Lets check DBIx's columns_info.
Test plan:
Try to blank an integer column and a string column. Verify results.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
(cherry picked from commit c0a1731715)
Signed-off-by: Paul Derscheid <paul.derscheid@lmscloud.de>
To test:
1. Set not-for-loan, withdrawn, and damaged statuses on some items
2. Try to edit only those items with the Batch item modification tool
3. Check the checkboxes to clear the withdrawn, not-for-loan, and
damaged statuses
4. Click Save
5. View the background job report
--> Note that it says the items could not be modified
6. Look at the items
--> The statuses have not been cleared
7. Apply patch and restart_all
8. Repeat steps 2-5
--> The background job report says the modifications were successful
9. View the items
--> The statuses have been cleared
Signed-off-by: David Flater <flaterdavid@gmail.com>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
(cherry picked from commit 341c93ee58)
Signed-off-by: Paul Derscheid <paul.derscheid@lmscloud.de>
In order to remove false positives with the QA script we should replace some tabs with spaces.
There are more but I wanted to make sure no regression would be
introduced
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@openfifth.co.uk>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
(cherry picked from commit 492e6814a1)
Signed-off-by: Paul Derscheid <paul.derscheid@lmscloud.de>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Andrew Fuerste Henry <andrew@bywatersolutions.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This change improves the validation of the report ID passed by the user.
Test plan:
0. Apply the patch
1. koha-plack --restart kohadev
2. Create a SQL report
3. Go to /cgi-bin/koha/tools/scheduler.pl
4. Add in a Time, Date, and Email
5. Choose your report from the list
6. Click "Save"
7. Note that your report is saved
Signed-off-by: Phil Ringnalda <phil@chetcolibrary.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This commit is generated using:
% perl misc/devel/tidy.pl
*within* ktd, to get the same version of perltidy than what will be used
by our CI (currently v20230309).
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
The fourth parameter is now removed and was never used.
Also replacing the 'both' interface by passing no interface to make
it consistent with call in additional-contents.
Resolving warn for empty interface or theme on Languages.pm L128.
Test plan:
Run t/db_dependent/Languages.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Currently the tool reports:
Incorrect not-for-loan values
Wrong place
Checked out
We should have:
Optional display of items w/o problems
Display of missing/lost items now marked found
TEST PLAN
1 - Mark an item as lost
2 - Go to tools->inventory
3 - Fill in the barcode list with the barcode of the item, notice there
is one checkbox in "Additional options"
4 - Submit -> there should be no result
5 - Apply patches and redo 1,2&3
6 - Notice there are now 3 checkboxes in "Additional options"
7 - Click on "Add lost items to the report"
8 - Submit -> there is now one line in the report with problem "Item was lost and is now marked as found"
9 - Go to tools->inventory
10 - Click on "Add lost items to the report"
11 - Submit -> there is no line in the report
12 - Go to tools->inventory
13 - Click on "Add items without problem to the report"
11 - Submit -> there is now line in the report with an empty problem
Signed-off-by: Mathieu Saby <mathsabypro@gmail.com>
Signed-off-by: Lisette Scheer <lisette@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Currently the tool reports:
Incorrect not-for-loan values
Wrong place
Checked out
We should have:
Optional display of items w/o problems
Display of missing/lost items now marked found
TEST PLAN
1 - Mark an item as lost
2 - Go to tools->inventory
3 - Fill in the barcode list with the barcode of the item, notice there
is one checkbox in "Additional options"
4 - Submit -> there should be no result
5 - Apply patches and redo 1,2&3
6 - Notice there are now 3 checkboxes in "Additional options"
7 - Click on "Add lost items to the report"
8 - Submit -> there is now one line in the report with problem "Item was lost and is now marked as found"
9 - Go to tools->inventory
10 - Click on "Add lost items to the report"
11 - Submit -> there is no line in the report
12 - Go to tools->inventory
13 - Click on "Add items without problem to the report"
11 - Submit -> there is now line in the report with an empty problem
Signed-off-by: Mathieu Saby <mathsabypro@gmail.com>
Signed-off-by: Lisette Scheer <lisette@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
To test:
1. Create an item give it a barcode like 'abc123';
2. Try creating a 2nd item with a barcode: 'ABC123', you get an error 'Error saving item: Barcode must be unique.'
3. Checkin the item 'ABC123', the 'abc123' item successfully checks in.
4. The case doesn't seem to matter elsewhere in Koha ( check-in, checkout, searching, batch tools )
5. Try the inventory tool and use 'ABC123'. The barcode is not found.
6. APPLY PATCH, restart_all
7. Try the inventory tool again with both 'abc123' and 'ABC123', they should now both work.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Most of the places where a "script_name" variable used it is not
strictly necessary. Because it is also used inconsistently, I think it's
better to simply remove the use of the variable where it isn't strictly
necessary.
