This patch adds a check for the ArticleRequests system preference in
opac-request-article.pl so that the page will return a 404 error if the
preference is disabled.
To test, apply the patch and restart services.
- If necessary, enable the ArticleRequests system preference and
configure a circulation rule to allow article requests.
- Locate a bibliographic record in the OPAC which will accept an article
request. Note the biblionumber of the record you select.
- Click "Request article" and complete the process. It should finish
successfully.
- Disable the ArticleRequests system preference.
- Return to the OPAC and navigate directly to the page for requesting an
article:
http://localhost:8080/cgi-bin/koha/opac-request-article.pl?biblionumber=X
...where X is the biblionumber you noted before.
- This should trigger a 404 error.
Sponsored-by: Athens County Public Libraries
Signed-off-by: Bastien CHAUVET <bastien.chauvet@inlibro.com>
Signed-off-by: Laura_Escamilla <laura.escamilla@bywatersolutions.com>
Signed-off-by: Pedro Amorim <pedro.amorim@openfifth.co.uk>
Previously, the system preference
PatronSelfRegistrationBorrowerUnwantedField was used to remove hidden
fields regardless of whether the operation was self-registration or
self-modification. This patch uses the appropriate set of hidden fields
depending on the current operation (create/update).
Test plan:
1. Set OPACPatronDetails to "Allow".
2. Ensure PatronSelfModificationBorrowerUnwantedField is empty.
3. Set PatronSelfRegistrationBorrowerUnwantedField to exclude
Title (towards the bottom right of the modal).
4. Log into the OPAC, and navigate to Your account > Personal details.
5. Change your title and submit the request.
6. Verify you see the notice "No changes were made." at the top of the
page.
7. Apply patch.
8. Change your title again and submit the request.
9. Verify the request is submitted successfully.
10. Return to the personal details screen, but don't submit.
11. Set PatronSelfModificationBorrowerUnwantedField to exclude Title.
12. On the preloaded personal details screen, update the title and
submit.
13. Verify you see the notice "No changes were made." at the top of the
page.
Sponsored-by: Open Fifth
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Pedro Amorim <pedro.amorim@openfifth.co.uk>
This follow-up includes the following changes:
- only allow a recall cancellation via the OPAC if UseRecalls is enabled for the OPAC.
- uses singleBranchMode var passed by C4::Auth in staff interface biblio recalls
- drops unused attribute_type_codes var
- drops unnecessary items var and uses biblio.items in template
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Pedro Amorim <pedro.amorim@openfifth.co.uk>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Pedro Amorim <pedro.amorim@openfifth.co.uk>
To be more flexible we could allow the top-level domain instead of
having a predefined list.
However this patch still list the different available options (and adds
Brazilian) for easy selection.
Note that this system preference is not used to retrieve the image but
only to link to from the image. Contrary to what the reporter of the bug
report thought. And actually what I thought as well until I finished to
write the patch and started testing it!
Anyway now the patch is written, there should not be any changes in
behaviour. Most of the time the links are actually broken when not using
.com. So I think we either broke the whole feature at some point, or it
never really worked. On a separate bug we could eventually have a look
at fetching from the locale tld.
Test plan:
Turn on OPACAmazonCoverImages and AmazonCoverImages
http://localhost:8081/cgi-bin/koha/catalogue/detail.pl?biblionumber=5http://localhost:8080/cgi-bin/koha/opac-detail.pl?biblionumber=5
=> You see the PBP cover
click on it, it opens the lightbox, click "(see the original image)" at
the bottom
=> This is where the syspref AmazonLocale/AmazonLocaleTld acts
Modify the syspref's value and confirm that the link is modified and
point to the correct domain (leading to 404 or broken pages most of the time,
at least in my tests).
