It seems that port numbers are stuck at 21. Editing them does not change the port number in the database.
Test Plan:
1) Check out Koha 25.05
2) Try to edit an EDI vendor account port
3) Note the change doesn't save
4) Apply this patch
5) Restart all the things!
6) Note you can edit the port again!
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Aleisha Amohia <aleisha@catalyst.net.nz>
Signed-off-by: Paul Derscheid <paul.derscheid@lmscloud.de>
(cherry picked from commit 03542dc217)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
The order of the columns in the yaml file must match the order of the
columns in the template file.
Test plan:
Confirm that, with bug 30633 applied, you can pick "shelving location"
as the default sort order and that the items are correctly sorted by
shelving location.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Laura_Escamilla <laura.escamilla@bywatersolutions.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
(cherry picked from commit 9f42c5fe28)
Signed-off-by: Paul Derscheid <paul.derscheid@lmscloud.de>
(cherry picked from commit 78ee3caa6f)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch adds column configuration to the table settings for the
"Available funds" table on the Acquisitions home page. If a table has
column configration, hidden columns should be hidden in the
configuration rather than in the in-page table options.
To test, apply the patch and restart all services.
- Go to the Acquisitions home page
- In the "All available funds" section, you should not see "active" and
"budget period" columns.
- NOTE: You may have to clear you browser's Local Storage in order for
the change to show.
- If you go to Administration -> Table settings -> Acquisition ->
acq_acqui-home you should see that the first two columns are hidden by
default and cannot be toggled.
Signed-off-by: Andrew Fuerste Henry <andrew@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 6df6337080)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Test plan:
Try to translate itemtype for an opac language not part of
intranet languages.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit c80e9c015c)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
The fourth parameter is now removed and was never used.
Also replacing the 'both' interface by passing no interface to make
it consistent with call in additional-contents.
Resolving warn for empty interface or theme on Languages.pm L128.
Test plan:
Run t/db_dependent/Languages.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 1f6e409871)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This change fixes the background jobs so that the list page loads
even when plugins are disabled.
Test plan:
0. Apply the patch
1. Download https://github.com/HKS3/koha-normalize-marc2db/releases/download/v0.91/Koha.Plugin.HKS3.NormalizeMARC2DB-0.91.kpz
2. Upload plugin into KTD
3. Click "Run tool" for plugin
4. Go to http://localhost:8081/cgi-bin/koha/admin/background_jobs.pl
5. Note that you see a pretty "Type"
6. Go to /etc/koha/sites/kohadev/koha-conf.xml and turn enable_plugins to 0
7. sudo koha-plack --restart kohadev
8. Go to http://localhost:8081/cgi-bin/koha/admin/background_jobs.pl
9. Note it now says "Unknown job type 'plugin_marc2db_normalizeall'
10. Celebrate as this is preferable to a 500 error
Signed-off-by: Aleisha Amohia <aleishaamohia@hotmail.com>
Signed-off-by: Emily Lamancusa <emily.lamancusa@montgomerycountymd.gov>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
(cherry picked from commit 6e3d0b1e48)
Signed-off-by: Paul Derscheid <paul.derscheid@lmscloud.de>
(cherry picked from commit eb862bd552)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Searching tag$subfield in the framework should redirect to the edition
of the tag with the subfield tab selected.
This has been broken when we used the wrapper for tabs on bug 33178.
Test plan:
Edit a framework
http://localhost:8081/cgi-bin/koha/admin/marctagstructure.pl?frameworkcode=
Search for 952$c
=> You are redirected to the edition of 952 and the "c" tab is selected
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit b1efa3d71d)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Test plan:
==========
1. In Administration > MARC bibliographic, from framework menu on the
right, prepare a csv file with framework export.
2. Try to import the fili into Default framework.
3. This should fail, with a redirect to a strange looking page, and
with lots of errors in the logs.
4. Apply the patch ; restart all.
5. Repeat p. 2. You should succeed and you should be able to see the
differences in the framework (if you exported from a different
framework).
