To test:
* Turn on patronimages system preferences
* Go to any patron account
* Hover over the 'dummy image' for the Add button
* Browse and select an image for upload
* Saving results in the following error:
The form submission failed (Wrong CSRF token). Try to come back, refresh the page, then try again.
Apply patch and try again. You shouldn't need to try twice, it should work on the first attempt now.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
(cherry picked from commit f0e6f25428)
Signed-off-by: Jacob O'Mara <jacob.omara@ptfs-europe.com>
(cherry picked from commit 11d88ba12f)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
(cherry picked from commit 715afc2826)
Signed-off-by: Arthur Suzuki <arthur.suzuki@biblibre.com>
With UseCashRegisters syspref disabled going to the page
/cgi-bin/koha/circ/set-library.pl in staff interface and setting a
library gives the following errors in plack-intranet-error.log:
Use of uninitialized value $register_id in string ne at /kohadevbox/koha/circ/set-library.pl line 79.
Use of uninitialized value $referer in pattern match (m//) at /kohadevbox/koha/circ/set-library.pl line 114.
In the if clause $userenv_register_id appears to be typoed, it should have
been $register_id as $userenv_register_id is always defined. As for the
$referer variable, it is undef if there is no referer so let's just initialize
it to an empty string for the regex so it doesn't give the warning.
To test:
1) Go directly to /cgi-bin/koha/circ/set-library.pl by typing it in
the URL bar and set a library
2) Make sure plack-intranet-error.log doesn't contain the above mentioned errors
after applying this patch
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 8e25fa1dc5)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
(cherry picked from commit 513b1160bc)
Signed-off-by: Arthur Suzuki <arthur.suzuki@biblibre.com>
When different patrons have item level holds on the same item, Holds to
pull shows wrong first patron.
Test plan:
1) Place a record-level hold on a biblio with an available item
2) Check the Holds to pull page (circ/pendingreserves.pl)
--> The biblio should appear in the list and the patron should appear in the 'First patron' column
3) Place a second record-level hold on the same biblio
4) Go back to the Holds to pull page
--> The biblio is still there, but the patron in the 'First patron' column is the second patron
5) Place a third record-level hold on the same biblio
6) Go back to the Holds to pull page
--> The biblio is still there, but the patron in the 'First patron' column is the third patron
7) Apply the patch
8) Go back to the Holds to pull page
--> The biblio is still there and the patron in the 'First patron' column is the first patron
Signed-off-by: Sally <sally.healey@cheshiresharedservices.gov.uk>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 87b985528e)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
(cherry picked from commit c1cc0c0737)
Signed-off-by: Arthur Suzuki <arthur.suzuki@biblibre.com>
TO test:
1 - Find a bib with a single item
2 - Browse to Circulation->Transfer
3 - Transfer the item to another branch
4 - Check the item in at current branch and cancel the transfer on the dialog
5 - Place a hold on the biblio for a patron at current branch
6 - Browse to Circulation->Holds to pull
7 - Item does not show
8 - Apply patch, restart all
9 - Browse to Circulation->Holds to pull
10 - Item shows
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 206ba015c4)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
(cherry picked from commit 3f7363f6ca)
Signed-off-by: Arthur Suzuki <arthur.suzuki@biblibre.com>
Holds to Pull ( pendingreserves.pl ) ignores holds if priority 1 hold is suspended,
and shows the wrong number of "patrons with holds" which presumably tells the
librarian how many copies to pull from the shelves.
Test Plan:
1) Create a record with one or more holdable items
2) Place two holds on the record
3) Note they show in the holds to pull report
4) Suspend the priority 2 hold
5) Note the report continues showing that 2 patrons have holds
6) Resume the priority 2 hold
7) Suspend the priority 1 hold
8) Note the hold disappears from the holds to pull report
9) Apply this patch
10) Restart all the things!
11) Reload the holds to pull report
12) The report should show one hold that needs an item pulled to fill it!
