be checked out until the notforloan status is removed.
In cases like an On Order item where we do want the hold to fill at checkin,
UpdateNotForLoanStatusOnCheckin should be used to clear that notforloan status so the hold can fill.
In master, if I set an item to a not for loan but holdable status ( < 0 ) I can place the hold,
capture the hold and set it to waiting, but *not* check it out to the patron!
This does not make sense. I should not be able to trap an item for checkout unless it can be checked out.
Test Plan:
1) Set an item's notforloan value to -1
2) Place a hold on that item
3) Check in the item
4) Trap the item for that hold
5) Attempt to check the item out to the patron, you will be unable to
because it is notforloan
6) Apply this patch
7) Restart all the things!
8) Repeat steps 1-3
9) The screen should no longer ask if the item should be trapped
to fill the hold!
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Catherine Ingram <Catherine.Ingram@cedarparktexas.gov>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Joy Nelson <joy@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Bug 24620: Close existing transfers when setting item to waiting
This patch adds a clause in ModReserveAffect to check if there
are existing transfers and close them when setting a hold to waiting
To test:
1 - Set AutomaticItemReturn to Do
2 - Checkin an item from Library B at Library A
3 - Confirm item is in transfer (check the details page)
4 - Place a item level hold for pickup at library A
5 - Checkin the item at Library A
6 - Confirm the hold
7 - View the details page
8 - Note the item is in transit and waiting
9 - Apply patch
10 - Delete hold and repeat
11 - Confirm that transfer is closed when hold marked waiting
Signed-off-by: Sally <sally.healey@cheshirewestandchester.gov.uk>
Signed-off-by: Stina Hallin <stina.hallin@ub.lu.se>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Bug 24620: Fix test, remove replaced code, use dt_from_string
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Joy Nelson <joy@bywatersolutions.com>
It seems like ModReserveFill and ModReserveAffect should both produce action logs for holds.
Test Plan:
1) Apply this patch
2) Place a hold
3) Check in the item to trap the hold
4) Check out the item to fill the hold
5) Check the action logs for that reserve id
6) Note the new logs!
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Joy Nelson <joy@bywatersolutions.com>
Currently when fixing priorities of existing holds, priorities aren't
fixed when checking out a middle priority hold because the hold has been
fulfilled and deleted. This patch adds a check for, if the hold can't be
found, an old hold with the required reserve_id.
To test:
1. Place at least four holds on a biblio for different borrowers
2. Check out an item to the 3rd priority borrower
3. Check the existing holds table for the biblio. The priorities might be
out of order, or try clicking the dropdowns and there might be an empty
dropdown option, or open the browser developer tools and notice the option
values in the select are missing value=3.
4. Apply patch and restart memcached
5. Check out an item to the 2nd priority borrower
6. Check the existing holds table for the biblio. Confirm the priorities
have been fixed and are now consecutive with no gaps.
Sponsored-by: Chartered Accountants Australia and New Zealand
Signed-off-by: Emmi Takkinen <emmi.takkinen@outlook.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Joy Nelson <joy@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Joy Nelson <joy@bywatersolutions.com>
and remove 'scalar' keyword in calls where it's not needed.
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Joy Nelson <joy@bywatersolutions.com>
Signed-off-by: Hans Palsson <hans.palsson@hkr.se>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Joy Nelson <joy@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
To test:
1 - Checkout an item to a patron
2 - Make sure 'ReservesNeedReturn' is set to 'Automatically'
3 - Place an item level hold on the checked out item
4 - Note the hold is marked waiting
5 - Delete the hold
6 - Apply patch
7 - Place a new hold
8 - Hold is not marked waiting
9 - Please a hold on a different item
10 - Note it is marked waiting
11 - Test when item is damaged and hold not allowed on damaged items
12 - Test when item is in transit
13 - Test when item has another hold
14 - Only in the case where none of the above are true should the hold be marked waiting
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch restores the behavior prior to bug 21206.
If "Hold pickup library match" is "Not set", then
hold_fulfillment_policy equals an empty string.
Test plan:
1. Go to "Circulation and fines rules"
2. Under "Default checkout, hold and return policy", unset "Hold pickup
library match" and Save
3. Place a hold on one item for one patron
4. Try to checkout the same item with another patron
=> Without this patch you the checkout list do not show, and the logs
contain "The method Koha::Item-> is not covered by tests!"