This patch removes creation of the template variable from several
scripts and updates the corresponding template with the URL itself.
To test, apply the patch and restart services. Test the following pages,
including the various permutations where they are present, e.g. New,
Edit, Delete.
- Administration -> Cities and towns -> Search via the header search
form
- Administratoin -> Currencies and exchange rates -> Search via the
header search form
- Administration -> Desks
- Administration -> Budgets
- Administration -> Authority types
- Administration -> Authority types -> MARC structure -> Subfields
- Administration -> Classification configuration
- Administration -> MARC bibliographic framework
- Administration -> MARC bibliographic framework -> MARC structure ->
Subfields
- Administration -> Record matching rules
- Administration -> OAI repositories
- Administration -> Patron attribute types
- Administration -> System preferences -> Local use
- Administration -> Z39.50/SRU servers
- Acquisitions -> Vendor -> Contracts
- Acquisitions -> Vendor -> Basket -> Export as CSV
- Acquisitions -> Vendor -> Basket -> Edit basket
- Acquisitions -> Vendor -> Basket groups
- Tools -> Import patrons
- Tools -> Notices and slips
Sponsored-by: Athens County Public Libraries
Signed-off-by: Phil Ringnalda <phil@chetcolibrary.org>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This follow-up patch adds a bool type to modborrowers, so that the
options can be translated within the template files.
Signed-off-by: Brendan Lawlor <blawlor@clamsnet.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch adds protected status as a batch borrower modification
option, if the user performing the modification is a superlibrarian.
TO TEST:
a) login as a superlibrarian
b) attempt to batch modify these k.t.d user barcodes:
1) 23529000035676
2) 23529001000463
3) 23529000050113
c) notice that there is no protected option
d) APPLY PATCH
e) repeat step b
f) notice that protected is now an option
g) set all borrowers to protected (yes)
1) notice that the status has changed, in each individual user
record
h) set all borrowers to unprotected (no)
1) notice that the status has changed, in each individual user
record
i) set the proctedted status back to yes, but also set some other
random options (e.g. city to Cork)
1) notice that the city and protected status are both updated
j) use the disabled checkbox next to protected
1) notice that this always sets the protected status to zero
k) SIGN OFF
Signed-off-by: Catrina <catrina@bywatersolutions.com>
Signed-off-by: Brendan Lawlor <blawlor@clamsnet.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch ensures that barcodes uploaded as a file into batchMod are run through
any transformations to match the behaviour of barcodes entered in a list
To test:
1 - Edit BarcodeSeparators system preference to remove \s
2 - Install barcode transformer plugin:
https://github.com/bywatersolutions/koha-plugin-barcode-transformer/releases/tag/v1.2.0
3 - Configure the plguin:
item:
-
match: "^[A-Z]* \| "
search: "^[A-Z]* \| "
replace: ""
-
match: " \| .*$"
search: " \| .*$"
replace: ""
4 - Go to Cataloging->Batch item modification
5 - Enter a list of barcodes into the 'Scan one by one' box like:
ERR | 12345 | ERR
FOO | 23456 | FOO
BAR | 34567 | BAR
6 - Click 'Continue'
7 - Note the barcodes not found are:
12345
23456
34567
8 - Save the barcodes with extra text into a file
9 - Perform batch mod, supplying the barcodes via the file
10 - Note the barcodes not found are the original strings
11 - Apply patch, restart all
12 - Perform batch modification using file again
13 - Note the not found barcodes are the transformed version
14 - Sign off!
Signed-off-by: Brendan Lawlor <blawlor@clamsnet.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch resets @holiday_list to an empty array, to prevent holidays
to be accumulated in worker's memory.
If you added single holidays to library A then others to library B,
holidays from A were also added to B.