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Caroline Cyr La Rose <caroline.cyr-la-rose@inlibro.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit e536229292)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
(cherry picked from commit 6a49c8a1b0)
Signed-off-by: Arthur Suzuki <arthur.suzuki@biblibre.com>
RevertWaitingStatus has already removed the itemnumber from the hold, passing $itemnumber (from scanned item) should work, as it will reattach the hold to the item
Test plan:
1 - Enable HoldsAutoFill
2 - Place a title level hold
3 - Check in an item and confirm hold
4 - Switch to another branch
5 - Checkin the item
Without this patch you got
Can't call method "biblionumber" on an undefined value at /kohadevbox/koha/C4/Reserves.pm line 1577.
at /kohadevbox/koha/C4/Reserves.pm line 1576
With this patch applied the operation succeeds
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Having IndependentBranches on, a librarian who is not superlibrarian
does not get a autocomplete hint list when entering a part of the
patron's name (while performing check out, etc.) Koha registers
an error:
DBIx::Class::Storage::DBI::_dbh_execute(): DBI Exception: DBD::mysql::st
execute failed: Column 'branchcode' in where clause is ambiguous at
.../Koha/Objects.pm line 312
This is due to fix to the bug 10902 -- addig "prefetch => 'branchcode'" to
the attributes of the query in circ/ysearch.pl, while having branchcode
in the search parameters.
Test plan:
----------
1. Have IndependentBranches on, PatronAutoComplete set to 'Try.
Be a librarian without superlibrarian privileges. Have some
patrons defined.
2. In the main input field on the top, with Check out active, try to
put 3+ characters from the known user name/cardnumber etc. You
will get no hint.
3. Apply the patch.
4. Repeat 2. You should now see an autocomplete hint list.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
There are several occurrences of `my $var += ` or .= in the code.
It should not cause problems but it's confusing.
Test plan:
Read the patch and confirm that the changes make sense.
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
In circ/overdue.pl, the Title column is the result of includes/biblio-title.inc display. The code of biblio-title.inc means to display subtitle, part_number and part_name from biblio table, but nothing but commas show up because those fields are never retrieved by overdue.pl
To reproduce:
1) have an item whose biblio.subtitle, part_name and part_number and non-empty.
2) issue it, then set it late (overdue).
3) go to the report page (circ/overdue.pl) and make it appear.
4) subtitle, part_number and part_name do not appear, although they are meant to by biblio-title.inc code
5) apply the patch and try again.
It's a simple fix of adding the fields in the database query.
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This makes two changes:
1 - We no longer call get_items_that_can_fill if there are no holds
2 - The subroutine will return an empty Koha::Items object if there are no holds passed
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch tackles a very specific scenario. Calling split(...,
CGI::param) makes it be called in list context. The split docs say:
split /PATTERN/,EXPR,LIMIT
this means the first CGI param will be used as EXPR and the second one
as LIMIT, which is wrong anyway. So the fix is to just force scalar
context.
To test:
1. Not sure, just make sure nothing breaks when using the scripts in the
browser.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Filter "Date due to" is now taken into account even when filled with a
future date for the displayed result and downloaded results.
Filter "Show any items currently checked out" is now taken into account
for the downloaded results.
To test:
1- Go to Circulation then to overdues
2a- Add a filter with "Date due To" > today
2b- Check that only the results with "Due date" < today are displayed
(not those with "Due date" between today and the date requested)
2c- Click on "Download file of displayed overdues"
2d- Check that the file contains only the results with "Due date" <
today (not those with "Due date" between today and the date requested)
3a- Reset filter and then add the filter "Show any items currently
checked out"
3b- Check that all the results are displayed (even those with "Due date"
> today)
3c- Click on "Download file of displayed overdues"
3d- Check that the file contains only the results with "Due date" <
today (not those with "Due date" between today and the date requested)
9- Apply the patch
10- Repeat step 1 to 8, checking that all the results corresponding to
the selected filter are now displayed/downloaded
https://bugs.koha-community.org/show_bug.cgi?id=26269
Signed-off-by: Theodoros Theodoropoulos <theod@lib.auth.gr>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
The current handling of onsite checkouts with OnSiteCheckoutsForce
syspref enabled is confusing and hard to understand. It's also fragile
with a high risk future changes could result in subtle bugs.