Signed-off-by: Phil Ringnalda <phil@chetcolibrary.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 82707f469e)
Signed-off-by: Baptiste Wojtkowski <baptiste.wojtkowski@biblibre.com>
When creating or editing an EDI (EDIFACT vendor record) if the port is left empty it will be set to port 22. This is fine then the service is SFTP, but if FTP is selected the default to 21.
Test plan:
1) Enable EDIFACT
2) Create a new EDI Vendor account with the FTP transport selected. Pleave the ports unpopulated
3) Note the saved record has port 22 set
4) Apply this patch
5) Restart all the things!
6) Repeat stepts 1 and 2
7) The port should now be 21 for new ftp site and 22 for new stp sites!
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@openfifth.co.uk>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit fb9722a128)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
To test:
1. APPLY PATCH, restart_all
2. Make some holds for patrons in both the staff client and the OPAC. ( For OPAC turn on OpacHoldNotes )
3. Make sure you add some notes to each of these holds.
4. Go to the patron account and click on the 'Holds history' tab.
5. Make sure the hold note is there and looks correct.
6. Ensure you can hide the coluimn properly via Table settings.
Signed-off-by: Andrew Auld <andrew.auld@openfifth.co.uk>
Signed-off-by: Martin Renvoize <martin.renvoize@openfifth.co.uk>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
(cherry picked from commit 81859ce662)
Signed-off-by: Paul Derscheid <paul.derscheid@lmscloud.de>
(cherry picked from commit aed4eb5974)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Test plan:
1. Install a plugin that does not have any background_tasks, e.g. https://github.com/HKS3/HKS3GeoSearch/releases/tag/v0.12
2. Navigate to http://localhost:8081/cgi-bin/koha/admin/background_jobs.pl, observe a 500
3. Apply patch
4. Observe no 500
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
(cherry picked from commit 53630add0d)
Signed-off-by: Paul Derscheid <paul.derscheid@lmscloud.de>
(cherry picked from commit d5707a9ee6)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This slightly improves the current situation, where on background_jobs.pl
each plugin job would be displayed as "Unknown job type 'plugin_...'".
After this patch, we display the implementing package name
(sourced from plugins' background_tasks()), which is slightly more
human-friendly and significantly less error-looking.
Test plan:
1. In KTD, install a plugin implementing background jobs (e.g. the KitchenSink)
2. On http://localhost:8081/cgi-bin/koha/plugins/plugins-home.pl,
enable the plugin and run a tool/report from it
3. Observe ugly job types column on http://localhost:8081/cgi-bin/koha/admin/background_jobs.pl
4. Apply the patch
5. Observe the improved job types on http://localhost:8081/cgi-bin/koha/admin/background_jobs.pl
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@openfifth.co.uk>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit c2eb2625b2)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This is not the correct way to hide a column, we should use the DT's column
visibility plugin.
Test plan:
Have some checkouts for a patron, go to the checkout history page
Without this patch notice the "shift" => the table does not take the
whole available width.
Apply this patch, restart_all, remove localStorage entries
=> The table is now displayed properly
You can also play with on-site checkouts.
Before:
https://snipboard.io/uTWYit.jpghttps://snipboard.io/qxZE35.jpg
After:
https://snipboard.io/2L0F3Q.jpg
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 5a6f89f3f0)
Signed-off-by: Paul Derscheid <paul.derscheid@lmscloud.de>
Have written a patch to allow Publisher/Distributor number to be searched using the standard identifier search index.
Testing plan:
1. Start up KTD with Elasticsearch: ktd --es8 up
2. Apply the patch and restart everything (restart_all).
3. Reset the mappings: Administration > Catalog > Search engine configuration (Elasticsearch) > Reset mappings (at the bottom of the page)
4. Reindex: koha-elasticsearch --rebuild -d -b -a kohadev
5. Alternative to steps 3 and 4: reset_all
6. Update the visibility for 028a in the default framework so that it is visible in the Editor.
7. Add a new record using the default framework and put a term in 028a.
8. Using the advanced search "Standard number" Field, search for the term you put in step 7.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit ee69f07c29)
Signed-off-by: Paul Derscheid <paul.derscheid@lmscloud.de>
Most of the places where a "script_name" variable used it is not
strictly necessary. Because it is also used inconsistently, I think it's
better to simply remove the use of the variable where it isn't strictly
necessary.