Test plan:
Go to /cgi-bin/koha/tools/holidays.pl
Define the holidays for Centerville
Select a date
To: another date (pick only 2 days to ease testing)
Set a title "cpl"
Tick "Holidays on a range"
Save
Define the holidays for Fairview
Select *another* date
To: another date (pick only 2 days to ease testing)
Set a title "fpl"
Tick "Holidays on a range"
Save
=> Without this patch Fairview has 4 days of holidays instead of 2
=> With this patch applied the dates you selected are considered
holidays for Fairview
Signed-off-by: Emmi Takkinen <emmi.takkinen@koha-suomi.fi>
Signed-off-by: Emily Lamancusa <emily.lamancusa@montgomerycountymd.gov>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
The system is vulnerable to Formula Injection attacks as the data
stored within the database and exported as CSV/Excel is not being
sanitized or validated against implanted formula payloads
This patch modifies all uses of Text::CSV and derived classes to pass
the "formula" parameter with value of "empty" which replaces formulas
by empty string.
Test Plan:
1) Apply this patch
2) For guided_reports.pl, attempt to export CSV where you've set a column to a formula somehow
( such as "=1+3" )
3) Export that CSV file
4) Note the formula has not been exported
5) Repeat this plan for the remaining scripts that export CSV files
where users can define the outputted data
Signed-off-by: Magnus Enger <magnus@libriotech.no>
Fixed two conflicts. I have tested that this works as advertised on:
- Reports (Download > Comma separated text (.csv)) [Text::CSV::Encoded]
- Circulation > Overdues > Download file of all overdues [Text::CSV_XS]
- misc/export_borrowers.pl [Text::CSV]
This covers all modules used, and both GUI and command line.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
[EDIT] Change none to empty in the commit message ! None is the default,
doing nothing. Empty clears the formulas.
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
We can now call metadata_record directly on the Koha::Biblio object.
This aptch updates all modules and controllers to use
Koha::Biblio->metadata_record directly where appropriate. The
exceptions are where we don't require any filtering or the filtering
makes sense to do after the initial fetch.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
To test:
1 - Define a patron attribute as repeatable
2 - Add multiple values to a patron (I used borrowernumber 5)
3 - Tools->Batch patron modification
4 - Modify the patron from step 1, selecting the attribute you created and checking the box to clear
5 - View the patron, they look correct
6 - Check the DB:
SELECT * FROM borrower_attributes WHERE borrowernumber=5;
7 - There is one blank value
8 - Apply patch
9 - Repeat batch modification
10 - Check the DB, no attribute!
11 - Test with multiple attributes in the batch modification and ensure only the correct one is removed
12 - Sign off
Signed-off-by: Phil Ringnalda <phil@chetcolibrary.org>
Signed-off-by: Emily Lamancusa <emily.lamancusa@montgomerycountymd.gov>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
With this patch you can write or delete circulation messages on the
batch patrons modification form
Test plan:
1)Go to Home > Tools > Batch patron modification
2)Write one or more card numbers to access the modification form
3)Notice the input you can interact with
4)Apply patch and repeat 1) & 2)
5)Notice the new input 'Message:' which appeared down the form
6)Write a message and choose a type (opac or intranet)
7)Save & notice the new 'Message' column filled up with what you wrote
before
8)To delete: back on the modification form - check the checkbox beside
the input - save again
Signed-off-by: Valerie Burnett <valerie@bywatersolutions.com>
Signed-off-by: George Williams <george@nekls.org>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
After you upload a file or textarea of barcodes to inventory, the next step is
a list of the things that were missing, with checkboxes to check when you find
them, and buttons to Mark seen, which send a POST to
/cgi-bin/koha/tools/ajax-inventory.pl without an op param (since it doesn't
have an $op) and without a csrf_token, so the POST fails with a 403.
Test plan:
1. Without the patch, Cataloging - Inventory - in Item location filters
set Library to Centerville, Shelving location to Audio visual, Collection
code to Reference, and in Optional filters for inventory list or comparing
barcodes set Last inventory date to today.
2. Click Submit, and you'll have a table of 23 items. Check the checkbox for
the first item, click Mark seen and continue
3. What was supposed to happen was that you would be taken to the next
page, but instead you are still in the same page, and if you had the
browser console open, you would have seen that you sent a POST to
ajax-inventory.pl, and got a 403 error in response
4. Apply patch, restart_all
5. Repeat step 1 and 2, this time getting to the second page. Check the
checkboxes for the last two items, and click Mark seen and quit
6. Repeat step 1 and click Submit. You should now have only 20 items, since
the three you checked now have a Last inventory date of today.