Also fix an inconsistency in which errors (DEBT_GUARANTORS) are considered blocking for
forced onsite checkouts.
To test:
1) Enable OnSiteCheckouts, disable OnSiteCheckoutsForce
2) Edit a biblio item and for example set Not for loan to a value
restricting loans
3) Try to check out the item for some patron
4) A message that item is not for loan should be displayed
5) Select "On-site checkout" and try again
6) The same message should be displayed
7) Try to checkout with some invalid barcode
8) A message that barcode was not found should be displayed
9) Now enable OnSiteCheckoutsForce
10) Try to checkout the item for some patron
11) A message that item is not for loan should be displayed
12) Select "On-site checkout" and try again
13) Checkout should now succeed, no messages should be displayed
14) Try to checkout with some invalid barcode
15) A message that barcode was not found should be displayed
16) All of the above steps should produce the same result with and without this patch
Additional:
Before patch:
a) Set NoIssuesChargeGuarantorsWithGuarantees to 1
b) add a guarantee with another guarantor
c) charge a 1.01 fine to other guarantor
d) checkout is blocked due to fines
Apply patch
e) checkout is allowed when onsite checkouts forced
Sponsored-by: Gothenburg University Library
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
If I access circulation.pl directly, with no patron cardnumber or borrowernumber submitted, I get an error:
Can't call method "messages" on an undefined value at /kohadevbox/koha/circ/circulation.pl line 525
This is caused by Bug 29230 which calls $patron outside a
"if ($aptron)".
Test plan :
1) In staff interface, click in 'check out' search box
2) Hit enter (without a search text)
=> Without patch you get an error
=> With patch you see a blank page /cgi-bin/koha/circ/circulation.pl
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Add methods to return the messages attached to a patron.
It will add the capability to access them from notice templates.
Test plan:
Define some messages for a given patron
Go to the circulation page of the patron and confirm that they are still
displayed
Test the notice templates:
Add to HOLD_SLIP the following content
"""
[% SET messages = borrower.messages %]
[% IF messages.count %]
Messages:
<ul>
[% FOR m IN messages.search( message_type => 'L' ) %]
<li>[% m.message %]</li>
[% END %]
</ul>
[% END %]
"""
To display all the messages from staff ('L')
Adapt following your needs.
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Stina Hallin <stina.hallin@ub.lu.se>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
If a patron's attributes is limited to some libraries, we must apply
this limit on the overdue list view.
Test plan:
1. Create the following patron attributes:
A that is not searchable
B is searchable and does not have library limitation
C is searchable and is limited to another library than yours
2. On the right part of the overdue list view you must see B only
Without this patch C is displayed as well.
Signed-off-by: The Minh Luong <the-minh.luong@inlibro.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch adjusts get_items_that_can_fill to make two requests:
first the list of items for item-level holds
second the list of biblionumbers for title-level holds
This stops the report from pulling more items for item-level hold
This patch also removes the aliases used in the code - while readability
is a bit harder, it allows for using 'me' in get_items_that_can_fill
Otherwise, this routine would need a parameter to know what we called the table.
To test:
1 - Find a record with many items available
2 - Place an item level hold for an item on the record, not the one with lowest itemnumber
3 - Run 'Hold to pull' report
4 - Note the barcode does not match
5 - Apply patch
6 - Reload report
7 - It matches!
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
The "Delete" link is hidden but the controller does not do the necessary checks.