This patch removes creation of the template variable from several
scripts and updates the corresponding template with the URL itself.
To test, apply the patch and restart services. Test the following pages,
including the various permutations where they are present, e.g. New,
Edit, Delete.
- Administration -> Cities and towns -> Search via the header search
form
- Administratoin -> Currencies and exchange rates -> Search via the
header search form
- Administration -> Desks
- Administration -> Budgets
- Administration -> Authority types
- Administration -> Authority types -> MARC structure -> Subfields
- Administration -> Classification configuration
- Administration -> MARC bibliographic framework
- Administration -> MARC bibliographic framework -> MARC structure ->
Subfields
- Administration -> Record matching rules
- Administration -> OAI repositories
- Administration -> Patron attribute types
- Administration -> System preferences -> Local use
- Administration -> Z39.50/SRU servers
- Acquisitions -> Vendor -> Contracts
- Acquisitions -> Vendor -> Basket -> Export as CSV
- Acquisitions -> Vendor -> Basket -> Edit basket
- Acquisitions -> Vendor -> Basket groups
- Tools -> Import patrons
- Tools -> Notices and slips
Sponsored-by: Athens County Public Libraries
Signed-off-by: Phil Ringnalda <phil@chetcolibrary.org>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 8a433d4f20)
Signed-off-by: Paul Derscheid <paul.derscheid@lmscloud.de>
On the holdings table of the bibliographic record detail page, we have a special
behaviour: we hide columns if there is no data to display. Indeed we have a lot
of column and we want to limit the number of columns displayed.
This behaviour conflicts with "Save state": when the columns are hidden the
state is modified. If you leave the page and come back, the column will stay
hidden, even if the global settings does not have it as hidden and even if the
user didn't explicitly hide it.
We want to implement something correctly to prevent a conflict with those 2
behaviours, but 24.11.00 is coming and we need a quick fix: here we are going to
remove save state for these 2 tables.
Test plan:
Apply this patch, restart_all
Go to the tables settings admin, jump to holdings_table
Notice that "Save configuration state on page change" is turned off by default
Go to catalogue/detail.plbiblionumber=13 (item does not have call number)
=> "Call number" column is not displayed
Edit the item, set a call number
Go to catalogue/detail.plbiblionumber=13 (item has call number)
=> "Call number" column is displayed
Go to the tables settings admin, jump to holdings_table
Turn on "Save configuration state on page change"
Go to catalogue/detail.plbiblionumber=1 (item does not have call number)
=> "Call number" column is not displayed
Edit the item, set a call number
Go to catalogue/detail.plbiblionumber=13 (item does not have call number)
=> "Call number" column is still not displayed
This can be considered a bug, that why we are disabling the feature for this
table.
Signed-off-by: Michaela Sieber <michaela.sieber@kit.edu>
Signed-off-by: PhilipOrr <philip.orr@lmscloud.de>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Make it use bKohaColumnsUseNames as we are building the columns
depending on sysprefs.
Note that the hard-coded list of columns to export is wrong
exportColumns: [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12],
Must use .noExport instead.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Paul Derscheid <paul.derscheid@lmscloud.de>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Removing the prefix holdings_ and otherholdings_
Could have been done at the code level but does not seem necessary to
have different column names
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Paul Derscheid <paul.derscheid@lmscloud.de>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
The system is vulnerable to Formula Injection attacks as the data
stored within the database and exported as CSV/Excel is not being
sanitized or validated against implanted formula payloads
This patch modifies all uses of Text::CSV and derived classes to pass
the "formula" parameter with value of "empty" which replaces formulas
by empty string.