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Pedro Amorim <pedro.amorim@openfifth.co.uk>
1. APPLY PATCH, updatedatabase, restart_all
2. Search for the new AutoDeleteFromCartWhenHoldPlaced system preference
3. Turn it on for both staff and OPAC
4. From the staff interface put some items in your cart.
5. Place a hold on all of them.
6. Once the hold(s) have been successfully done those items should no longer be in your cart.
7. Put more items into your staff cart, place a hold on some of them but not all.
8. Only the items you have placed a hold on should be removed.
9. Go to the OPAC and put some items in your cart.
10. Place a hold on all of them, those items should now be deleted from the cart.
11. Place more items into your OPAC cart, place a hold on some of them but not all.
12. Only the items you have placed a hold on should be removed.
13. Switch the AutoDeleteFromCartWhenHoldPlaced to only be for 'staff'.
14. Try steps 4-8 again.
15. Switch the AutoDeleteFromCartWhenHoldPlaced to only be for 'opac'.
16. Try steps 9 -12 again.
Signed-off-by: Sam Lau <samalau@gmail.com>
Signed-off-by: Sarah Fletcher <sfletcher@ncwlibraries.org>
Signed-off-by: Pedro Amorim <pedro.amorim@openfifth.co.uk>
Similar test plan, but on the OPAC
Signed-off-by: Phil Ringnalda <phil@chetcolibrary.org>
Signed-off-by: Matt Blenkinsop <matt.blenkinsop@openfifth.co.uk>
Signed-off-by: Pedro Amorim <pedro.amorim@openfifth.co.uk>
When every result on a page is hidden (OpacHiddenItemsHidesRecord), rather
than leaving the patron on a dead-end "not available" page, look ahead a
bounded number of pages (3) for one with visible results and redirect
there directly. The lookahead is capped so a library with many
consecutive hidden pages doesn't turn a single search into a long chain
of extra search-engine queries; RSS/atom/opensearchdescription requests
are left alone since redirecting a feed reader makes no sense.
Whenever a hidden page was skipped over (whether we found a visible page
to land on, or exhausted the lookahead and fell back to the "not
available" message), show a caveat next to the results count so the
"Your search returned N results" figure doesn't read as contradicting
what the patron can actually see - this was raised as a sign-off concern
on the original patch (comment 4).
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Pedro Amorim <pedro.amorim@openfifth.co.uk>
Zeroing $hits alongside the no_page_results flag also zeroed $total
(since $total accumulates $hits, and the final template 'total' param
is set from $hits/$total). Because the top "No results found!" banner
and the entire search-results section are both gated on 'total' being
true, this meant the new no_page_results branch could never actually
render: whenever it was true, 'total' was false, so the classic
"No results found!" page won instead - recreating the exact bug this
patch is meant to fix.
Verified against the bug's own test plan (OPACnumSearchResults=5,
OpacHiddenItemsHidesRecord, OpacHiddenItems: withdrawn:[1], 6 bibs with
the first 5 withdrawn/hidden): before this change, page 1 still showed
"No results found!" with no pagination; after this change, it shows
"Your search returned 6 results" / "Search results on this page are
not available", with a working pagination link to the page containing
the visible record.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Pedro Amorim <pedro.amorim@openfifth.co.uk>
Signed-off-by: Martin Renvoize <martin.renvoize@openfifth.co.uk>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Pedro Amorim <pedro.amorim@openfifth.co.uk>
This issue occurs when the records on the first page of results are not displayed. The message "No results found" is shown, and it is not possible to access records on other pages.
To test
1. Set the following system preferences:
OPACnumSearchResults to 5
OpacHiddenItemsHidesRecord to Hide
OpacHiddenItems to withdrawn: [1]
2. Create 6 bibliographic records with the following titles:
"notice test 1"
"notice test 2"
"notice test 3"
"notice test 4"
"notice test 5"
"notice test 6"
3. For the first 5 records, add an item with Withdrawn status.
4. For "notice test 6", add an item with Available status.
5. In the OPAC interface, search for "notice test".
6. Apply the patch
7. Repeat step 4
---> The results table is now shown with the message: "Search results on this page are not available."
---> You can now access the second page and see "notice test 6"
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@openfifth.co.uk>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Pedro Amorim <pedro.amorim@openfifth.co.uk>
The web-based self-checkout (opac/sco/sco-main.pl) builds the
response JWT cookie with -expires => $jwt ? '+1d' : ''. On logout
$jwt is undef, so the cookie is sent with an empty value and no
Expires attribute - i.e. a session cookie with an empty value
rather than a deletion. Some browsers/proxies retain the previous
valid JWT in this scenario, which presents as the Finish/close
button "doing nothing" or working only intermittently: the patron
appears to remain logged in despite clicking Finish.