/cgi-bin/koha/circ/del_message.pl?message_id=1&borrowernumber=5&from=moremember
Test plan:
Create a message, see the "Delete" link, don't click it but copy it
Change logged in library and use the link
If AllowAllMessageDeletion is off you should be redirected to 403
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 26352 changed the line in circ/circulation.pl that searches for a
patron card number in the barcode field from using the $barcode variable
to the $findborrower variable. This breaks AutoSwitchPatron.
Test plan:
1. make sure AutoSwitchPatron system preference is on.
2. get two patron card numbers.
3. enter the first card number to check out to the patron.
4. enter the second card number in the item barcode field.
5. observe that the barcode is not found.
6. apply patch
7. enter the second card number in the item barcode field again.
8. observe that the second patron is loaded to check out to.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
To test:
1) go to the main page of Koha and search in the "Check out" search window type "näyttö".
2) see that umlauts got replaced with replacement characters.
3) apply the patch.
4) repeat 1-2, ensure that umlauts displayed correctly and are not getting replaced with replacement characters.
JK: remove period from commit title
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch makes the code for itemtypeslimit work, and adds options for shelving location and collection code
This also remove the 'post' method from the form to allow easy bookmarking
To test:
1 - Add holds to your system
2 - Run the holds queue builder
3 - Browse to Circulation->Holds queue
4 - Note the library dropdown
5 - Apply patch
6 - Reload and note new options
7 - Test that both limits and 'All' options work as expected
8 - Note that description at top includes options when selected
"### items found for All libraries and item type:(Books)"
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch replaces the "Holding library" column in the returns table
with a 'Transfer to' column that displays the destination for the item
awaiting transfer if a transfer exists.
Signed-off-by: Ben Daeuber <bdaeuber@fargolibrary.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The commit "Bug 29290: Rename relationships borrower =>
patron" (d46492ac23) renamed the relation for the borrowers table from
'borrower' to 'patron' but the joins were not updated accordingly so a
few scripts got broken.
To test:
1) Notice that
$ perl misc/cronjobs/automatic_renewals.pl -c -s -v
returns 255 error code on exit
2) Apply patch
3) Notice the automatic_renewals.pl works now and exit code is 0
4) Make sure /cgi-bin/koha/tools/batch_extend_due_dates.pl works.
5) Try to grep for 'borrower' in Koha source code and see if there
are any other join done using the Koha::Checkout or
Koha::Old::Checkout objects.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Bug 29380: (follow-up) Fix renewal feature in staff interface
The commit "Bug 29290: Rename relationships borrower =>
patron" (d46492ac23) renamed the relation for the borrowers table from
'borrower' to 'patron' but the usage in the renew.pl script was not
updated.
To test:
1) Try to renew a book in intranet through the renewal tab
2) Notice it gives error
3) Apply patch
4) Notice the error is now gone
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This is based on Julian's idea on bug 28026 where we could get rid of call_recursive by passing refs as arguments to call.
Test Plan:
1) Apply this patch
2) prove t/db_dependent/Koha/Plugins/Plugins.t
3) prove t/db_dependent/Koha/Plugins/Barcode_transform_hooks.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The previous patch makes check_cookie_auth return the session instead of
$sessionID, so we are adjusting the different calls to prevent
confusion.
However they are mainly used to check the authentication status and
don't care about this second variable.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This bug allows for batch printing of multiple article requests slips
To test:
1. apply this patch
2. restart_all
3. enable ArticleRequests preference
4. create multiple article requests
5. go to circ/article-requests.pl in staff interface
6. print a single slip from a row
CHECK => it works as expected
7. select all rows and print slip from general actions menu (above the table)
SUCCESS => all article requests slips are printed
8. select multiple rows (not all) and print slip from general actions menu (above the table)
SUCCESS => only selected article requests slips are printed
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
JD amended patch: Perltidy!
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Show the TOC checkbox on OPAC and staff.
Test plan:
Add new article request on OPAC or staff. Tick checkbox.
Verify if TOC is Yes on opac-user or staff patron details.