Test Plan:
1) Apply this patch
2) For guided_reports.pl, attempt to export CSV where you've set a column to a formula somehow
( such as "=1+3" )
3) Export that CSV file
4) Note the formula has not been exported
5) Repeat this plan for the remaining scripts that export CSV files
where users can define the outputted data
Signed-off-by: Magnus Enger <magnus@libriotech.no>
Fixed two conflicts. I have tested that this works as advertised on:
- Reports (Download > Comma separated text (.csv)) [Text::CSV::Encoded]
- Circulation > Overdues > Download file of all overdues [Text::CSV_XS]
- misc/export_borrowers.pl [Text::CSV]
This covers all modules used, and both GUI and command line.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
[EDIT] Change none to empty in the commit message ! None is the default,
doing nothing. Empty clears the formulas.
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
1) Apply patch, reset_all
2) Configure holdings_table, visit:
<staff_url>/cgi-bin/koha/admin/columns_settings.pl?module=catalogue&page=detail&table=holdings_table
3) Confirm holdings_booksellerid is there and is hidden by default
4) Visit a record:
<staff_url>/cgi-bin/koha/catalogue/detail.pl?biblionumber=76
5) Edit one of the items and add a value to field 'e' Source of acquisition
5.5) You may need to click the 'show filters' link in order to have the 'Columns' table button show up
6) Go back to the record and click on the 'Columns' above the table
7) Click 'Source of acquisition'. Confirm it shows as expected
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Andrew Fuerste Henry <andrewfh@dubcolib.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Andrew Fuerste Henry <andrewfh@dubcolib.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
To test:
1. APPLY PATCH
2. Do an item search that will return results.
3. To the right of the table notice thee Columns, Export, Configure buttons
4. Use the Columns button to hide and show various columns, make sure it works right.
5. Use the Export button to try and export the table in various file formats. You should only see visible columns in your export.
6. Go to Admin -> Table settings, make sure you can hide columns properly from there.
Signed-off-by: Sam Lau <samalau@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Some libraries ask for the ability to scan/browse the call numbers index.
Test plan:
==========
1. Have an installation with items with callnumbers (in ktd with standard
test data set: add some callnumbers to the items).
2. Go to Advanced search > More options; choose Call number in the first
drop list and mark Scan indexes. Enter one of the call numbers you
assigned to the items and perform the search. You should get no
results.
3. Apply the pach; restart all; when using ES:
koha-elasticsearch --rebuild -r -d kohadev
4. Repeat p. 2. You should get a list with at least one call number.
The link should lead you to the record(s) with items with the selected
call number.
This should work for ES and for Zebra, but for Zebra you would need to
replace /etc/koha/zebradb/ccl.properties with the repository version; and
you will get one token results on the list, like for other indexes.
Signed-off-by: Roman Dolny <roman.dolny@jezuici.pl>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Laura_Escamilla <laura.escamilla@bywatersolutions.com>
Signed-off-by: Olivier V <olivier.vezina@inLibro.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch attempts to force a password change for new staff created patrons.
This is done by setting the password_expiration_date to an expired date when
adding a new patron. This patch adds a new system preference
'ForcePasswordResetWhenSetByStaff' and a new column to the categories table
'force_password_reset_when_set_by_staff.
To test:
1) Apply patch, restart_all, updatedatabase, and also be sure to update schema.
2) Visit Administration->Sytem Preferences and search for 'EnableExpiredPasswordReset'.
Make sure this is set to enable. Now search for 'ForcePasswordResetWhenSetByStaff'.
This should be defaulted to 'Don't force'.
3) Keep that tab open and visit Administration->Patron categories. Click on edit
on the Board category. Noitce that there is a now a 'Force new patron password reset'
section. Notice that the by default, this is set to follow the
ForcePasswordResetWhenSetByStaff system preference (currently set to don't force).
Click on the dropdown and change it to 'Force'. Save changes
4) Click on the Patrons tab to visit members-home.pl and then click 'New Patron'.
Select on Patron. Fill in the required information and also enter a password.