=> With this patch applied you see the checkout list
QA will take care of comparing the statement with the one before bug 21206
and make sure they are equivalent
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch updates all cases where debit_type_code was 'Res' to
'RESERVE' which is more informative and consistent with the new style
guidelines.
The patch also ensure all calls to add_debit with a type or 'reserve'
now pass the capitalised code instead.
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Test plan:
1. Place some holds
2. Go to the 'Holds' tab of the biblio record
3. Modify dates in the table and click on 'Update holds' button
4. Verify that dates have been correctly updated
Signed-off-by: Maryse Simard <maryse.simard@inlibro.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
The SIP2 interface has long used a set of accounttypes to denote payment
types. Now we have an authorised list of payment_types and a
payment_type field in accountlines this patch alters the logic to use
it.
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
MoveReserve uses CheckReserves to see if the current patron has any holds
on the title they are checking out, however, CheckReserves doesn't return
all holds on a biblio, it returns holds on the item from the holdsqueue
if they exist
This can create a condition where we check holds on an item, find we have it planned for
another borrower, confirm checkout to the current borrower, but don't fill their hold
To test:
1) Find record
2) place record level holds for 2 different patrons (record level)
3) Run holds queue builder, check the queue to confirm an item was selected for patron 1
Circulation->Holds queue->Library="All"
4) Check out the item queued for patron with priority 1 to the second patron
5) You should be asked to confirm, do so
6) Note the item checks out, but both holds remain
7) Apply patch
8) Check in the item
9) Don't confirm the hold
10) Check the holds on the record and the holds queue
11) Patron 1 should be priority 1 with an item selected from the holds queue
12) Checkout to patron 2 as before
13) Note the hold for patron 2 is filled this time
14) Prove -v t/db_dependent/Reserves.t
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
To test:
0 - Make sure ExpireReservesMaxPickupDelay is set to 'Don't allow'
1 - Place a hold for a patron
2 - Check in at another library to set it in transit
3 - Update expirationdate of hold to be in the past
UPDATE reserves SET expirationdate='1999-12-31'
4 - Run cancel_expired_holds.pl
5 - Hold is not canceled
6 - Apply patch
7 - Run again
8 - Hold is cancelled
Signed-off-by: Claire Gravely <claire.gravely@bsz-bw.de>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
When the waiting status of a hold is revert we want to preserve the
level hold preference of the user.
Test plan:
Place a hold at biblio level
Confirm the hold
Revert the waiting hold
=> The hold must still be considered as a biblio level hold ("next
available item")
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Almost everywhere we call IsAvailableForItemLevelRequest we already have
a Koha::Patron and Koha::Item object. It makes sense to use them to
avoid a refetch
Test plan:
It would be good to test this patch on top of 19300 and 19301 and make
sure everything works as expected
Signed-off-by: Hayley Mapley <hayleymapley@catalyst.net.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Test plan:
1) Apply all patches except this one
2) Checkout out an item to a patron
3) Check the item in - note that this will fail
4) Apply this patch, and repeat steps 1-3, noting instead that the the
check is instead successful
5) Verify also that reserves act as expected
5) Sign off
Sponsored-by: Catalyst IT
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch adds a new syspref "UpdateItemLocationOnCheckin" which
accepts pairs of shelving locations. On check-in the items location is
compared ot the location on the left and, if it matches, is updated to
the location on the left.