Yeah, when you did Mark seen and continue they ought to have been removed from
the list, I agree. I had to go back to 23.11.x and make sure that was really
how it was supposed to function, but that is the existing behavior. Even
though they get marked as seen, nothing changes about your list until you quit
and go back to it. Maybe because then something that wasn't on the current
page would have moved there. Another bug.
Sponsored-by: Chetco Community Public Library
Signed-off-by: Sonia Bouis <sonia.bouis@univ-lyon3.fr>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch switch the check in the script to 'cud-list' - we use the same form
submission if listing for preview or directly updating dates, so this may or may
not be a cud- action - assuming it is restores script functionality.
See bug 37941 for updating forms to not share actions
To test:
1 - Checkout some items to patrons of at least two libraries
2 - Tools -> Batch extend due dates
3 - Select nothing except 'preview' and submit
4 - Blank screen
5 - Apply patch, repeat
6 - It works!
7 - Filter by library and confirm it still works
8 - Sign off!
Signed-off-by: Janusz Kaczmarek <januszop@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
When a booking is cancelled, patron received an email based on specific
letter.
Test plan:
1) Create a letter with code "BOOKING_CANCELLATION" on "Notices and
slips" tool.
2) Add booking or go on item already booked in advance.
3) Cancel it
4) Verify in message_queue table directly or go on patron page and click
on "Notices" tab section.
Sponsored by: Association de Gestion des Œuvres Sociales d'Inria (AGOS)
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Just like with batch item modification, batch patron modification can accept
either a POST of a lot of data, which might be more than Apache's default
URL length limit, or a GET of a little data. Or at least it could, if both
the op 'cud-show' and the op 'show' were accepted. Show isn't doing any
creation or updating or deleting, it just has to be cud-show because it needs
to be able to accept large POSTs. So when it is only getting a little data, it
should be willing to take a GET with op=show just like batch item
modification does.
Test plan:
1. Without the patch, Tools - Patron lists - New patron list - give it a
name and Save
2. Type enough characters in the Patron search input to find a patron (I
like ace for poor often-used Henry Acevedo) and click on a patron in
the list of results
3. Click Add patrons
4. Click Patron lists, and in the Actions menu for your list, choose
Batch edit patrons. Note that the page that loads doesn't show any patrons
or UI to edit them, only a message about "No patron card numbers or
borrowernumbers given."
5. Apply patch, restart_all
6. Repeat step 4, but this time get a page with your patron listed, and a
form to change things about the patron record.
Sponsored-by: Chetco Community Public Library
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Since bug 37197 switched reports back to using a POST to send cardnumbers to
batch modification, we should also be using a single textarea rather than
multiple inputs.
Test plan:
1. Reports - Create from SQL - give it a name, and the SQL
select cardnumber from borrowers limit 3
2. Save report - Run report
3. Batch operations with 3 visible records - Batch patron modification
4. Verify that you have the same three cardnumbers in Batch patron modification
as were in the report.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This change validates the paths in datalink.txt/idlink.txt,
so that only images in the unpacked archive directory are allowed
Test plan:
0. Apply the patch
1. koha-plack --reload kohadev
2. Create a datalink.txt file with the following:
42,selfie.jpg
3. Create a jpeg at selfie.jpg
4. ZIP the datalink.txt and selfie.jpg files
5. Upload to the "Upload patron images" tool
(after enabling the "patronimages" system preference)
6. Note that the image uploads correctly
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 8fcb767fe2836c90ceacb5b5d8211524571eb8aa)
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 579c28c764257a250c12aa11207772c074c1335e)
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Test plan:
0. Apply patch and restart/reload Koha
1. Test that uploading a patron image still works, in single file format and as a zip
Work as suggested
Signed-off-by: Amit Gupta <amit.gupta@informaticsglobal.com>
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 9bc0521493fbe2f9fe0dde051d0b2f52c8a14a9a)
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
To Test
1. Create a file name for example: test.zip`curl xxxxtesting.informaticsglobal.com`.zip
where the domain is one you can watch the logs from.