5) Submit this form and notice that the patron's password expiration date is set
to never. This should be the case because the default for 'Force new patron
password reset' follows the sys. pref. which is still set to 'Don't force' (You
could have some expiry date in this step, but it should at least be set to a
date that is not expired. this depends on whether or not you have a defalut
password expiration date set in patron categories )
6) Log into the OPAC with this patron and notice it works as expected and log in
was successful.
7) Go back to the patron home page and click to add a new patron. This time select
'Board'. Once again fill out the required info, enter a password, and then save
the form.
8) Notice that for this patron, the password expiration date is set for today's
date. This is because we changed the setting for the 'Board' patron category to
force.
9) Log into the OPAC with this patron. You should be redirected to a page with an
error that says: "It's your first login! You need to reset your password." Click
on the reset password link below this message.
10) You should be sent to a page where you can reset your password. Fill in the
form and click 'Update password'. Attempt to sign into the OPAC with this new
password. Everything works as expected.
11) Go back to the staff interface and view this patron's detail page. Notice the
password expiration date is now set to what the default is in the patron
category.
12) Edit this patrons information and set their password expiration date to
yesterday. Go back to the OPAC and try to sign in with this patron again. Note
that this time, you are also redirected but the message says "Error: Your
password has expired!"
13) Go back to the staff interface and visit the sys. pref tab we left open. Set
it to the 'Force' option and save changes.
14) Visit the patron home page and click add patron, now select the patron
category again. Fill in required info and enter password. Submit form and note
that the patron's password expiration date is set to today. Try to login to
the OPAC with this patron, you should be redirected to the page with the error
that says "Error: It's your first login! You need to reset your password."
15) Sign-off :)
Signed-off-by: Laura_Escamilla <laura.escamilla@bywatersolutions.com>
Signed-off-by: Olivier V <olivier.vezina@inLibro.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
To test:
1. Apply patch, restart_all
2. Add some holds and run the holds queue builder.
3. Go to the holds queue.
4. You should see less information in the 'Title' field.
5. You should see an 'Author' column, make sure it is sortable and the data is correct.
6. You should see a 'Publication details' column, that should also be sortable. Make sure the data is correct.
7. Each column, and all other in the holds queue table, should be column configurable via Table Settings.
8. Make sure you hide/show columns via Table settings.
9. Make sure the data can be exported correctly via tha Export button.
Signed-off-by: Brendan Lawlor <blawlor@clamsnet.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
It is customary in non-English-speaking European countries to write the
currency symbol after the amount and separated from it by a space (e.g.
123 €, 54 zł, 38 Kč). This custom should be taken into account
in Koha::Number::Price::_format_params (by proper use the p_cs_precedes
parameter).
The correct display of the currency is particularly important when using
OPACShowSavings system preference.
Test plan:
==========
1. Enable OPACShowSavings, have some items with defined 'v - Cost,
replacement price'. Check out the items to a patron.
2. Log in to OPAC as the patron. See the amount of 'total savings' on
the main page. Note that the currency symbol precedes the amount.
There is no way to configure the position of the currency symbol.
3. Apply the patch ; updatedatabase.pl ; restart_all.
4. Go to Administration > Currencies and exchange rates. Modify the
active currency unchecking the 'Currency symbol precedes value'
checkbox.
5. Refresh the OPAC page. See that the position of the currency symbol
has been changed.
Sponsored-by: Ignatianum University in Cracow
Signed-off-by: Roman Dolny <roman.dolny@jezuici.pl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Pedro Amorim <pedro.amorim@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
We want to make distinguish the search terms and the
configuration/option of the table (number of entries, column visibility,
etc.)
