To test:
1 - confirm whether or not NewsLog is enabled on your system
2 - apply patch, updatedatabase, restart_all
3 - search system preferences, confirm you now have
AdditionalContentLog rather than NewsLog and that the new
description is accurate
4 - confitm AdditionalContentLog shows the value you previously had for
NewsLog
5 - go to Tools > Log Viewer
6 - confirm the checkbox here is labeled "Additional Content", that it
correctly reflects the syspref value, and that it links to the
syspref
7 - with AdditionalContentLog enabled, created/edit/delete news, HTML
customizations, and pages. confirm they log
8 - with AdditionalContentLog disabled, created/edit/delete news, HTML
customizations, and pages. confirm they don't log
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Pedro Amorim <pedro.amorim@openfifth.co.uk>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
(cherry picked from commit 9805b4cb3e)
Signed-off-by: Paul Derscheid <paul.derscheid@lmscloud.de>
This patch moves the IntranetReportsHomeHTML system preference into
HTML customizations, making it possible to have language- and
library-specific content.
To test you should have some content in the IntranetReportsHomeHTML
system preference before applying the patch. Apply the patch and run the
database update process.
- In the staff client, go to Tools -> HTML customizations and verify
that the content from IntranetReportsHomeHTML is now stored there.
- The HTML customization entry form should offer
IntranetReportsHomeHTML as a choice under "Display location."
- Update and reinstall active translations (for instance fr-FR):
- perl misc/translator/translate update fr-FR
- perl misc/translator/translate install fr-FR
- Enable the translation if necessary under Administration -> System
preferences -> language.
- Edit the IntranetReportsHomeHTML HTML customization and add unique
content to the "fr-FR" tab.
- Go to the reports home page. You should see the
content you added to the IntranetReportsHomeHTML HTML
customization.
- Switch to your updated translation and confirm that the content you
added for your translation shows up correctly.
- Go to Administration -> System preferences and search for
"IntranetReportsHomeHTML." It should return no results.
Sponsored-by: Athens County Public Libraries
Signed-off-by: Ray Delahunty <lib-systems@arts.ac.uk>
Signed-off-by: Lisette Scheer <lisette@bywatersolutions.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
(cherry picked from commit 20caaf611a)
Signed-off-by: Paul Derscheid <paul.derscheid@lmscloud.de>
No idea why it was not NULL in DB when I did my first SELECT
Signed-off-by: Martin Renvoize <martin.renvoize@openfifth.co.uk>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
(cherry picked from commit fe14f8b7c6)
Signed-off-by: Paul Derscheid <paul.derscheid@lmscloud.de>
Some sysprefs have NULL as their default value, and systempreferences.value allows NULL values.
However C4::Context->set_preference does not unset a syspref if "undef" is passed.
Additionally some of the sysprefs that have NULL as default will generate warnings in the logs (and test suite output).
opac/opac-suggestions.pl: for my $f ( split( /\s*\,\s*/, C4::Context->preference("OPACSuggestionUnwantedFields") ) ) {
Here is the current list:
+-------------------------------+-------+
| variable | value |
+-------------------------------+-------+
| decreaseLoanHighHoldsDuration | NULL |
| decreaseLoanHighHoldsValue | NULL |
| ILLHiddenRequestStatuses | NULL |
| ILLOpacbackends | NULL |
| ILLSendStaffNotices | NULL |
| ListOwnerDesignated | NULL |
| MarcFieldDocURL | NULL |
| MaxFine | NULL |
| OPACSuggestionUnwantedFields | NULL |
| ReportsExportLimit | NULL |
| SerialsSearchResultsLimit | NULL |
+-------------------------------+-------+
Test plan:
Code review required here, please confirm the above and that the
different occurrences do not use "undef" as a value.
Note that some tests now do not longer generate warnings
(eg. t/db_dependent/selenium/opac_ill_requests.t)
Signed-off-by: Martin Renvoize <martin.renvoize@openfifth.co.uk>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
(cherry picked from commit a3b4b5cdd0)
Signed-off-by: Paul Derscheid <paul.derscheid@lmscloud.de>
- Update the dbrev to use say_success, and make dbrev and installer
consistent
- Change error div in moredetail.tt from info to warning
Signed-off-by: Emily Lamancusa <emily.lamancusa@montgomerycountymd.gov>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
(cherry picked from commit 3096833130)
Signed-off-by: Paul Derscheid <paul.derscheid@lmscloud.de>
To test:
1. APPLY PATCH, updatedatabase, and restart_all
2. Search for the system preference, PreventWithDrawingItemsStatus
3. Select both in transit and checked out, then save
4. Find an item and put it in transit.
5. Now from the item detail page, go to manage items > edit item
6. Using the item that was put in transit, attempt to change the status to withdrawn.
7. You should see an error at the top of the page 'In transit item cannot be withdrawn.' Make sure the item did not get marked as withdrawn.
