This patch adds a new rule for itemtypes to allow/prevent filling other holds on a bibliographic record
The rule will obey ReservesControlBranch for determining the rules
To test:
1 - Apply patches
2 - Setup/choose 2 item types in Administration->Item types
3 - In Administration -> Circulation and fine rules scroll to the bottom
4 - Set one item type to "Fill other holds on record" = 'Yes' and the other to 'No'
5 - Place a next available hold on the record
6 - Checkout the 'Yes' item type to the patron
7 - Their hold should fill
8 - Check in the items
9 - Place a next available hold on the record
10 - Checkout the 'No' itemtype to the patron
11 - Their hold should not be filled
12 - Check in the item and confirm the hold
13 - Checkout the itme to the patron, the hold fills
NOTE: While seemingly counter intuitive, the rule controls whether a hold NOT tied to this item will fill
Confirming the hold adds an itemnumber to the hold. In most cases, these items will not be holdable, so won't trigger at checkin
14 - Set a rule for the patrons branch to No and set system preference ReservesControlBranch to 'Patrons library'
15 - repeat 5&6
16 - The hold should not fill
17 - Change reserves control branch to items home library
18 - checkin /checkout the yes item type
19 - The hold should fill
Signed-off-by: Andrew Auld <andrew.auld@openfifth.co.uk>
Signed-off-by: Emily Lamancusa <emily.lamancusa@montgomerycountymd.gov>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Sponsored-by: The Main Library Alliance <https://www.mainlib.org/>
Signed-off-by: Trevor Diamond <trevor.diamond@mainlib.org>
Signed-off-by: Martin Renvoize <martin.renvoize@openfifth.co.uk>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This commit integrates hold fee configuration into the main circulation
rules system, providing granular control over hold fees based on patron
category, item type, and branch combinations.
Changes:
- Add hold_fee as a new circulation rule type with full scope support
- Remove deprecated reservefee column mapping from Koha::Patron::Category
- Integrate hold fee input into the circulation rules admin interface
- Add hold fee column to the main circulation rules matrix
- Enable proper rule hierarchy resolution for hold fees
Hold fees can now be configured at multiple levels with automatic
fallback handling following standard circulation rule patterns.
Sponsored-by: OpenFifth <https://openfifth.co.uk>
Signed-off-by: Jackie Usher <jackie.usher@westsussex.gov.uk>
Signed-off-by: Tomás Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Brendan Lawlor <blawlor@clamsnet.org>
Signed-off-by: Martin Renvoize <martin.renvoize@openfifth.co.uk>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Sponsored-by: Glasgow Colleges Library Group <https://library.cityofglasgowcollege.ac.uk>
Signed-off-by: George Harkins <George.Harkins@cityofglasgowcollege.ac.uk>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This commit is generated using:
% perl misc/devel/tidy.pl
*within* ktd, to get the same version of perltidy than what will be used
by our CI (currently v20230309).
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Move get_effective_expire_reserves_charge as a new method
in Koha::CirculationRules to retrieve the effective value of the rule,
which means it will get the value from existing circulation rule and
if it doesn't exist or set to undefined it will get the default
value from the preferences.
Also added tests for this logic.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
The tests can go where the existing cancellation charge tests are.
If we define the default rule we do not need to delete all circulation rules
as the itemtypes and branches are all created for the tests
The rule should not be saved if blank, this allows simplifying the logic
when getting the charge
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Add a feature that allows to define ExpireReservesMaxPickUpDelayCharge
in circulation rules per specific items/patron categories.
When value not found in circulation rules it uses global
ExpireReservesMaxPickUpDelayCharge, as it was before this smart-rules
feature was introduced.
To check the feature after applying the patch:
1) Go to /cgi-bin/koha/admin/preferences.pl and set
ExpireReservesMaxPickUpDelay to allow.
1) Go to /cgi-bin/koha/admin/smart-rules.pl circulation rules table
and notice the newly added "Expire reserve charge" row.
2) In that row add numerical values to type/patron categories
that you will be using later to test this feature.
3) Prepare an item for our next step, pick a biblio that has item
with the same item type you altered in smart rules and check it out.
3) Place a hold on that item and set the expiration date as the
next day.
4) Check in it after that.
5) Do SQL request to change expiration date manually to "yesterday":
in "reserves" table, find the id of the hold that you placed and
"UPDATE reserves SET `expirationdate`='2020-07-19' WHERE
`reserve_id`=329;"
Or alternatively:
5) Wait for tomorrow, change server time or invent a time machine.