Signed-off-by: Pedro Amorim <pedro.amorim@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Pedro Amorim <pedro.amorim@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Amended-by: Jonathan Druart
Drop changes to admin/columns_settings.yml to avoid conflict. Just
assume that 1 is the default (see next patch)
Add +x to atomicupdate
Signed-off-by: Pedro Amorim <pedro.amorim@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Add unit tests for authorities and deletion
Fix dbrev and kohastructure discrepancies
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: David Cook <dcook@prosentient.com.au>
Sponsored-by: Association KohaLa - https://koha-fr.org/
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Rename Oaipmh to OAI
Rename oaiservers to oai_servers
Rename OaiServer to OAIServer
Rename oai_servers.id to oai_servers.oai_server_id
Rename ServerSearch to server_search
Use a callback function for logs
Use context for string "Set"
Split translation string
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: David Cook <dcook@prosentient.com.au>
Sponsored-by: Association KohaLa - https://koha-fr.org/
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Pedro Amorim <pedro.amorim@ptfs-europe.com>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: David Cook <dcook@prosentient.com.au>
Sponsored-by: Association KohaLa - https://koha-fr.org/
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Test plan:
- Run updatedatabase.pl
- Apply the DBIC update patch
- Setup an OAI repository in Administration -> OAI repositories (admin/oaiservers.pl)
If the repository dataformat is in oai_dc, you can use the sample XSLT files:
For Unimarc:
OAIDCtoUNIMARCXML.xsl for bibliographic records
AuthOAIDCtoUNIMARCXML.xsl for authorities
For Marc21:
OAIDCtoMARC21XML.xsl for bibliographic records
AuthOAIDCtoMARC21XML.xsl for authorities
If the repository dataformat is in marc-xml, you can use
OAIMarcxml2KohaMarcxml.xsl for both Unimarc and Marc21.
- Some repositories to test with:
Bibliographic records, oai_dc:
Endpoint: http://staroai.theses.fr/OAIHandler
Set: ddc:260
XSLT: <path_to_src>/koha-tmpl/intranet-tmpl/prog/en/xslt/OAIDCtoUNIMARCXML.xsl
or
XSLT: <path_to_src>/koha-tmpl/intranet-tmpl/prog/en/xslt/OAIDCtoMARC21XML.xsl
Authorities, oai_dc:
Endpoint: https://www.idref.fr/OAI/oai.jsp
Set: a
XSLT: <path_to_src>/koha-tmpl/intranet-tmpl/prog/en/xslt/AuthOAIDCtoUNIMARCXML.xsl
or
XSLT: <path_to_src>/koha-tmpl/intranet-tmpl/prog/en/xslt/AuthOAIDCtoMARC21XML.xsl
Authorities, marc-xml, Unimarc:
Endpoint: https://www.idref.fr/OAI/oai.jsp
Set: a
XSLT: <path_to_src>/koha-tmpl/intranet-tmpl/prog/en/xslt/OAIMarcxml2KohaMarcxml.xsl
- Note: marc-xml harvesting will not work with HTTP::OAI::Harvester version 3.xx
Version 4.xx is needed.
See Bug 17704 for updating Koha default version to 4.xx
- If you want to receive a report email, fill the OAI-PMH:HarvestEmailReport
syspref. The model used (OAI_HARVEST_REPORT) can be edited in tools -> Notices and slips.
- start a harvest with the following command:
misc/cronjobs/harvest_oai.pl
This script starts an OAI Harvest
This script has the following parameters :
-h --help: this message
-v --verbose (enable output to stdout)
-r --repository: id of the OAI repository
-d --days: number of days to harvest from (optional)
-l --list: list the OAI repositories
-f --force: force harvesting (ignore records datestamps) (optional)
Example: misc/cronjobs/harvest_oai.pl -r 1 -d 10 -v -f
- Check the logs in the Log Viewer (tools/viewlog.pl)
(CronjobLog syspref must be activated)
Sponsored-by: KohaLa
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Pedro Amorim <pedro.amorim@ptfs-europe.com>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: David Cook <dcook@prosentient.com.au>
Sponsored-by: Association KohaLa - https://koha-fr.org/
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Actually new "booking" feature can be set on an item but no directly on
an itemtype. This patch adds this possibility.
Test plan:
1) Test this new feature on an item as it were currently working.