Use a past Expires ('-1d') when no JWT is present so the browser
deletes the cookie entirely. The subsequent ?op=logout render
cannot then rediscover the patron from a stale cookie.
Test plan:
1. Enable web-based self-checkout (SelfCheckoutByLogin or
SelfCheckAllowByIPRanges).
2. Log in as a patron at /cgi-bin/koha/sco/sco-main.pl.
3. Open DevTools -> Application -> Cookies and note the JWT cookie.
4. Click the green "Finish" button.
5. Without the patch: Set-Cookie on the ?op=logout response shows
JWT= with no Expires; the cookie persists as an empty session
cookie.
6. With the patch: Set-Cookie shows JWT=; expires=<past date>; the
browser removes the cookie entirely.
7. Confirm the kiosk reliably returns to the login screen and
subsequent page loads do not re-authenticate from a stale JWT.
Sponsored-by: OpenFifth
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Emmi Takkinen <emmi.takkinen@koha-suomi.fi>
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Pedro Amorim <pedro.amorim@openfifth.co.uk>
When OpacSuppression is enabled, records marked as suppressed
(biblio.opac_suppressed = 1) still appear in public lists viewed
through the OPAC. This is confusing for patrons.
This patch adds a filter_by_not_suppressed method to
Koha::Virtualshelfcontents and uses it in opac-shelves.pl to
exclude suppressed records from list display when OpacSuppression
is enabled. OpacSuppressionByIPRange is respected: users within
the allowed IP range still see all records.
Test plan:
1. Apply patch
2. Enable OpacSuppression system preference
3. Create a public list and add some titles to it
4. Suppress one of the titles (set 942$n = 1)
5. View the list in the OPAC
=> SUCCESS: Suppressed record is no longer shown in the list
6. Set OpacSuppressionByIPRange to match your IP (e.g. 127.)
7. Repeat step 5
=> SUCCESS: All records (including suppressed) are shown
8. Run:
$ ktd --shell
k$ prove t/db_dependent/Virtualshelves.t
=> SUCCESS: Tests pass!
9. Sign off :-D
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Laura_Escamilla <laura.escamilla@bywatersolutions.com>
Signed-off-by: Pedro Amorim <pedro.amorim@openfifth.co.uk>
GetNormalizedUPC duplicated logic already available via the
MetadataExtractor (Bug 34828) and exposed as $biblio->normalized_upc.
All callers migrated:
- Scripts with $biblio available: use $biblio->normalized_upc
- C4::Search (only MARC::Record): reuses the extractor instance
already created for OCLC
Assisted-by: Sonnet 4.6 (Anthropic)
Test plan:
1. Apply patch
2. Run:
$ ktd --shell
k$ prove t/db_dependent/Koha.t \
t/db_dependent/Koha/Biblio.t
=> SUCCESS: Tests pass
3. Verify UPC numbers still display in OPAC and staff detail pages
(Syndetics cover images)
4. Sign off :-D
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Pedro Amorim <pedro.amorim@openfifth.co.uk>
Replaces all calls to GetNormalizedOCLCNumber() and
Koha::Util::MARC::oclc_number() with the extractor pattern.
OPAC scripts pass their already ViewPolicy-filtered $record directly
to the extractor. This preserves the existing filtering behavior
without introducing new abstraction layers:
Koha::Biblio::Metadata::Extractor->new( { metadata => $record } )->get_normalized_oclc
Intranet scripts and the Koha::Biblio convenience method use the
raw cached extractor (035 visibility is not affected by ViewPolicy
in practice, and intranet doesn't filter):
$biblio->normalized_oclc
Test plan:
1. Verify OCLC numbers display on OPAC detail, ISBD, MARC detail
2. Verify staff catalogue detail and search results
3. prove t/db_dependent/Koha/Biblio.t
Signed-off-by: Martin Renvoize <martin.renvoize@openfifth.co.uk>
Assisted-by: Sonnet 4.6 (Anthropic)
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Pedro Amorim <pedro.amorim@openfifth.co.uk>
This change fixes the branch comparison between the Page
and the user. Previously, it was doing a numeric "!=" and now it
does the string comparison "ne". Also, if no environmental variable
is set for the default branch, it defaults to an empty string
for anonymous (ie non-authenticated) users.