2. Go to Tools and click on Upload patron images choose option zip file and upload the file.
3. Check /var/log/apache2/access.log and see the curl with the IP
"xx.xxx.xx.xxx - - [11/Jul/2024:23:10:33 +0530] "GET / HTTP/1.1" 200 267 "-" "curl/7.68.0"
4. Apply the patch
5. Repeat 2 and 3 step and check no error is coming for the Remote execution error.
6. Test uploading actual zip file and images still works.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 5c931e00f73e91467581fd29721e5af8d7fa98ab)
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
If a notice doesn't already have any data in it we weren't able to use
the object to lookup the sample.. with this patch we now always load the
samples if they exist for each installed and enabled language,
regardless of whether there's already a notice stored in that language.
Test plan
1. Install Spanish by running koha-translate --install es-ES from inside
the kohashell
2. restart all
3. Set TranslateNotices to Allow
4. Verify that the Spanish-language sample_notices.yml exists
5. Open a notice that has at least one Spanish default notice defined
6. Confirm you see the 'View default' button for the spanish notice and
that the displayed notice is indeed the spanish translation
Signed-off-by: Emily Lamancusa <emily.lamancusa@montgomerycountymd.gov>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch adds a modal to preview the sample notices in the UI and
allow replacing the template content with that content of that modal.
Test plan
1) Apply patches and restart plack (Or just use a sandbox)
2) Login to the staff client and navigate to 'Tools > Notices and Slips'
3) 'Edit' a notice.
4) Note the new 'View default' button on some notices where we ship a
default in the 'sample_notices' file.
5) Click the button to view the sample notice
6) Confirm 'Close' just closes the modal
7) Confirm 'Copy' copies the sample notice into the editor field
Signed-off-by: Emily Lamancusa <emily.lamancusa@montgomerycountymd.gov>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Test plan:
1. In Administration - Patron attribute types verify you have the default
SHOW_BCODE using the YES_NO authorized value
2. Tools - Batch patron modification, add a patron card number or
borrowernumber and continue
3. For Patron attribute select Show barcode on the summary screen item
listings, and note that you get a blank text input rather than a select
menu with Yes and No choices
4. Apply patch, restart_all
5. Repeat step 2 and 3, but note that you now get a Yes/No select menu
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Emily Lamancusa <emily.lamancusa@montgomerycountymd.gov>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Same change.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Koha::Objects depends on Koha::DateUtils, which depends on C4::Context,
which depends on Koha::Config::SysPrefs, which depends on Koha::Objects
Apart from the circular dependency, the dependency on C4::Context alone
is problematic as it loads a bunch of modules that are not needed at all
in Koha::Objects (YAML::XS and ZOOM for instance).
As Koha::Objects is used as a base for a lot of modules, we should take
care to only load the minimum required.
This patch removes uses of Koha::DateUtils from Koha::Objects.
It was only used in Koha::Objects::filter_by_last_update
filter_by_last_update now requires that the 'from' and 'to' parameters
must be DateTime objects. Previously it would also allow date and
datetime strings. This possibility was only used in two places:
* misc/cronjobs/cleanup_database.pl
* tools/cleanborrowers.pl
Now they call dt_from_string first and pass a DateTime object to
filter_by_last_update
Test plan:
1. Run `perl -cw Koha/Objects.pm`. It should only say:
"Koha/Objects.pm syntax OK" without warnings
2. Run `prove t/db_dependent/Koha/Objects.t`
3. Verify that misc/cronjobs/cleanup_database.pl works as before,
especially with the options --pseudo-transactions,
--pseudo-transactions-from and --pseudo-transactions-to
4. Go to Tools » Batch patron deletion and anonymization, check "Verify
you want to anonymize patron checkout history" and enter a date in
the text input below. Then click Next and verify that the correct
count of borrowers is shown. Click on the "Finish" button and verify
that the circulation history has been correctly anonymized
See also bug 36432
Signed-off-by: Tadeusz Sośnierz <tadeusz@sosnierz.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch adds the display of 'Default language' to the 'Default'
language in the notices editor tool.
This is so that librarians know which language they are expected to be
writing the notice in so we can remain consistent in both template and
include language used.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch ensures saving styles per notice still works as expected when the TranslateNotices system preference is enabled.
To test, enable the TranslateNotices system preference and attempt to save different CSS for each installed language for one notice. Confirm the correct CSS is saved for the correct language.
Confirm the CSS selector helpers are inserted into the textarea as expected.
Confirm the 'Apply format settings to all notices for this language' setting works, as in CSS is saved for all relevant language notices.