2) Apply this patch
3) Run updatedatabase.pl
4) Reload Schema by running update_dbix_class_files.pl
5) Change new syspref 'item-level_booking' to 'itemtype'
6) Edit an itemtype, there is a new checkbox to add 'bookable' option
7) Test it with item with this itemtype, if there is 1 item at least you
will see 'Booking' tab.
8) You can change syspref to 'item' to see the current behavior
Note: When item-level_booking is set on 'itemtype' you can change
dropdown option to 'No' on item bookable option.
Sponsored by: Association de Gestion des Œuvres Sociales d'Inria (AGOS)
Signed-off-by: Esther <esther@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Paul Derscheid <paul.derscheid@lmscloud.de>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Test plan:
1. Start up KTD with Elasticsearch: ktd --es8 up
2. Apply this patch and restart all services (restart_all)
3. Reset the mappings: Administration > Catalog > Search engine configuration (Elasticsearch) > Reset mappings (at the bottom of the page)
4. Reindex: koha-elasticsearch --rebuild -d -b -a kohadev
5. Alternative to steps 3 and 4: reset_all
6. Add a new record using the default framework and put a term in 310$a, such as 'Annual'.
Sponsored-by: Education Services Australia SCIS
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Patch https://github.com/Koha-Community/Koha/commit/6cbbfa2 changed
holdings_barcode to holdings_barcodes
I believe this caused the configuration from the table to no longer
work (barcodes!=barcode)
Test plan:
1) Access any bibllio:
<staff_url>/cgi-bin/koha/catalogue/detail.pl?biblionumber=76
2) On the top right of the table, click 'Configure'
3) Expand 'Catalog', search for 'holdings_barcode'. Tick 'is hidden by
default'. Save.
4) Visit the biblio again, notice the column is still showing.
5) Apply patch. Restart all + flush_memcached. Repeat.
6) Bonus: On the table, click 'Show filters'. Make sure barcode
filtering still works.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
The form cannot longer be saved, and no appear appear (nothing in log,
nothing on the UI)
This is coming from bug 37955 where we modify the table_id to fix
anchors, but we didn't care of the rest of the code using this TT
variable.
This patch suggests to replace # and _ with |
Test plan:
Confirm that the form can be edited, saved, and that it is taken
correctly into account.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch limits indexing of field 246 to $a, $b, $n, and $p in
various title indexes.
Previously, all 246 subfields were indexed, including non-title
subfields such as $i (Display text), $g (Miscellaneous information),
and linking subfields, making the title index very large and giving
false results.
To test:
1. Add all the 246 subfields to the default bibliographic framework
1.1. Go to Administration > MARC bibliographic framework
1.2. Click Actions > MARC structure next to the Default framework
1.3. Search for 246
1.4. Click Actions > Edit subfields
1.5. For each subfield, make sure Editor is checked
1.6. Click Save changes
2. Create a new record and fill out all the 246 subfields
2.1. Go to Cataloging
2.2. Click New record
2.3. Fill out the mandatory fields (000, 003, 005, 008, 040$c,
245$a, 942$c)
2.4. Fill out all the subfields in 246 (I simply write the name of
the subfield in the text field e.g. Display text in 246$i)
2.5. Click Save
2.6. Click Normal to access the detailed record
3. View the Elastic search record
--> All the subfields (including "Display text", "Miscellaneous
information" and other non-title subfields) should be indexed in
- title
- title__suggestion
- title-abbreviated
- title-abbreviated__sort
- title expanded
- title-expanded__sort
- title-former
- title-former__sort
4. Make a title or keyword search for "Display" (or whatever you wrote
in 246$i)
--> Your record should be in the results
5. Apply patch
6. Rebuild the index using -r
koha-elasticsearch --rebuild -d -r -v kohadev
7. Redo step 3
--> Only 246 $a, $b, $n, and $p should be indexed
8. Redo step 4
--> Your record should NOT be in the results
Signed-off-by: Phil Ringnalda <phil@chetcolibrary.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
In aqplan.pl there are two different sets of params for things you can plan
by: for the toolbar "Planning" menubutton the script looks up what AVs are
used for "Statistic 1|2 done on" for the budget's fund(s), and passes them to
the template which knows to hardcode the MONTHS, ITEMTYPES, and BRANCHES
choices, but for "Select planning type" in the Filter sidebar box, the
script inserts the harcoded ones itself, adds in the ones used by a fund,
and for no apparent reason adds in every authorized value category that starts
with the letter A and has at least one value. Those things do not actually
work, because for things other than the hardcoded ones the script checks
whether they are in a fund's "Statistic 1|2" and if not refuses to let you
plan by them.