Check the list view on circ/article-requests.pl.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The 'Checkout' search hijacks some of the DataTables searching code used for 'Search patrons'
Rather than try to implement the search again on another page, we can simply send the user
to the patron search if the cardnumber is not found
Additionally, this patch adds a 'Check out' button to the patron search results to allow
going to checkotus directly
To test:
1 - Apply patch
2 - Perform a 'Checkout' search from the header
3 - Note that:
For a cardnumber, you are redirected directly to checkouts page for the borrower
For a search with one result, you are redirected directly to the checkout page for the borrower
For a search with many results, you are redirected to the patron search results
and there is a 'Checkout' button under the cardnumber
4 - Confirm circulation page works as expected (i.e. checkout to a patron)
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: George Williams <george@nekls.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Some of our partners have unusual barcode requirements that have
required us to transform scanned barcodes using javascript. This is not
the most reliable method. It would make more sense to have Koha
transform the barcodes on the backend using a plugin. We should add
hooks to transform and generate new item and patron barcodes.
Test Plan:
1) Apply this patch
2) Download and install the Barcode Transformer plugin
https://github.com/bywatersolutions/koha-plugin-barcode-transformer/releases/download/v1.0.1/koha-plugin-barcode-transformer-v1.0.1.kpz
3) Go to the plugin configuration page, set the configuration to the example configuration from the same page
4) In the patron search and anywhere else you can scan a patron
cardnumber, type in some cardnumbers but prefix them with A and postfix
them with A or B, e.g. A12345A, A12345B
5) Note the letters are removed by Koha!
6) Try a cardnumber like X123456Y
7) Note Koha converts it to Z13456Z
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Some of our partners have unusual barcode requirements that have
required us to transform scanned barcodes using javascript. This is not
the most reliable method. It would make more sense to have Koha
transform the barcodes on the backend using a plugin. We should add
hooks to transform and generate new item and patron barcodes.
Test Plan:
1) Apply this patch
2) Download and install the Barcode Transformer plugin
https://github.com/bywatersolutions/koha-plugin-barcode-transformer/releases/
3) Go to the plugin configuration page, set the configuration to the example configuration from the same page
4) In the item barcode field on the checkin and checkout pages,
and anywhere else you can scan an item barcode, type in some
valid barcodes, but prefix them with X and postfix them with
Y, e.g. X123456Y
5) Note the letters are removed by Koha!
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Bug 26351: (QA follow-up) Fix QA script issue
* Fixes issue with barcode generate stub so perlcritic is happy
* Removes extra semicolon from return call in configure method
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Bug 26351: Add unit tests
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Bug 26351: (QA follow-up) Remove unused method barcode_transform
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Bug 26351: (QA follow-up) Rename barcode_transform to item_barcode_transform
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Bug 26351: (QA follow-up) Barcodes inputted into Koha should always pass though barcodedecode
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Bug 26351: (QA follow-up) Catch one last case of itemBarcodeInputFilter
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Bug 26351: (QA follow-up) Fix Checkouts.t
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Bug 26351: Use call_recursive() as a replacement for call()
The method `call()` is not sufficient for barcode transformations. It's
possible that more than one barcode transformation plugin will be
installed. The `call_recursive()` method takes the output of the first
plugin and uses it as the input for the next plugin and so on. This allowes
each plugin to see the current version of the barcode and modify it if
necessary.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Bug 26351: Fix t/db_dependent/Koha/Plugins/Circulation_hooks.t
Bug 26351: Revert improper change to unit test, fix number of tests
Bug 26351: Remove uneeded use Koha::Plugins statements
Left over from previous changes
Bug 26351: Add missing barcodedecode import
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds better error handling and reporting when placing an
article request fails. It also makes the error messages translatable.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch makes it possible to limit article requests per patron per day.