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Save format settings for an individual notice, or for all notices
This patch implements a single style field for a slip to allow for advanced CSS customisation of printed notices. There are links to insert selectors as helpers. Styles can be applied for an individual notice, or all notices.
To test:
1. Apply the patches, install database updates, update schema if needed, and restart services
2. Go to Tools -> Notices and slips
3. Edit any notice
4. Go to the Format tab
5. Confirm there is a textarea for CSS, and links to insert helpful selectors for IDs like #receipt and #slip
6. Add some CSS and confirm it saves.
7. Test that 'apply these settings to all notices' option works. Test the confirmation box appears when this is checked.
8. Add a new notice and confirm CSS settings save successfully
9. The subsequent patches have specific testing plans for each printable notice. For each, confirm that SlipCSS stylesheet changes are applied first. Specific notice styles should be applied last.
10. Test with a non-HTML notice as well, such as RECALL_REQUESTER_DET. Plain (non_HTML) notices have always come with <pre> tags around them so the text is formatted slightly differently but any CSS from SlipCSS or the notice Format should still hold.
Sponsored-by: Colorado Library Consortium
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
To test:
1. Create or modify an existing patron account so that they have a
value in their fax number field.
2. Go to Tools > Batch patron modification
1. Add the patron card number, or borrower number into the
modification tool and click on continue. There is no option for
modifying fax numbers, nor are fax numbers visible in the
modification table.
3. Apply the patch and restart_all
4. Repeat step 2
1. A column for ‘Fax’ is now visible after ‘Other phone’
2. Test the ‘Fax’ field by clearing out the field with the checkbox.
‘Checking the box right next to the label will disable the entry
and delete the values of that field on all selected patrons.’
3. Test the ‘Fax’ field by updating the value with a new number
5. Sign off and have a wonderful day :)
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
To test:
1. Go to Tools > Notices and slips
2. Pick any notice and try to copy it to another library using the 'Copy notice' column.
3. You are redirected to a blank screen and if you go back to the Notices and slips page the notice has not been copied.
4. APPLY PATCH
5. Try steps 1 - 3 again, but this time you should be correctly directed.
Signed-off-by: Roman Dolny <roman.dolny@jezuici.pl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
It's never used in the template anyway but for consistency it would be better to use "show" (it's not CUD)
No change expected.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
If the user unchecks the skip checkbox (on by default), we must
make sure that order cancellation is done in background job.
Test plan:
Pick two biblios. One has linked open orders, the other not.
Go to batch delete records. Select 'Enter list of numbers'.
Enter both biblio numbers and check that only one is used on the
follow-up form.
Run the deletion without the skip open orders and verify
that linked order line is cancelled.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Test Plan:
1) Test importing a patron with the "from the current membership expiry date" option,
note it does not work
2) Apply this patch
3) Restart all the things!
4) Re-test, note the expiration was renewed from the patron's current
expiration date!
Signed-off-by: David Nind <david@davidnind.com>
Rebased-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Allow both $op eq "show" and "cud-show".
We need to keep the POST when we upload a file, but we can simply allow
GET with "show".
Test plan:
Go to the biblio detail page, select an item and test both tools via the links
"Delete selected items" and "Modify selected items"
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Replacing a FIXME by TODO along the way.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
We can use biblio.holds.count instead.
The main idea here is to make sure we are passing a Koha::Biblio object
as 'biblio' to all the templates including biblio-view-menu.inc
Test plan:
1. Go to the biblio detail view, click on the different entries in the menu
on the left. Confirm that the "Holds" tab always has the correct number
of Holds display in the parenthesis.
2. Run a search and confirm that the number of holds are still displayed
for each result.
QA:
git grep biblio-view-menu.inc
notice the tt list, open the corresponding perl controllers and confirm
that 'biblio' is passed and that it is a Koha::Biblio object.
The only missing place I found was in viewlog.
Note that we are not removing the TT method yet, we are marking it as
deprecated and also display a warning during the update DB process in
case one of the notice templates is using it.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Marcel de Rooy
Emily Lamancusa
Jonathan Druart
Lucas Gass
David Gustafsson
David Cook
Koha Development Team
Baptiste Wojtkowski
Owen Leonard
Jake Deery
Nick Clemens
Kyle M Hall
Martin Renvoize
jeremy breuillard
Phil Ringnalda
Thibaud Guillot
Chris Cormack
Amit Gupta
Julian Maurice
Aleisha Amohia
Laura Escamilla
Tomas Cohen Arazi