8. Using a different item, do a checkout
9. Now from the item detail page, go to manage items > edit item
10. Using the checked out item, attempt to change the status to withdrawn.
11. vYou should see an error at the top of the page 'Onloan item cannot be withdrawn.' Make sure the item did not get marked as withdrawn.
12. Now, using the in transit item, go to the items tab. ( catalogue/moredetail.pl?biblionumber=x )
13. Under Statuses, attempt to withdraw the item.
14. You should see an error near the top of the page "Cannot withdraw item in transit".
15. Now, using the checked out item, go to the items tab. ( catalogue/moredetail.pl?biblionumber=144 )
16. Under Statuses, attempt to withdraw the item.
17. You should see an error near the top of the page "Cannot withdraw checked out item.".
18. Using both the in-transit and checked out item, attempt to modify the status through batchMod.
19. Ensure that the items are not being updated to withdrawn.
20. Turn off PreventWithDrawingItemsStatus system preferece.
21. Going through each of the steps again, except this time your items should successfully withdraw.
prove t/db_dependent/Koha/Item.t
Signed-off-by: Roman Dolny <roman.dolny@jezuici.pl>
Signed-off-by: Emily Lamancusa <emily.lamancusa@montgomerycountymd.gov>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
(cherry picked from commit 4e920be91f)
Signed-off-by: Paul Derscheid <paul.derscheid@lmscloud.de>
This follow-up adds two major enhancements to the locale-based facet sorting
implementation:
1. **System Preference Integration**
- Adds FacetSortingLocale system preference for configurable locale selection
- Dynamically detects available system locales using Koha::I18N
- Provides user-friendly dropdown with locale descriptions
- Supports both Elasticsearch and Zebra search engines
2. **Zebra Search Engine Support**
- Extends locale-based sorting to Zebra (in addition to existing Elasticsearch)
- Implements _sort_facets_zebra() function in C4::Search
- Maintains consistent Unicode-aware sorting behavior across search engines
Key Features:
- Dynamic locale detection via Koha::I18N::available_locales()
- Proper module architecture with comprehensive unit tests
- Clean fallback chain: preference → system LC_COLLATE → default
- Admin UI integration in System Preferences → I18N/L10N
- Universal facet sorting for international library systems
Test plan:
1. Apply patch and restart services
2. Install/run database update
3. Navigate to Administration → System Preferences → I18N/L10N
4. Verify "Sort facet names using" dropdown shows available system locales
5. Test facet sorting with different locales and both search engines
6. Run: prove t/Koha/I18N.t t/Koha/SearchEngine/Elasticsearch/Search.t t/db_dependent/Search_FacetSorting.t
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Martin Renvoize <martin.renvoize@openfifth.co.uk>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
(cherry picked from commit 146aca25f5)
Signed-off-by: Paul Derscheid <paul.derscheid@lmscloud.de>
Some web-browsers now only allow HTTPS, we should change links in
templates with SSL :
https://schema.koha-community.org, https://wiki.koha-community.org ...
Test plan :
Just look patch to check http > https
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
(cherry picked from commit 2f864811ef)
Signed-off-by: Paul Derscheid <paul.derscheid@lmscloud.de>
The SQL file doesn't load properly due to a missing comma - this patch fixes that
Signed-off-by: Matt Blenkinsop <matt.blenkinsop@openfifth.co.uk>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This fixes the holds queue and associated tests.
I also updated the sql file to fix an issue and the LocalHoldsPriority tests to fix a typo.
I'm working on final unit tests for the holds queue for all the options for QA but I wanted to get the queue changes ready for sign-off.
UPDATED TEST PLAN
This patch adds new options to the LocalHoldsPriority system preference to allow for the following options:
'None' the equivalent to 'Don't' pre-patch
'GiveLibrary' the equivalent to 'Do' pre-patch
'GiveLibraryAndGroup' Allows for checking the library first, then hold groups
'GiveGroup' Allows to prioritize within a group without prioritizing any library first.
The included patches will update the preference in existing installations to maintain current behavior.