To test:
1. Apply patches
2. updatedatabase
3. Enable ArticleRequests preference
4. Edit a patron category and set an article request limit to 1
CHECK => if you set the limit to anything else but a positive number or empty string, a warning appears
5. In staff search biblios and request an article for a patron of the modified category
6. Repeat step 5
SUCCESS => if limit is reached, when you select the user to request an article a warning appears saying that the limit was reached
7. Repeat steps 5 and 6 but this time in opac
SUCCESS => Patron is not allowed to request another article if limit is reached
8. prove t/db_dependent/ArticleRequests.t
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Edit: This patchset originally changed the 'categories' table structure
and relied on that for limit calculation. I removed all that code and
squashed into this one, as we moved everything to the circulation_rules
table.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds the stage "requested" in article request process, which
is previous to pending stage.
To test:
1. apply this patch
2. updatedatabase
3. enable ArticleRequests syspref
4. from staff inteface and from opac search for a record and place an
article request
5. koha-mysql kohadev
6. query: select subject, content, letter_code from message_queue;
CHECK => There is a message for each article request with code
AR_REQUESTED
=> In opac-user.pl, in "Article requests" tab you should see a row
in the table with "Requested" status
5. in staff go to Circulation -> Article Requests
SUCCESS => You should see 3 tabs, one for Requested stage (with two
requests), one for Pending stage and one for Processing stage.
6. play with actions buttons
CHECK => you should see a new action called "Set request as pending"
SUCCESS => All action buttons behave as expected, and tab counts updates
correctly.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch allows staff patrons to cancel multiple holds in bulk.
To test:
1. Apply this patch
2. restart_all
3. In cataloge go to a book and place many holds
CHECK => Holds table shows a column of checkboxes
4. Play with checkboxes (have some fun ;-P)
CHECK => When you manually check all checkboxes, the checkbox in the
header also gets checked.
=> When you uncheck one of the checkboxes, the one in the header also gets unchecked.
=> If no checkbox is checked and you check the one in the header,
all checkboxes get checked.
=> If there are some checkboxes that are checked and others are
not, when you click on the checkbox in the header all checkboxes get
unchecked.
=> If all checkboxes are checked, when you uncheck the one in the
header, all checkboxes get unchecked.
=> Every time you play with checkboxes, the number in the button
"Cancel selected" changes.
5. Check some of the checkboxes and click on cancel selected.
SUCCESS => A background job gets fired to cancel all selected holds.
=> A message should appear with a link to the job.
6. Wait a few seconds and click on the link
SUCCESS => A message appears with the report of the execution of the
background job.
7. Grab a patron and search to hold
8. Select multiple biblios and click on "place hold for <patron>"
CHECK => After holds are confirmed, multiple holds table are shown.. one for
each record. Checkboxes work exactly the same as before, but scoped
for each individual table. Checkboxes from one table will not affect
checkboxes from other tables.
9. Repeat steps 4 to 6.
10. Check In some of the items so the get in Waiting state.
11. Update expirationdate os some of those holds and set it to
ReservesMaxPickUpDelay + 1 days earlier
NOTE => ReservesMaxPickUpDelay = 7 days by default, so sql syntax to update would be
=> update reserves set expirationdate = date_sub(expirationdate, interval 8 day) where reserve_id in (...)
12. Repeat steps 4 to 6 but in waitingreserves.pl, in both tabs.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Bug 23678: (QA follow-up) Add missing template filter
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Bug 23678: (QA follow-up) Add missing filters
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Bug 23678: (QA follow-up) Use correct indentation
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
JD amended patch: also Koha/BackgroundJob/BatchCancelHold.pm
JD Amended patch: Full rebase and adjustements made on top of bug 26080.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
To test:
1. have some overdues
2. go to the overdue report on the circulation page (overdue.tt)
3. no shelving location
4. apply patch and restart the things
5. look at the overdue report again and there should be a Shelving location column
6. make sure it is accurate
7. go to table settings and make sure you can properly hide the column. test other columns in the table and make sure they are still hiding correctly as well
Signed-off-by: Kelly McElligott <kelly@bywatersolutions.com>
Signed-off-by: Barbara Johnson <barbara.johnson@bedfordtx.gov>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch modifies the patron search autocomplete so that library name
is shown instead of library code.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch alters a few different patron search interfaces so that
patrons from the currently-logged-in library are highlighted in a way
that differentiates them from other patrons.