Test plan:
1. Administration - Budgets
2. If you don't have a budget, create one and add a fund to it,
but with the default data click the name Main budget
3. In the row for Main fund, click Actions->Edit
4. For Statistic 1 done on choose an authorized value which does not start
with A, like BOR_NOTES, and Save
5. In the top toolbar, Planning->Plan by months
6. In the sidebar Filter box, note that there is an option to plan by
AR_CANCELLATION even though you didn't select that for Statistic 1
7. Select the by BOR_NOTE choice and Submit
8. Note that you now only see Main fund, because that's the only one
which uses that AV
9. Select the by months choice and Submit, see that it changes back, then
select the by AR_CANCELLATION choice and see that nothing is displayed,
select the by months choice again and Submit, see that the display is
now completely broken
9. Apply patch, restart_all, reload the page
10. Note that the AR_CANCELLATION choice is gone, and all the choices
you do have work correctly
Sponsored-by: Chetco Community Public Library
Signed-off-by: Caroline Cyr La Rose <caroline.cyr-la-rose@inlibro.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
The new API driven items view defaults to 20 per page. This is a bit low, it would be great if it could be configurable to a higher value per the table configuration.
Test plan:
1. Apply this patch
2. restart_all (memcached restart is required)
3. Go to Administration > Table settings
4. Catalogue > holdings_table | otherholdings_table
=> Notice the new "Default display length"
5. Select something else than 20
6. Go to the detail page of a record with lot of records
=> Notice that the default value defined in the settings is used.
Signed-off-by: Emily Lamancusa <emily.lamancusa@montgomerycountymd.gov>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch adds the option of displaying patron "sort1" and
"sort2" statistical fields in the patron module's main search
results. The fields are hidden by default in the updated table
configuration.
To test, apply the patch and restart services.
- Go to Patrons and perform a search.
- You should not see columns for sort1 and sort2.
- Under the "Columns" button you should see options to display sort1 and
sort2. Confirm that they work to show and hide the columns.
- Confirm that the sort1 and sort2 columns are sortable and searchable.
- Go to Administration -> Table settings.
- Under Patrons -> member, toggle the sort1 and sort1 "hidden by
default" checkboxes and save the configuration.
- Return to patron search results to confirm that the columns are now
shown by default.
Signed-off-by: Émily-Rose Francoeur <emily-rose.francoeur@inLibro.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
The vendor contract management page has a few sections of code that are
meant to display a minimal confirmation message ("Data recorded") after
saving a new or edited vendor contract.
However, aqcontract.pl redirects back to the vendor details page after
saving, so this code is never reached and should be removed.
Test plan:
1. Apply patch
2. Go to the Acquisitions module and find a vendor
3. Click + New > Contract
4. Fill in the information and click Save
5. Click the "Contracts" link in the navigation menu on the left
--> Confirm that the contract was saved correctly
6. Click the Edit button and make changes to all fields
7. Save the information and click "Contracts" again
--> Confirm that the new information saved correctly
Signed-off-by: Phil Ringnalda <phil@chetcolibrary.org>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Kyle M Hall
Jonathan Druart
Owen Leonard
Marcel de Rooy
David Cook
Janusz Kaczmarek
Lucas Gass
Tadeusz „tadzik” Sośnierz
danyonsewell
Pedro Amorim
Matt Blenkinsop
Sam Lau
Martin Renvoize
Matthias Meusburger
Paul Derscheid
Thibaud Guillot
Alex Buckley
Caroline Cyr La Rose
Phil Ringnalda
Emily Lamancusa