To Test:
BEFORE APPLYING THE PATCH
/Tip/
I kept the following tabs open:
-The holds screen (for suspending, checking order, etc)
-Check in screen (can ignore holds to keep them all in place)
-Holds to Pull with "All" for Libraries
-System Preferences
/Setup Groups and confirm current behavior/
1. Set the following system preferences:
-" LocalHoldsPriority " system preference to "Give"
-"LocalHoldsPriorityPatronControl" to "home library"
-"LocalHoldsPriorityItemControl" to "home library"
-"RealTimeHoldsQueue" to "Enable"
2. Create 2 Library Groups
- Set them to be hold groups
- I called mine group 1 & group 2
3. Add 2 libraries each to each group.
- Group 1
- Centerville
- Fairfield
- Group 2
- Fairview
- Franklin
4. Find a patron for each branch in the groups
- Centerville - Changed 23529000035676 (Henry)
- Fairfield - Changed 23529000050113 (Jordan)
- Fairview - Changed 23529001000463 (Edna)
- Franklin - 23529000121682 (Nicole)
5. Find a record with at least 2 items
6. If needed change the home and holding libraries so you have at least one item for each hold group
- Centerville - 39999000000252
- Fairview - Changed 39999000000238
7. Place 2 record level holds for the record.
- One for 23529000035676 (Henry) for pickup at Centerville (Priority 1)
- One for 23529001000463 (Edna) for pickup at Fairview (Priority 2)
8. Check in 39999000000238. The hold popup should be for the second hold (Henry), not the first (Edna.) Ignore the hold
9. Edit the record then save to trigger real time queue update
10. On the Holds Queue (submit after each set of changes):
- Centerville should be for Henry
- Fairview should be for Edna
/apply patch and confirm behavior still works/
10. Apply patch
11. Rebuild the database then restart_all (in sandboxes it's an action, in ktd " dbic && updatedatabase && restart_all ")
12. Confirm that " LocalHoldsPriority " is set to "Give Library"
13. Repeat steps 8-10, behavior should be the same.
/ check library then library group setting/
14. Change " LocalHoldsPriority " to "Give library then library group"
15. Set the following record level holds for the record in the following order:
*You can add Jordan and Nicole's, then rearrange the order.
- Pickup at Fairfield - 23529000050113 (Jordan)
- Pickup at Franklin - 23529000121682 (Nicole)
- Pickup at Centerville - 23529000035676 (Henry)
- Pickup at Fairview - 23529001000463 (Edna)
17. Check in 39999000000252 - should try and fill to Centerville - 23529000035676 (Henry)
17. Check in 39999000000238 - should try and fill to Fairview - 23529001000463 (Edna)
18. On the Hold Queue:
- Centerville should be for Henry
- Fairview should be for Edna
19. Suspend the hold for 23529001000463 (Edna)
20. Check in 39999000000238 should try and fill to 23529000121682 (Nicole) (ignore the hold)
21. On the Holds Queue:
- Centerville should be for Henry
- Fairview should be for Nicole
/ check library group setting /
22. Reset the holds to match step 15.
23. Change " LocalHoldsPriority " to "Give group"
24. Check in 39999000000252 - should try and fill to Fairfield (Jordan) (ignore the hold)
25. Check in 39999000000238 - should try and fill to Franklin (Nicole) (ignore the hold)
26. On the Holds Queue:
- Centerville should be for Jordan
- Fairview should be for Nicole
/check no priority /
27. Change " LocalHoldsPriority " to "Don't give"
28. Reset the holds to match step 15.
29. Check in 39999000000238 - Should fill to Fairfield (Jordan) (ignore the hold)
30. Check in 39999000000252 - Should fill to Fairfield hold (Jordan) (ignore the hold)
31. On the Holds Queue:
- Centerville should be for Jordan
- Fairview should be for Nicole
/Also check/
Item level holds behave as expected
Different combinations of LocalHoldsPriorityItemControl and LocalHoldsPriorityPatronControl
Sponsored by: Cape Libraries Automated Materials Sharing
Sponsored by: Northeast Kansas Library System (NEKLS)
Signed-off-by: Brendan Lawlor <blawlor@clamsnet.org>
Signed-off-by: Matt Blenkinsop <matt.blenkinsop@openfifth.co.uk>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch adds new options to the LocalHoldsPriority system preference to allow for the following options:
'None' the equivalent to 'Don't' pre-patch
'GiveLibrary' the equivalent to 'Do' pre-patch
'GiveLibraryAndGroup' Allows for checking the library first, then hold groups
'GiveGroup' Allows to prioritize within a group without prioritizing any library first.
The included patches will update the preference in existing installations to maintain current behavior.