To test, apply the patch and rebuild the staff interface CSS
(https://wiki.koha-community.org/wiki/Working_with_SCSS_in_the_OPAC_and_staff_client).
- In Administration -> System preferences, make sure the
PatronAutoComplete preference is enabled.
- In the "Check out" tab in the header, type a partial patron name which
will return multiple results and wait for the autocomplete menu to
appear..
- Patrons in the autocomplete results should show the branchcode, and
patrons from the currently-logged-in library should be highlighted
in green.
- Submit your partial name in the "check out" tab.
- In the search results the branch name of patrons from the
currently-logged-in library should be similarly highlighted.
- Go to patrons browse for patrons. These results should be highlighted
as in the previous steps.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Sally <sally.healey@cheshiresharedservices.gov.uk>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
On bug 17591 we discovered that there was something weird going on with
the way we export and use subroutines/modules.
This patch tries to standardize our EXPORT to use EXPORT_OK only.
That way we will need to explicitely define the subroutine we want to
use from a module.
This patch is a squashed version of:
Bug 17600: After export.pl
Bug 17600: After perlimport
Bug 17600: Manual changes
Bug 17600: Other manual changes after second perlimports run
Bug 17600: Fix tests
And a lot of other manual changes.
export.pl is a dirty script that can be found on bug 17600.
"perlimport" is:
git clone https://github.com/oalders/App-perlimports.git
cd App-perlimports/
cpanm --installdeps .
export PERL5LIB="$PERL5LIB:/kohadevbox/koha/App-perlimports/lib"
find . \( -name "*.pl" -o -name "*.pm" \) -exec perl App-perlimports/script/perlimports --inplace-edit --no-preserve-unused --filename {} \;
The ideas of this patch are to:
* use EXPORT_OK instead of EXPORT
* perltidy the EXPORT_OK list
* remove '&' before the subroutine names
* remove some uneeded use statements
* explicitely import the subroutines we need within the controllers or
modules
Note that the private subroutines (starting with _) should not be
exported (and not used from outside of the module except from tests).
EXPORT vs EXPORT_OK (from
https://www.thegeekstuff.com/2010/06/perl-exporter-examples/)
"""
Export allows to export the functions and variables of modules to user’s namespace using the standard import method. This way, we don’t need to create the objects for the modules to access it’s members.
@EXPORT and @EXPORT_OK are the two main variables used during export operation.
@EXPORT contains list of symbols (subroutines and variables) of the module to be exported into the caller namespace.
@EXPORT_OK does export of symbols on demand basis.
"""
If this patch caused a conflict with a patch you wrote prior to its
push:
* Make sure you are not reintroducing a "use" statement that has been
removed
* "$subroutine" is not exported by the C4::$MODULE module
means that you need to add the subroutine to the @EXPORT_OK list
* Bareword "$subroutine" not allowed while "strict subs"
means that you didn't imported the subroutine from the module:
- use $MODULE qw( $subroutine list );
You can also use the fully qualified namespace: C4::$MODULE::$subroutine
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch creates a new include for showing circulation and
patron-related messages on both the checkout page and the patron detail
page. This allows the two pages to be consistent with each other.
The patch also makes some minor CSS adjustments, including the addition
of an SVG to replace an old GIF, arrow-bullet.gif.
To test, apply the patch and rebuild the staff interface CSS
(https://wiki.koha-community.org/wiki/Working_with_SCSS_in_the_OPAC_and_staff_client).