Test plan:
0. Apply the patch
1. restart_all
2. Log into the staff interface
3. Go to Tools
4. Click on "Pages"
5. Create a Page for All Libraries for the OPAC
6. Copy the "OPAC" link in the "Page URL" table cell and open it
in a private window or a separate browser
7. Note that the page appears
8. Now change the "Page" to a specific library
9. Revisit the URL in the private window
10. Note that it now gives a 404 error
11. Log into the OPAC with a user whose library matches the libary
of the Page
12. Note that now you can view the URL again
13. Change the library of the user or the Page
14. Note that you cannot see the Page now
Signed-off-by: Phil Ringnalda <phil@chetcolibrary.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Pedro Amorim <pedro.amorim@openfifth.co.uk>
When the EnableZotero system preference is enabled, allow the utf8 format
in opac-export.pl regardless of the OpacExportOptions settings.
This enables Zotero integration by ensuring the required UTF-8 encoded
MARC format is always available when the feature is enabled.
To test:
1. Install Zotero (https://www.zotero.org)
2. Install the browser extension (I did in in Chrome, not sure it exists for FF)
3. Perform a search in your koha instance. e.g. http://kohadev.localhost/cgi-bin/koha/opac-search.pl?idx=&q=agrovoc&weight_search=1
4. Open the Zotero extension
=> SUCCESS: It lists the search results for saving them
5. Choose one and save
=> FAIL: It says there was an error saving
6. Apply this patches
7. Run:
$ ktd --shell
k$ updatedatabase
8. Make sure EnableZotero is enabled
9. Repeat 3-5
=> SUCCESS: All good this time
10. Sign off :-D
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@openfifth.co.uk>
Signed-off-by: Pedro Amorim <pedro.amorim@openfifth.co.uk>
Correct genuine spelling errors identified by the codespell 2.4.x
full scan after the KTD container OS upgrade. Changes are in
comments, POD, strings, and template text across 55 files.
"SAN Ouest Provence" (the French library co-operative and Koha
sponsor) is preserved as a proper noun. Perl copyright lines
receive an inline # codespell:ignore annotation; about.tt files
(contributor attribution pages) are added to the Koha::Devel::Files
codespell exception list so that future uses of "Provence" as a
typo for "Province" are still caught in all other files.
Notable user-visible fixes:
- "submiting" -> "submitting" in authority and bibliographic merge screens
- "deleteable" -> "deletable" in patron exception messages
- "Acquistions" -> "Acquisitions" in reports dictionary
Test plan:
1. Apply patches
2. In the staff interface, go to Cataloguing > Merge records and
confirm the submit button reads "Submitting" (not "Submiting")
3. In the staff interface, go to Authorities > Merge and confirm
the same correction
4. Attempt to delete a patron with outstanding issues and confirm
the error message reads "deletable" (not "deleteable")
5. prove xt/author/codespell.t
=> All tests pass
Signed-off-by: Pedro Amorim <pedro.amorim@openfifth.co.uk>
To test:
1 - enable DisplayAddHoldGroups
2 - place two ungrouped holds for a patron
3 - log into the opac as your patron, see 2 pending holds
3 - group the two holds
4 - reload OPAC, still see 2 pending holds
5 - Apply patch, restart_all
6 - reload OPAc, see 1 pending holds
7 - ungroup holds
8 - reload OPAC, see 2 pending holds
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Building on bug 41918, it would be good to limit the number of reports
a given user can run at a time. This control is config-file based as
it is tied to the server resources provided by the administrator.
Adds a new koha-conf.xml option total_running_reports_per_user_limit
(0 = disabled). When the configured limit is reached, the user is told
"You have too many reports running at the moment. Please wait for some
of them to finish before running this report again."
Note on implementation: the original patch on bz (attachment 198034)
performed a second pre-flight Koha::Reports->running call in
reports/guided_reports.pl. The bug 41918 QA follow-ups already pushed
the duplicate-running guard into Koha::Report::prep_report so it would
fire across the staff UI, svc/report and opac/svc/report. This patch
extends that same model-layer architecture rather than reintroducing
controller-layer enforcement:
- New Koha::Exceptions::Report::TotalRunning subclass of
Koha::Exceptions::Report.
- prep_report now performs a second check after the duplicate one and
throws TotalRunning when the user has total_running_reports_per_user_limit
reports of any kind already in flight.