To Test:
BEFORE APPLYING THE PATCH
/Setup Groups and confirm current behavior/
1. Set the " LocalHoldsPriority " system preference to "Give", "LocalHoldsPriorityPatronControl" to "home library" and "LocalHoldsPriorityItemControl" to "home library"
2. Create 2 Library hold Groups
- I called mine group 1 & group 2
3. Add 2 libraries each to each group.
- Group 1
- Centerville
- Fairfield
- Group 2
- Fairview
- Franklin
4. Find a patron for each branch in the groups
- Centerville - 23529000035676 (Henry)
- Fairfield - Changed 23529000050113
- Fairview - Changed 23529001000463 (Edna)
- Franklin - 23529000121682
5. Find a record with at least 2 items
6. If needed change the home and holding libraries so you have at least one item for each hold group
- Centerville - 39999000000252
- Fairview - Changed 39999000000238
7. Place 2 record level holds for the record.
- One for 23529000035676 for pickup at Centerville (Priority 1)
- One for 23529001000463 for pickup at fairview (Priority 2)
8. Check in 39999000000238. The hold popup should be for the second hold, not the first.
/apply patch and confirm behavior still works/
9. Apply patch
10. Rebuild the database then restart_all (in sandboxes it's an action, in ktd " dbic && updatedatabase && restart_all ")
11. Confirm that " LocalHoldsPriority " is set to "Give Library"
12. Repeat steps 7-8, behavior should be the same.
/ check library then library group setting/
13. Change " LocalHoldsPriority " to "Give library then library group"
14. Set the following record level holds for the record:
- Pickup at Fairfield - 23529000050113
- Pickup at Franklin - 23529000121682
- Pickup at Centerville - 23529000035676 (Henry)
- Pickup at Fairview - 23529001000463 (Edna)
15. Check in 39999000000252 - should try and fill to Centerville - 23529000035676 (Henry)
16. Check in 39999000000238 - should try and fill to Fairview - 23529001000463 (Edna)
17. Cancel the hold for 23529001000463
18. Check in 39999000000238 should try and fill to 23529000121682
/ check library group setting /
19. Reset the holds to match step 14.
20. Check in 39999000000252 - should try and fill to Fairfield
21. Check in 39999000000238 - should try and fill to Franklin
/check no priority /
22. Reset the holds to match step 14.
23. Check in 39999000000238 - Should fill the Fairfield hold
24. Check in 39999000000252 - Should fill the Franklin hold
/Also check/
Item level holds behave as expected
Different combinations of LocalHoldsPriorityItemControl and LocalHoldsPriorityPatronControl
Sponsored by: Cape Libraries Automated Materials Sharing
Sponsored by: Northeast Kansas Library System (NEKLS)
Signed-off-by: Jason Robb <jrobb@sekls.org>
Signed-off-by: Brendan Lawlor <blawlor@clamsnet.org>
Signed-off-by: Matt Blenkinsop <matt.blenkinsop@openfifth.co.uk>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch adds a new preference 'CardnumberLog' which allows libraries
to track cardnumebr changes for patrons.
While these changes are currently captured in the BorrowersLog, some libraries
would like to keep cardnumber chanegs specifically, and for a longer period than
other borrower modifications.
To test:
1 - Apply patches, update database
2 - Ensure BorrowersLog and CardnumberLog are enabled
3 - Edit a borrower, not thier cardnuber
4 - Confirm in Modification Log only one entry is recorded
5 - Edit again, changing cardnumber only
6 - Confirm 2 modifications are recorded, a MODIFY and a MODIFY_CARDNUMBER
7 - Disable BorrowersLog
8 - Edit patron changing something other than cardnumber
9 - Confirm no log generated
10 - Edit borrowers cardnumber
11 - Confirm one MODIFY_CARDNUMBER recorded
12 - Disable CardnumberLog
13 - Edit patrons cardnumber and other fields
14 - Confirm no logs generated
Signed-off-by: Philip Orr <philip.orr@lmscloud.de>
Signed-off-by: Martin Renvoize <martin.renvoize@openfifth.co.uk>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Magnus Enger <magnus@libriotech.no>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Magnus Enger <magnus@libriotech.no>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Some libraries are getting dates of birth from the
self-registration form that make patrons impossible
ages, e.g. year of birth 1900.
To Test:
1) Navigate to the oPac
2) Ensure you are not logged in
3) Below the log in, see 'Create an Account'
4) Click the link and complete the relevant fields
5) Add an unrealistic d.o.b e.g 1900
6) Complete the verification and click 'Submit'
7) Your acount has been created
8) Apply the patch
9) Navigate to the staff site
10) Navigate to Administration > SystemPreferences
11) Navigate to OPAC preferences
12) Identify PatronSelfRegistrationAgeRestriction
13) Add a maximum age in numberals e.g. 100
14) Repeat steps 1 - 6
15) An error message that you have exceeded max age will appear.