- View both the checkout and patron details page for patrons in the
staff interface, confirming that the information is displayed in the
same way, including:
- Pending modifications
- Pending expiration
- Expired
- Address in doubt
- Card lost
- Restricted (indefinite and with expiration)
- Outstanding overdues
- Outstanding return claims
- Patron age incorrect for their category
- Outstanding charges
- Account credit
- Waiting holds (at logged-in library or other library)
- Circulation note (from borrowers.borrowernotes)
- Messages (added at logged-in library or other library)
EDIT: Fixed merge error.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
We need to add the format to the forms entering new requests:
opac/opac-request-article
circ/request-article
If the pref contains multiple formats like SCAN|PHOTOCOPY, the first listed
format will be preselected on the request form. If there is only one option,
we should not disable the select however. (Possibly hide it.)
If we have no mandatory fields, we should not allow the submit of a complete
empty form (check on OPAC).
And we need to show the format of pending requests on forms:
opac/opac-user
circ/request-article (biblio detail tab)
circ/article-requests (staff form to handle requests)
members/moremember (Article requests tab at the bottom)
circ/circulation (Checkout/Article requests tab)
Note: The last two forms use the same include file.
Test plan:
[1] Add an article request via opac or staff. Choose Scan.
[2] Verify that you see the Scan format on opac-user and the
above-mentioned staff forms.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
We should remove the debug statements or use Koha::Logger when we want
to keep it.
Test plan:
Confirm that occurrences of remaining occurrences of DEBUG need to be
kept (historical scripts for instance)
Confirm that the occurrences removed by this patch can be removed
Confirm that the occurrences replaced by Koha::Logger are correct
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Looks good to me, noting a few minor points on BZ.
JD amended patch: replace "warn #Finished" with "#warn Finished", and
put the statement on a single line
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch replaces a few more trivial cases where we were using
library->branchemail with a fallback to KohaAdminEmail to just use the
new library->from_email_address method directly instead.
There were also a couple of cases where we were passing borrowernumber
and the patrons library from address too.. this is unneccesary as the
code in _send_email_massage will already default to patron library from
address if we do not pass an override.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Added a semicolon.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
We are using Koha::Logger when it makes sense to keep the info,
otherwise we simply remove it
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Bug 28572: Replace missing occurrence in misc/admin/koha-preferences
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
There is a "debug" parameter we are passing from the controller scripts
to C4::Auth::get_template_and_user, but it's not actually used!
Test plan:
Confirm the assumption
Review the changes from this patch
Generated with:
perl -p -i -e 's#\s*debug\s*=\>\s*(0|1),?\s*##gms' **/*.pl
git checkout misc/devel/update_dbix_class_files.pl # Wrong catch
+ Manual fix in acqui/neworderempty.pl
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Add unit tests to cover updateWrongTransfer
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 24434: (QA follow-up) Remove tab character
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch re-instates the call to updateWrongTransfer to ensure the
transfer line is updated to reflect the new frombranch.
Test plan
note: when applying the patches, also update the database
1/ Check an item out from it's home library
2/ Check the item in at another library
(with AutomaticItemReturn system preferences enabled)
2a/ Accept the transfer and note we now have a transfer present from the
items check-in library to it's home library
3/ Check the item in at a third library
3a/ Note you are asked to return the item to it's home library.
3b/ With the patch applied, the modal title should highlight that a
'Wrong transfer' was detected.
4/ Go to the item record and note the holding library has been updated
to reflect where the item was most recently checked in.
4a/ With the patch applied the item status should reflect the last
checked in branch as the 'from' branch of the transfer.
5/ check-in from a 4th library, but use the 'Print slip' option for
accepting the transfer and confirm that also works.
6/ check-in from a 5th library, but use the 'Cancel' option and check
that this results in the item staying at it's current location and the
final transfer having been cancelled.
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Lucas Gass
Joonas Kylmälä
Shi Yao Wang
Nick Clemens
Kyle Hall
Jonathan Druart
Janusz Kaczmarek
Blou
Tomas Cohen Arazi
Marion Durand
David Gustafsson
Fridolin Somers
Katrin Fischer
Michael Hafen
Petro Vashchuk
Martin Renvoize
Agustin Moyano
Marcel de Rooy
Owen Leonard