- All three callers (guided_reports.pl, svc/report, opac/svc/report)
catch the new exception alongside DuplicateRunning, mapping it to a
new template error key total_running_reports_limit_exceeded for the
staff UI and a JSON {error: total_running_reports_limit_exceeded}
with HTTP 429 for the JSON endpoints.
Test Plan:
1) Set total_running_reports_per_user_limit to 3 in your koha-conf.xml.
2) Create 3 long-running reports like:
SELECT COUNT(*) FROM items i1 JOIN items i2 JOIN items i3 JOIN items i4 JOIN items i5 JOIN items i6
3) Run each report in turn by opening a new tab, browsing to the
reports module, and choosing to run that report.
4) Note the first three continue to run, but a fourth attempt gives
the new "too many reports running" alert in the staff UI.
5) Repeat against /cgi-bin/koha/svc/report?id=N and confirm an HTTP
429 response with JSON {error: total_running_reports_limit_exceeded}.
6) Set total_running_reports_per_user_limit back to 0 and confirm
normal behaviour resumes.
7) prove t/db_dependent/Koha/Reports.t -> 13 tests pass, including a
new subtest for TotalRunning.
Signed-off-by: Alex Carver [Acerock7] <alex@rcls.org>
Signed-off-by: Martin Renvoize <martin.renvoize@openfifth.co.uk>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
The previous patches enforced duplicate_running_reports_per_user_limit
only in reports/guided_reports.pl. Two other code paths run saved SQL
reports for an authenticated user and bypassed the guard entirely:
- svc/report (staff JSON endpoint, eg. used for chart widgets and any
caller hitting /cgi-bin/koha/svc/report?id=N directly)
- opac/svc/report (OPAC JSON endpoint)
A user who hit their staff-UI limit could still spawn additional copies
of the same long-running report via either svc endpoint, defeating the
guard.
Push the check into Koha::Report::prep_report itself, which is the one
function all three callers go through. When the limit is reached
prep_report now throws a new Koha::Exceptions::Report::DuplicateRunning
(carrying report_id, user_id and the configured limit). The guided
reports CGI catches it and re-renders the existing "report is already
running" alert; both svc/report endpoints catch it and return HTTP 429
Too Many Requests with a JSON { error: "duplicate_running_report" }
payload.
Notes:
- The pre-flight Koha::Reports->running call is removed from the
guided-reports CGI; the model now owns that policy and the
controller is just rendering. The TOCTOU window remains identical
in size and is the same intentional trade-off as before.
- Limit=0 (the default) and absent userenv both bypass the check, so
CLI cronjobs (misc/cronjobs/runreport.pl) and direct DB users are
unaffected.
Test plan:
1) prove t/db_dependent/Koha/Reports.t - now includes a new subtest
covering limit=0 (lives), under limit (lives) and at limit (throws
Koha::Exceptions::Report::DuplicateRunning).
2) Set duplicate_running_reports_per_user_limit=1 in koha-conf.xml,
restart_all.
3) Open a long-running report in two staff tabs - second tab shows
the "report is already running" alert (unchanged behaviour).
4) While one run is in flight, hit /cgi-bin/koha/svc/report?id=N as
the same user - now returns HTTP 429 with the JSON error payload
(previously: ran a second copy of the query).
5) Same check on /cgi-bin/koha/opac/svc/report?id=N.
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
AllowItemsOnHoldCheckoutSCO was previously passed through to
CanBookBeIssued as the ignore_reserves flag, which skipped the entire
holds branch in C4::Circulation and silently allowed checkout of
items already waiting on the hold shelf (reserves.found = 'W') or in
transit/processing for another patron's hold.
With the pref now a 3-value Choice:
0 = don't allow checkout of any held items
1 = allow checkout of items with a pending hold only
2 = allow checkout of items with any hold state
sco-main.pl now always calls CanBookBeIssued with ignore_reserves=0
and filters the needsconfirmation keys according to the pref value,
mirroring the pattern SIP already uses. RESERVE_WAITING, TRANSFERRED
and PROCESSING are added to the error-matching list and to the SCO
template so patrons see a specific "on the hold shelf" / "in transit"
/ "being processed" message instead of falling through to the generic
"please see a member of the library staff" line.