16) Alter your date of birth to make your age below that of the max age you set
17) Complete the verification
18) Your account should be created as normal
Sponsored-by: Cheshire
Signed-off-by: Emmanuel Bétemps <e.betemps@gmail.com>
Signed-off-by: Lisette Scheer <lisette@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This commit addresses all Hackfest QA related feedback:
1) Update of all strings that required update, including UI messages and
sys pref description
2) Moved the history check information from staffnotes to its own
pipe-separated illrequestattribute 'historycheck_requests'
3) Fix display of ILL request information on the history check screen
(Staff), including proper label naming (e.g. branchcode -> library),
show status description instead of code, uppercase labels.
4) Updated OPAC display to match Staff UI's display of matching history
requests
5) Removed ISSN criteria for matching requests check
6) Update tests accordingly
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Lisette Scheer <lisette@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
We need to adjust kohastructure.sql, sysprefs.sql and the DB itself.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@openfifth.co.uk>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This bug will rename the UseEmailReceipts to AutomaticEmailReceipts, to
make it clearer the purpose of this syspref. This is because the receipts
dropdown is no longer conditional, and will always show, even if
AutomaticEmailReceipts is switched off.
To test (steps a-e before applying patch):
a) search sysprefs for 'EmailReceipts'
1) note the name is currently 'UseEmailReceipts'
2) enable this syspref
b) go to members/maninvoice.pl?borrowernumber=51
1) enter an amount (e.g. 100)
2) save & pay, confirm
c) go to members/boraccount.pl?borrowernumber=51
1) note that the receipt dropdown is visible
d) go to members/notices.pl?borrowernumber=51
1) note that a receipt was automatically sent
e) apply the patch, upgrade the db schema
f) search sysprefs for 'EmailReceipts'
1) note the name is now 'AutomaticEmailReceipts'
g) go to members/maninvoice.pl?borrowernumber=51
1) enter an amount (e.g. 100)
2) save & pay, confirm
h) go to members/boraccount.pl?borrowernumber=51
1) note that the receipt dropdown is no longer visible
i) go to members/notices.pl?borrowernumber=51
1) note that a receipt was automatically sent again
j) disable the 'AutomaticEmailReceipts' syspref
k) go to members/memberentry.pl?op=edit_form&destination=circ&borrowernumber=19
1) add a valid email address
k) go to members/maninvoice.pl?borrowernumber=51
1) enter an amount (e.g. 100)
2) save & pay, confirm
l) go to members/boraccount.pl?borrowernumber=51
1) note that the receipt dropdown is now visible
m) go to members/notices.pl?borrowernumber=51
1) note that a receipt was NOT automatically sent
n) go to members/boraccount.pl?borrowernumber=51
1) on any account line where a payment is made, click receipts > email
o) go to members/notices.pl?borrowernumber=51
1) confirm a manual notice has been generated
p) make coffee & have a mini disco
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
to keep the syspref names consistent with the existings values. Also "ES" is not as self-documenting as "Elasticsearch".
No code change, so the test plan stays the same.
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
What this patch does is:
1 - Wraps the existing search code in a a "bool" compound query as a "must". This should not affect
relevancy or results of the existing searches.
2 - Before we clean/truncate terms, loop through the passed in search terms and indexes to build a
new 'should' query, using the 'match' on the specified index/field that is added to the 'bool' query from above.
This means that if a result from the original query is also returned here, that item will be boosted in the result.
For searches on 'keyword' or 'title', or if no index is set, we use 'title-cover' as the most narrow form of title
This query isn't going to help when users enter CCL (i.e. ti:To die for) and it won't boost titles from 505, series, etc
when doing a general search. Nor will it have a detrimental effect, it will only boost field matches
To test:
1 - Add a record with
245 $a novel
2 - Add a record with
245 $a A novel : $b about things / $c by me
3 - Search for: novel
- Above records are returned lower in the list (results #6 and #14 for me)
4 - Search for: a novel
- Above records are returned lower in the list (results #6 and #14 for me)
5 - Apply patch, restart all, enable ESBoostFieldMatch option
6 - Repeat searches, note exact titles are boosted
- For 'novel' record from #1 is #1 result and other is second
- For 'a novel' record form #2 is #1 result and other is third
7 - Disable the new pref and repeat steps 3 and 4 and get results as before patch
8 - Experiment with other searches, turning pref on and off to verify relevant titles are boosted when enabled
9 - Search results when disabled should return as before the patch
Signed-off-by: Matthias Meusburger <matthias.meusburger@biblibre.com>
Signed-off-by: Thomas Klausner <domm@plix.at>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Currently, when reporting authority field to the bibliographic records,
the merge function uses the first matching authority field.
However, authorities can provide multiple versions of the same field, with
different languages, identified by a code in the $7 field.
French reference for languages codes for example, but any code system could be
used:
https://documentation.abes.fr/sudoc/formats/unmb/DonneesCodees/CodesZone104.htm#$d
This patch introduces the LanguageToReportOnMerge system preference, which
allows to specify a language code.