This preference replaces ReturnToShelvingCart and
InProcessingToShelvingCart preferences. The update statement should
insert values that replciate these functions. Note existing
functionality of all items in PROC location being returned to
permanent_location is preserved by default. Also, any items issued from
CART location will be returned to their permanent location on issue (if
it differs)
Special values for this pref are:
_ALL_ - used on left side only to affect all items
_BLANK_ - used on either side to match on/set to blank (actual blanks
will work, but this is an easier to read option)
_PERM_ - used on right side only to return items to permanent location
Test Plan:
1) Apply this patch
2) Run updatedatabase.pl
3) Set the new system preference UpdateitemLocationOnCheckin
to the following (assuming sample data):
NEW: FIC
FIC: GEN
4) Create an item, set its location to NEW
5) Check in the item, note its location is now FIC
6) Check in the item again, note its location is now GEN
7) Check in the item again, note its location remains GEN
8) Test using _ALL_, _BLANK_ and _PERM_ for updates
9) Try entering various incorrect syntax in the pref and note you are warned
Sponsored by:
Arcadia Public Library (http://library.ci.arcadia.ca.us/)
Middletown Township Public Library (http://www.mtpl.org/)
Round Rock Public Library (https://www.roundrocktexas.gov/departments/library/)
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
To test:
1 - Set a default holds plicy for an item type as 'from home library'
2 - Set CircControl to 'logged in library'
3 - Log in as staff from a library without the rule set
4 - Note you can set holds for patrons of any library on items of type
above
5 - Toggle ReservesControlBranch and note that nothing changes
6 - Toggle CircControl and note some combinations don't allow holds
7 - Apply patch
8 - Toggle ReservesControlBranch and note that holdability is affected
9 - Toggle CircControl and note holdability does not change
10 - Read the note on admin/smartrules.pl and confirm it makes sense
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch makes changes to the way hold fees are recorded and displayed
in the OPAC and staff client:
- No English strings should be stored in the accountline description.
- The accounttype code should be used to display what kind of charge it
is.
To test, apply the patch and go to the staff client:
- Configure a patron category to have a hold fee.
- Place one or more holds for a patron in that category.
- On the patron's record, view Accounting -> Make a payment
- There should be a separate column for "Account type" showing "Hold
fee" for the hold charges.
- There should be no "Res" or "Reserve Charge" text in the
description column--just the title.
- Switch to the "Transactions" tab. The display should be similar.
- In the OPAC, log in as a patron who has hold fees on their account.
- View the "your fines" page to confirm that the information is
displayed correctly there as well.
- Place a hold for a patron who incurs hold charges.
- Log in to the self-checkout module as that patron and check out an
item which will fulfill that hold.
- The correct fine information should be saved to accountlines: A "Res"
type with a description consisting only of the title.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
The crux of this issue is that all those holds are unfilled record level holds. The code that checks for the number of holds the user already has *always* uses a branchcode of some form. Because of this, any open record level holds are completely ignored for this purpose.
Test Plan:
1) Set ReservesControlBranch to "item's home library"
2) Set an All libraries/All Patrons/All itemtypes rules limiting a patron to 2 holds
3) Place 3 record level holds, you can but you should not be able to!
4) Delete the holds
5) Apply this patch
6) Attempt to place 3 record level holds
7) Note that you cannot!
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch adds the 'interface' field to the accountlines table and
updates all Koha::Object routines and calls to use it.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
A series of ternaries were introduced when we moved to add_debit which
defaulted to 'user 0' should a userenv not be set. This was incorrect
as userenv may well not be set (during cronscript runs for example) and
the new constraint would not allow such a default. We switch to 'undef'
here to satisfy the constraint.
Test plan
1) Ensure you have data in your system that would be caught by the
longoverdues cronjob.
2) Ensure you're sysprefs are setup to charge for lost items
3) Run the script and varify it runs to completion without errors
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Branch transfer limits are respected for placing holds in the OPAC but nowhere else. This should be remedied.
Test Plan:
1) Set up a branch transfer limit from Library A to Library B
2) Verify you cannot set up a hold for an item from Library A for pickup at Library B from the staff interface ( without overriding )
3) Verify you cannot place that hold via ILS-DI
4) Verify you cannot place that hold via SIP
4) Verify a forced hold from Library A to Library B will not show up in the holds queue
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch makes the mentioned method use the biult-in method for
resuming a suspended hold, instead of manually setting the specific
attributes using the accessors.
The side effect for this is that HoldsLog is now honoured.
This patchset also refactors the tests a bit so they rely on the exposed
methods and thus don't rely on specific implementation details (like
suspended hold means a date in suspended_until plus suspended=1).
To test:
- Apply the regression tests patch
- Run:
$ kshell
k$ prove t/db_dependent/Reserves/AutoUnsuspendReserves.t
=> FAIL: It fails loudly because things are done manually
- Apply this patch
- Run:
k$ prove t/db_dependent/Reserves/AutoUnsuspendReserves.t
=> SUCCESS: Tests pass!
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Note: This is here for information purpose, feel free to test it if you
wan to play with it.