Test plan:
- Enable WebBasedSelfCheck; log in to /cgi-bin/koha/sco/sco-main.pl.
- Create an item with a pending hold for another patron
(reserves.found IS NULL).
- With AllowItemsOnHoldCheckoutSCO = 0, scan the barcode: checkout is
refused with "This item is on hold for another patron".
- Switch to 1 ("Allow pending holds only"): checkout succeeds.
- Set the hold to waiting (reserves.found = 'W') and try again with
the pref still at 1: checkout is refused with "This item is waiting
on the hold shelf for another patron".
- Switch to 2 ("Allow pending and waiting holds"): checkout succeeds.
- Repeat with found = 'T' and 'P' at pref = 1 -> refused with the
appropriate transit/processing message; at pref = 2 -> allowed.
Signed-off-by: Kristi Krueger <kkrueger@cuyahogalibrary.org>
Signed-off-by: Andrew Fuerste Henry <andrew@bywatersolutions.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Extended attributes weren't being identified as changes and so need to be checked to see if any of them have changed
Sponsored-by: Westminster City Council <https://www.westminster.gov.uk/>
Signed-off-by: Martin Renvoize <martin.renvoize@openfifth.co.uk>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Andrew Fuerste Henry <andrew@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@openfifth.co.uk>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Christopher Brannon <cbrannon@cdalibrary.org>
Signed-off-by: Andrew Fuerste Henry <andrew@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@openfifth.co.uk>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Andrew Fuerste Henry <andrew@bywatersolutions.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Andrew Fuerste Henry <andrew@bywatersolutions.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Andrew Fuerste Henry <andrew@bywatersolutions.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
To test:
1. Turn on the OPACVirtualCard.
2. Log in to the OPAC as a patron and go look at your Library card ( opac-virtual-card.pl )
3. APPLY PATCH, updatedatabase, restart_all
4. Go again at your patron's card on the OPAC ( opac-virtual-card.pl ), it should look exactly the same.
5. Go to Tools > Notices > VIRTUALCARD
6. You should see the default content for the library card.
7. Play around with different variables from borrower, like [% borrower.firstname%] and branches, like [% branch.branchcode %]
8. You can also move around the barcode by using the placeholder value [% my_barcode %].
9. Put the [% my_barcode %] variable anywhere you want in the notice then go to the sys pref "OPACVirtualCardBarcode".
10. Change to different barcode types and relaod the library card page ( opac-virtual-card.pl ). You should notice the barcode type is being honored.
11. Turn on OPACpatronimages AND patronimages, then upload a patron image for your patron.
12. Use the [% my_image %] variable anywhere you want in the notice to place the patron image.
13. Leaving the [% my_image %] variable as is, turn off OPACpatronimages.
14. Reload the OPAC page, no image should display.
15. Delete the VIRTUALCARD notice.
16. Go back to the OPAC page and with the notice deleted you should see the hardcoded content. ie: the page should look exactly the same as it does without this patch.
Signed-off-by: Marie Martino <martinom43@morainevalley.edu>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Andrew Fuerste Henry <andrew@bywatersolutions.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This patch applies the new style preferences to the preview display and
email sending code.
Sponsored-by: Open Fifth <https://openfifth.co.uk>
Signed-off-by: Marion Durand <marion.durand@biblibre.com>
Signed-off-by: Thomas Klausner <domm@plix.at>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Roman Dolny <roman.dolny@jezuici.pl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Amended-by: Jonathan Druart
Tidy C4/Search.pm
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Under some circumstances (OPACShowHoldQueueDetails set, hold made,
OPAC user not logged in) a warning like:
[WARN] Use of uninitialized value $borrowernumber in numeric eq (==) at /kohadevbox/koha/opac/opac-detail.pl line 598.
is being generated.
Test plan:
==========
1. Set OPACShowHoldQueueDetails to 'Show holds and their priority
levels'.
2. From staff interface, place a hold on a record for any borrower.
3. Open a fresh browser (private mode or different browser), confirm
that you are not logged in, go to this record.