When set, if there is an authority field with the given language code, it will
be used to report to the bibliographic record.
If the system preference is not set, or there is no matching field, the default
behavior will apply: the first field will be used.
The $7 in the authority field can be in a short or long form:
- the short form is 2 characters long. Example: ba
- the long form is 8 characters long, with the short form in position 5 and 6
(starting from 1). Example: ba0yba0y
Test plan:
----------
1) Edit the 'Personal Name' authority type framework to make the 100 field
repeatable
2) Add an authority with several languages, like this (the order is important):
100 _7ba0yda0y
_a伊東豊雄
100 _7ba0yba0y
_aItō
3) Add a bibliographic record linked to that authority.
(Click on the "tag editor" icon next to the 100$a field in the bibliographic record to
search for the authority, then Search main heading ($a only): contains Itō)
Note that you can choose which version you want when searching for the
authority, under the "Get it!" column
For this example, choose the latin version: Itō
You should now have this in your bibliographic record:
100 _aItō
_92646
4) Edit the authority, you don't have to change anything, just edit and save.
Note that your bibliographic record now looks like this:
100 _7ba0yda0y
_a伊東豊雄
_92646
The first 100 field of the authority has been reported back to the bibliographic
record, regardless of what you chose when selecting the authority.
5) Apply the patch, set the LanguageToReportOnMerge system preference to: 'ba'
6) Edit the authority again, and check that your bibliographic record now looks
like this, according to the system preference:
100 _7ba0yba0y
_aItō
_92646
7) Edit the authority again, but set the $7 of the latin field to its short
form:
100 _7ba0yda0y
_a伊東豊雄
100 _7ba
_aItō
8) Check that the bibliographic record still has the latin field reported:
100 _7ba
_aItō
_92646
9) prove koha/t/db_dependent/Authority/Merge.t
10) Sign-off :)
Sponsored-by: ENSA
Works smoothly, both with UNIMARC/MARC21
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
Signed-off-by: Martin Renvoize <martin.renvoize@openfifth.co.uk>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
To test:
1) Apply patch
2) Make sure tests in t/db_dependent/Koha/SearchEngine/Elasticsearch.t
pass
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Thomas Klausner <domm@plix.at>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Multiple fixes:
- File permmissions
- Capitalization
- Translatability
- Use of console.log
- Atomic update description typo fix
- Remove occurrences of 'auto' and 'automatic':
User testing reported that making a UI distinction between 'regular' and 'automatic' ILL requests is redundant.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Sponsored-by: NHS England
Sponsored-by: PTFS Europe Ltd
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Add new system preference 'ConsiderHeadingUse' to be able to consider
the intended use of authority records (008/14-16) during cataloging
and linking.
Sponsored-by: Ignatianum University in Cracow
Signed-off-by: Roman Dolny <roman.dolny@jezuici.pl>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
To test:
1. APPLY PATCH, updatedatabase, restart_all
2. Search for the new system preference HoldCancellationRequestSIP, it should be set to 'Don't'. Leave it as is.
3. Make some holds, either in the staff client of via SIP.
-/kohadevbox/koha/misc/sip_cli_emulator.pl -a localhost -p 6001 -l CPL -su term1 -sp term1 -m hold --patron 23529000035676 --item 39999000001310 --hold-mode +
4. Mark the hold as waiting.
5. Cancel it via SIP:
-/kohadevbox/koha/misc/sip_cli_emulator.pl -a localhost -p 6001 -l CPL -su term1 -sp term1 -m hold --patron 23529000035676 --item 39999000001310 --hold-mode -
6. The hold is cancelled like normal, the screen msg should be "Hold Cancelled."
7. Change HoldCancellationRequestSIP to 'Do'.
8. Do steps 3-5 again.
9. Now the screen message is 'Hold Cancellation Requested.'
10. Now check Holds awaiting pickup. In the "Holds with cancellation requests" tab you should now see the hold from step 8.
Signed-off-by: Brendan Lawlor <blawlor@clamsnet.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Use say_success instead of say when outputting a line that the
system preference was added successfully
Signed-off-by: Emily Lamancusa <emily.lamancusa@montgomerycountymd.gov>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This adds a new system preference PatronSelfRegistrationAlert to enable
or disable alerts (disabled by default)
Test plan:
1. Create patron category SELFREG
2. Enable PatronSelfRegistration and set
PatronSelfRegistrationDefaultCategory to SELFREG and
PatronSelfRegistrationAlert to "Show"
3. Go to OPAC, logout if needed, and create a new account. Remember the
value you set for home library.
4. Go to staff interface, set the current library to the one you set in
step 3.