TODO: C4::Reserves::_get_itype is not longer in use
No more GetItem must be returned by:
git grep GetItem|grep -v GetItemsAvailableToFillHoldRequestsForBib|grep
-v GetItemsForInventory|grep -v GetItemsInfo|grep -v
GetItemsLocationInfo|grep -v GetItemsInCollection|grep -v
GetItemCourseReservesInfo|grep -v GetItemnumbersFromOrder|grep -v
GetItemSearchField|grep -v GetItemTypesCategorized|grep -v
GetItemNumbersFromImportBatch|cut -d':' -f1|sort|uniq
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch adds $branchcode_to parameter to CanBookBeReserved and
CanItemBeReserved. It represents the pickup location for the hold. This patch
checks if the library is configured to be a pickup location (see Bug 7534), and
also if the item can be transferred into the given library (see Bug 18072).
To test:
1. prove t/db_dependent/Holds.t
Signed-off-by: Bob Bennhoff <bbennhoff@clicweb.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch fixes a bug in ChargeReserveFee:
To test:
- Run:
$ kshell
k$ prove t/db_dependent/Reserves.t
=> FAIL: Tests fail because branchcode is not set
- Apply this patch
- Run:
k$ prove t/db_dependent/Reserves.t
=> SUCCESS: Tests pass!
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
For the purposes of statistics, it appears that it would help many
libraries to have branchcode recorded in the accountlines table. For
payments, the field would contain the code for the branch the payment
was made at. For manual invoices, it would be the code of the library
that created the invoice.
Test Plan:
1) Apply this patch set
2) Create and pay some fees
3) Note the branchcode for those fees and payments is set
to your logged in branch
Signed-off-by: Lisette Scheer <lisetteslatah@gmail.com>
Signed-off-by: Lisette Scheer <lisetteslatah@gmail.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
While it doesn't have a practical effect (the variable is reset several
lines below) I agree this should be explicitly set to its default.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch implements the required changes in
C4::Reserves::CanItemBeReserved so it implements a daily limit on holds.
It returns the 'tooManyReservesToday' string if the policy doesn't allow
placing the hold. It returns 'OK' (current behaviour) otherwise.
To test:
- Run:
$ sudo koha-shell kohadev
k$ cd kohaclone
k$ prove t/db_dependent/Holds.t
=> FAIL: Tests fail because the error condition is not making
CanItemBeReserved return the desired error code.
- Apply this patch
- Run:
k$ prove t/db_dependent/Holds.t
=> SUCCESS: Tests pass!
- Sign off :-D
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Koha::CirculationRules->get_effective_rule will become the method to
call to retrieve a specific rule, we should start using it when
possible.
Moreover undef could replace '*' to mean 'any', that way we will be able
to add FK on circulation_rules
TODO: Add more tests
Signed-off-by: Lisette Scheer <lisetteslatah@gmail.com>
Signed-off-by: Jesse Maseto <jesse@bywatersolution.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This is the first step in the circulation rules revamp as detailed
in the RFF https://wiki.koha-community.org/wiki/Circulation_Rules_Interface_and_Backend_Revamp_RFC
This patch moves the recent max_holds rule to the new circulation_rules table.
Test Plan:
1) Apply this patch
2) Run updatedatabase.pl
3) Go to the circ rules editor, note the new max holds rules
by patron category in the "Checkout limit by patron category".
( Should we rename this section? )
4) Create find a patron that is allowed to place a hold, count the
number of holds that patron has. Lets make that number 'X'.
5) Set the new max holds rule to X for "All libraries"
6) Note the patron can no longer place another hold
7) Set the new max holds rule to X + 1 for the patron's home library
8) Note the patron can again place another hold
9) Set the new max holds rule to X for the patron's home library
10) Note the patron can no longer place another hold
Signed-off-by: Lisette Scheer <lisetteslatah@gmail.com>
Signed-off-by: Jesse Maseto <jesse@bywatersolution.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Marcel de Rooy
Wainui Witika-Park
Nick Clemens
Jonathan Druart
Kyle M Hall
Aleisha Amohia
Julian Maurice
Martin Renvoize
Hayley Mapley
Owen Leonard
Tomas Cohen Arazi
Alex Arnaud
Lari Taskula