4. Check the content of plack-opac-error.log. You should see a
warning like:
[WARN] Use of uninitialized value $borrowernumber in numeric eq (==) at /kohadevbox/koha/opac/opac-detail.pl line 598
5. Apply the patch ; restart_all.
6. Repeat p. 3 & 4. There should be no new warning now.
Sponsored-by: Ignatianum University in Cracow
Signed-off-by: Roman Dolny <roman.dolny@jezuici.pl>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
The code in the controller is not longer used. We should also restore
the default value (120)
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This patch updates opac-news-rss.pl so that it outputs data with the
correct content type, text/xml.
To reproduce you must have at least one news item in your system. From
the OPAC main page, click the RSS feed link.
- If you are using Firefox or Chrome you will see unstyled plain test
on the screen.
You may or may not be able to see the problem if your
browser (e.g. Vivaldi) has a built-in RSS reader.
To test, apply the patch and restart services.
- In the OPAC, from the main page, click the RSS feed link at the bottom
of the OPAC news list.
- You should see the XML view of the feed. This confirms that the
browser is receiving the correct content type.
Sponsored-by: Athens County Public Libraries
Signed-off-by: Roman Dolny <roman.dolny@jezuici.pl>
Signed-off-by: Andrew Fuerste Henry <andrew@bywatersolutions.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This patch removes Baker & Taylor integration following the shutdown of
the company.
To test, apply the patch, run the database update, and restart all.
- In the staff interface go to Administration -> System preferences and
search for 'Baker.' There should be no results.
- If necessary enable at least one cover image service, e.g.
AmazonCoverImages, OpacCoce, GoogleJackets, etc.
- Log in to the OPAC and confirm that cover images display correctly on
these pages:
- Search results
- Bibliographic detail page
- Shelf browser
- Your summary -> Checked out
- Checkout history
- Recent comments
- Lists
Sponsored-by: Athens County Public Libraries
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@openfifth.co.uk>
This patch adds a new PatronAgeRestriction, which acts in the same way
PatronSelfRegistrationAgeRestriction (a restriction on the maximum age
of a borrower), except for the intranet. It will also act as the
maximum age restrictor on the OPAC, in the event that the
PatronSelfRegistrationAgeRestriction is not set.
To test:
== APPLY PATCH ==
a) updatedatabase
b) Set the PatronAgeRestriction syspref to 20, set the
PatronSelfRegistrationAgeRestriction to 30
c) On the OPAC, try to create or modify a patron whose age is 35 years
*) Note the error message presented, suggesting the age exceeds the
maximum
d) On the OPAC, try to create or modify a patron whose age is 25 years
*) Note the submission succeeds
e) On the staff client, try to create or modify a patron whose age is
25 years *) Note the error message presented, suggesting the age
exceeds the maximum
f) Set the PatronSelfRegistrationAgeRestriction to empty
g) On the OPAC, try to create or modify a patron whose age is 25 years
*) Note the error message presented, suggesting the age exceeds
the maximum
h) On the OPAC, try to create or modify a patron whose age is 19 years
*) Note the submission succeeds
i) Set the PatronAgeRestriction to empty
j) On the staff client, try to create or modify a patron whose age is
75 years
*) Note the submission succeeds
k) On the OPAC, try to create or modify a patron whose age is 75 years
*) Note the submission succeeds
== SIGN OFF ==
Sponsored-by: Cheshire West and Chester Council
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Martin Renvoize <martin.renvoize@openfifth.co.uk>
This follow-up patch addresses feedback from the QA process:
1. System preference naming consistency
Renamed the following preferences to remove "OPAC" prefix and align
with the FineNoRenewals naming convention:
- OPACFineNoRenewalsIncludeCredits → FineNoRenewalsIncludeCredits
- OPACFineNoRenewalsBlockAutoRenew → FineNoRenewalsBlockAutoRenew
2. Self-checkout backward compatibility
Added new system preference FineNoRenewalsBlockSelfCheckRenew to
control whether fine limits block renewals via web-based self-checkout.
Previously, OPACFineNoRenewals did not block self-checkout renewals.
With the rename to FineNoRenewals, this behavior changed. The new
preference defaults to "0" (don't block) to maintain backward
compatibility, allowing sites to opt-in to blocking self-checkout
renewals when patrons exceed the fine threshold.