5. Go to the staff interface main page. You should see at the bottom a
message saying "Self-registrations from: All libraries: 1 /
<CURRENT LIBRARY>: 1" (numbers can vary if you already had
self-registered patrons)
6. Click on both links and verify that it shows the correct patrons (or
redirect to the patron detail page if there is only one)
7. Set the current library to another one (one that doesn't have
self-registered patrons)
8. Go to the staff interface main page. You should see at the bottom a
message saying "Self-registrations from: All libraries: 1"
(numbers can vary if you already had self-registered patrons)
9. Click on the link and verify that it shows the correct patrons (or
redirect to the patron detail page if there is only one)
Co-authored-by: Fridolin Somers <fridolin.somers@biblibre.com>
Co-authored-by: Julian Maurice <julian.maurice@biblibre.com>
Sponsored-by: Écoles nationales supérieures d'architecture (ENSA)
Signed-off-by: William Lavoie <william.lavoie@inLibro.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Standardize on the use of "self-registration" (and variations)
for consistency in the OPAC and staff interface, instead of
"self registration".
Test plan:
1. Check the codebase for occurences of "self reg":
. git grep "self reg"
. git grep "selfreg"
. git grep "Self reg"
. git grep "Selfreg"
2. Note the occurences, excluding code comments, previous
database updates, and previous release notes.
3. Search the system preferences for "self reg" and "selfreg".
4. Note the occurences in the results for the system preference
descriptions (excluding system preference names) for:
- PatronSelfRegistrationDefaultCategory
- PatronSelfRegistrationEmailMustBeUnique
- PatronSelfRegistrationLibraryList
- PatronSelfRegistrationPrefillForm
5. Note the system preferences category heading for the OPAC
- "Self registration and modification".
6. Apply the patch.
7. Repeat steps 1 to 5. There should now be no occurences
(excluding code comments, previous database updates, and
previous release notes).
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch moves the RoutingListNote system preference into HTML
customizations, making it possible to have language- and
library-specific content.
To test you should have some content in the RoutingListNote
system preference before applying the patch. Apply the patch and run
the database update process.
- In the staff client, go to Tools -> HTML customizations and verify
that the content from RoutingListNote is now stored there.
- The HTML customization entry form should offer RoutingListNote
as a choice under "Display location."
- Update and reinstall active translations (for instance fr-FR):
- perl misc/translator/translate update fr-FR
- perl misc/translator/translate install fr-FR
- Enable the translation if necessary under Administration -> System
preferences -> language.
- Edit the RoutingListNote HTML customization and add unique
content to the "fr-FR" tab.
- Go to Serials and create a subscription if necessary.
- From the subscription detail page, click "Create routing list" in the
left-hand sidebar.
- Add one or more recipients to the list and click "Save".
- On the "Preview routing list" page click "Save and preview routing
slip".
- In the pop-up window with the routing list preview you should see the
content you added to the RoutingListNote HTML customization.
- Switch to your updated translation and confirm that the content you
added for your translation shows up correctly.
- Go to Administration -> System preferences and search for
"RoutingListNote." It should return no results.
NOTE: This patch does not keep the default content which was stored by
the RoutingListNote system preference. Having a default value for that
kind of preference is not standard. Instead I have updated the
description of the RoutingSerials preference to add a mention of the
RoutingListNote HTML customization option.
Sponsored-by: Athens County Public Libraries
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch moves the StaffLoginInstructions system preference into HTML
customizations, making it possible to have language-specific content.
To test you should have some content in the StaffLoginInstructions
system preference before applying the patch. Apply the patch and run
the database update process.
- In the staff client, go to Tools -> HTML customizations and verify
that the content from StaffLoginInstructions is now stored there.
- The HTML customization entry form should offer StaffLoginInstructions
as a choice under "Display location."
- Update and reinstall active translations (for instance fr-FR):
- perl misc/translator/translate update fr-FR
- perl misc/translator/translate install fr-FR
- Enable the translation if necessary under Administration -> System
preferences -> language.
- Edit the StaffLoginInstructions HTML customization and add unique
content to the "fr-FR" tab.
- View the staff interface login page. You should see the
content you added to the StaffLoginInstructions HTML customization.
- Switch to your updated translation and confirm that the content you
added for your translation shows up correctly.