Test plan:
1. Run prove t/db_dependent/Circulation.t - all tests should pass
2. Run prove t/db_dependent/api/v1/checkouts.t - all tests should pass
3. Verify system preferences are correctly renamed in the admin interface
4. Test self-checkout renewals with FineNoRenewalsBlockSelfCheckRenew
set to 0 (default) - renewals should work even when fines exceed limit
5. Test self-checkout renewals with FineNoRenewalsBlockSelfCheckRenew
set to 1 - renewals should be blocked when fines exceed limit
Sponsored-by: OpenFifth <https://openfifth.co.uk/>
Signed-off-by: Andrew Fuerste Henry <andrew@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@openfifth.co.uk>
Standardizes error code spelling across the codebase:
- Changes 'too_much_oweing' to 'too_much_owing'
- Changes 'auto_too_much_oweing' to 'auto_too_much_owing'
The word "owing" is the correct spelling in English.
Files updated:
- C4/Circulation.pm
- C4/SIP/Sip/MsgType.pm
- circ/renew.pl
- koha-tmpl/intranet-tmpl/prog/en/modules/circ/renew.tt
- koha-tmpl/intranet-tmpl/prog/js/checkouts.js
- koha-tmpl/opac-tmpl/bootstrap/en/modules/opac-reserve.tt
- koha-tmpl/opac-tmpl/bootstrap/en/modules/opac-user.tt
- misc/cronjobs/automatic_renewals.pl
- opac/opac-reserve.pl
- opac/opac-user.pl
- t/db_dependent/Circulation.t
All tests should pass successfully.
Sponsored-by: OpenFifth <https://openfifth.co.uk/>
Signed-off-by: Andrew Fuerste Henry <andrew@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@openfifth.co.uk>
Sponsored-by: OpenFifth <https://openfifth.co.uk/>
Signed-off-by: Andrew Fuerste Henry <andrew@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@openfifth.co.uk>
OPACFineNoRenewals no longer applies just to OPAC.
To avoid confusion rename it as FineNoRenewals and
also rename all occurences in code.
To test, confirm everything works as described in
previous test plans.
Also prove t/db_dependent/Circulation.t
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Shi Yao Wang <shi-yao.wang@inlibro.com>
Signed-off-by: Andrew Fuerste Henry <andrew@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
To test:
1. Make some fields for OPAC self registration required.
2. Create a new patron via self reg.
3. Fill out those required fields as an empty string like " ".
4. Submit the form, it succeeds.
5. APPLY PATCH, restart_all
6. Try again. Required fields with only whitespace are treated as if they were empty.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@openfifth.co.uk>
The warning
[WARN] Use of uninitialized value in concatenation (.) or string at
/kohadevbox/koha/opac/opac-search.pl line 600.
appears in plack-opac-error.log
Test plan:
==========
1. Observe plack-opac-error.log.
2. Go to Advanced search in OPAC.
3. Select any of item type ("Limit to any of the following:") in tab
"Item type" and perform search (do not enter any "Search for:" terms).
==> Warning appears in plack-opac-error.log.
4. Apply the patch; restart_all.
5. Repeat 2-3.
==> No warning in plack-opac-error.log.
Sponsored-by: Ignatianum University in Cracow
Signed-off-by: Janusz Kaczmarek <januszop@gmail.com>
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Martin Renvoize <martin.renvoize@openfifth.co.uk>
Now that the item loop only processes item fields from the filtered
$items resultset, several checks and patterns become unnecessary.
Changes:
- Remove dead checks: tag < 10 and tab != 10 guards
- Resolve $tagslib->{$item_tag} once instead of per-subfield
- Destructure ($code, $value) instead of indexed $subf[$i][0/1]
- Replace per-subfield grep over date kohafields with a hash lookup
- Remove redundant second $tagslib lookup for $kohafield
- Collapse repeatable if/else into a ternary
No functional changes.
Test plan:
1. Apply patch
2. Run the same test plan as the previous patch
=> SUCCESS: Behavior is identical
3. Sign off :-D
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Martin Renvoize <martin.renvoize@openfifth.co.uk>
Owen Leonard
Olivia Reynolds
Aleisha Amohia
Jonathan Druart
Lucas Gass
Nick Clemens
Martin Renvoize
Chris Mathevet
Hammat Wele
Tomás Cohen Arazi
David Cook
Andrew Fuerste Henry
Matt Blenkinsop
Martin Renvoize
Petro Vashchuk
Janusz Kaczmarek
Jake Deery
Emmi Takkinen
Roman Dolny