- Go to Administration -> System preferences and search for
"StaffLoginInstructions." It should return no results.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Pedro Amorim <pedro.amorim@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
To test:
1. Attach patch first, and then start up KTD or sandbox to see the
behavior for a new installation
2. Go to Administration > System Preferences and search for
DefaultPatronSearchFields
3. Click to edit
--> Confirm preferred_name is checked in the modal that displays
4. Edit a patron to give them a preferred name that is different from
their first name
5. Search for the patron by the newly set preferred_name
--> Confirm the patron correctly autocompletes and appears in the search
results
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Andrew Fuerste Henry <andrewfh@dubcolib.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch introduces a new syspref 'OPACLoginLabelTextContent' which can be set
to the following values
- Cardnumber
- Username
- Cardnumber or Username
To test:
- Check that the label for
- The masthead inc
- The opac-auth template
- The opac-main template
- The opac-password-recovery template
- The opac-registration-confirmation template
- The opac-reset-password template
- The sco-main template
reflect the changes you made to the syspref
Signed-off-by: Matt Blenkinsop <matt.blenkinsop@ptfs-europe.com>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch adds the preference "OPACOverDrive" to control whether
OverDrive features are shown in the OPAC. This allows a library to
disable OverDrive features without having to remove one or more of their
OverDrive credentials.
The patch also adds a check for the OPACOverDrive preference in the
OverDrive search results page. If OverDrive is disabled, navigating to
that page should give a 404.
To test you will need OverDrive credentials to test with.
- Apply the patch and run updatedatabase.
- If you already had data in the OverDriveLibraryID,
OverDriveClientKey, and OverDriveClientSecret system preferences,
the OPACOverDrive preference will be enabled when added. If not it
will be disabled by default.
- Rebuild the staff interface CSS
(https://wiki.koha-community.org/wiki/Working_with_SCSS_in_the_OPAC_and_staff_interface)
- Go to Administration -> System preferences -> Enhanced content ->
OverDrive.
- If necessary, enter valid credentials in the OverDriveLibraryID,
OverDriveClientKey, and OverDriveClientSecret system preferences.
- Set OPACOverDrive to "Don't enable."
- In the OPAC perform a catalog search. Normally, if your credentials
were correct OverDrive search results would automatically appear at
the top of Koha's search results. Now there should be none.
- Enable the OPACOverDrive preference and repeat your search. Now
OverDrive results should appear.
- Confirm that the OverDrive search results page works correctly.
- Test that OverDrive circulation features are working by logging in to
the OPAC as a user who has active OverDrive checkouts.
- Enable the OPACOverDrive and OverDriveCirculation system preferences.
- On the user's summary page there should be a tab for "OverDrive
account."
- The tab should not appear if either OPACOverDrive or
OverDriveCirculation is disabled.
Sponsored-by: Athens County Public Libraries
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This adds a new system preference 'AuthorityXSLTDetailsDisplay'.
If set, authority MARCXML will be transformed using the XSLT
at the given filename or URL.
The HTML output will be displayed in place of tabs in details page.
The syspref value can contain {langcode} and {authtypecode} which will
be replaced by the appropriate value (resp. current language and
authority type code).
Test plan:
1) Apply patch and run updatedatabase
2) Search for an authority type GEOGR_NAME and view details page
3) Verify that display is not affected yet
4) Create an XSLT file (for example in /home/koha/xslt/en/GEOGR_NAME.xsl)
5) Set 'AuthorityXSLTDetailsDisplay' system preference to :
/home/koha/xslt/{langcode}/{authtypecode}.xsl
6) Refresh details page
7) Verify that display matches what you expect from the XSLT
8) Set 'AuthorityXSLTDetailsDisplay' system preference to :
<path to sources>/koha-tmpl/intranet-tmpl/prog/en/xslt/UNIMARCauthDetails.xsl
8) Refresh details page
9) Verify that display matches what you expect from your XSLT
Example of a minimal XSLT:
<?xml version='1.0' encoding="UTF-8"?>
<xsl:stylesheet version="1.0"
xmlns:marc="http://www.loc.gov/MARC21/slim"
xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<xsl:output omit-xml-declaration="yes"/>
<xsl:template match="marc:record">
<xsl:element name="div">
<xsl:attribute name="class">
<xsl:text>authority-summary</xsl:text>
</xsl:attribute>
<xsl:value-of select="marc:datafield[@tag='151']/marc:subfield[@code='a']"/>
</xsl:element>
</xsl:template>
</xsl:stylesheet>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Andrew Fuerste Henry
Owen Leonard
Lucas Gass
Jonathan Druart
Emily Lamancusa
Martin Renvoize
Fridolin Somers
Katrin Fischer
Matt Blenkinsop
Lisette Scheer
Nick Clemens
Lari Taskula
Alexander Blanchard
Pedro Amorim
Pedro Amorim
Kyle Hall
PerplexedTheta
Thomas Klausner
Matthias Meusburger
David Gustafsson
David Cook
Janusz Kaczmarek
jeremy breuillard
Nicolas Hunstein
Matt Blenkinsop
Paul Derscheid
Tomas Cohen Arazi