6) Run cancel_expired_holds.pl cron job.
7) Check that patron got charged in "accounting" left tab and
"transactions" upper tab: your patron should have debt of that amount
of fee you assigned in that rule
(/cgi-bin/koha/members/boraccount.pl?borrowernumber=...YourPatronID...)
8) You can repeat this with other rules and different
numbers/biblio/item types to check that different fees apply according
to smart rules.
9) If there's no matching smart rule or smart rule have an empty
string as a fee - global ExpireReservesMaxPickUpDelayCharge variable
value will be used.
10) But in case if matching rule has zero ("0") as a value - that
allows to have no-fee smart-rule results, as a feature.
IMPORTANT:
Smart-rules filters only applied to item-level holds when item-type
for items is known. If there's biblio-level hold, in that case global
ExpireReservesMaxPickUpDelayCharge value will be used).
Mentored-by: Andrew Nugged <nugged@gmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
So that pickup delay can have a different value per patron category,
item type or branch.
To test:
1) Update database, restart services
2) Set ReservesMaxPickUpDelay syspref (if not already set)
3) Edit your circulation rules and set a value under 'Holds pickup
period (day) that is DIFFERENT from ReservesMaxPickUpDelay. Set a few
different numbers for different branches as well.
4) Place a hold on a biblio from the staff client.
5) Check in an item from that biblio and confirm the hold as waiting
6) Confirm the expiration date is calculated using the 'Holds pickup
period' value instead of the ReservesMaxPickUpDelay syspref
7) Revert the waiting status and delete the hold
8) Re-place the hold on the biblio on the OPAC. Notice that when you
change the pick up location, the number of days in the pickup message
below the dropdown changes based on the circ rules.
9) Create a holiday with a date that will overlap with the 'Holds pickup
period'
10) Check in an item from that biblio and confirm the hold as waiting
11) Confirm the expiration date is calculated using the 'Holds pickup
period' value AND considers the special holiday
12) Confirm tests pass t/db_dependent/Holds/WaitingReserves.t
13) Test Talking Tech:
13a) Enable TalkingTechItivaPhoneNotification
13b) Go to Tools -> Notices & slips. Add content to the HOLD phone
(itiva) notice.
13c) In your terminal, run perl
/path/to/koha/misc/cronjobs/thirdparty/TalkingTech_itiva_outbound.pl -o
~/itiva.tmp -w 0 --type=RESERVE
Sponsored-by: Catalyst IT
Signed-off-by: Emmi Takkinen <emmi.takkinen@koha-suomi.fi>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kelly <kelly@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kelly <kelly@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Andrew Fuerste-Henry <andrewfh@dubcolib.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The logic introducing the can_be_blank check into the monetary decimal
format check was flawed and meant we were no longer checking decimal
formatting in the majority of cases. This patch updates that so we pass
the unit tests and correctly check any value passed that's not an empty
string.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch makes the code not require two decimal digits, as the main
intention here is to forbid (locale) formatted strings to reach the DB.
The number of digits we support needs to be discussed on its own bug,
and a centralized check implemented.
This patch fixes tests:
prove t/db_dependent/Circulation.t
t/db_dependent/Circulation.t .. 1/67 Exception 'Koha::Exceptions::CirculationRule::NotDecimal' thrown 'The circulation rule expected a decimal value' with name => fine, value => 0.1
t/db_dependent/Circulation.t .. Dubious, test returned 11 (wstat 2816, 0xb00)
Failed 53/67 subtests
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
While testing this bug I found Circulation.t was failing, but the
exception doesn't actually display anything useful in terms of helping
debug what's going on.
This patch makes it add the rule_name and rule_value to the message.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch marks the 2 missing monetary values for recal over due fines
and article request fees as monetary.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch moves the defintion of monetary rule type into the rule kinds
hash.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
When currency format is set on FR commas are decimals separators
but when cron like fines.pl try to calculate fines it's fails due to
this format.
I changed this behavior by targetted 'fine' and 'overduefinescap' in
circulation_rules.rule_name to unformat them when we save them.
This also fix the display in smart_rules table (before with commas price
was not good displayed - without decimals)
Test Plan :
1) Set your currency format on 'FR' and 'fine' OR/AND 'overduefinescap'
with commas
2) Be sure to have some patron overdues
3) Run ~/misc/cronjobs/fines.pl with args to find overdues
4) See an error like 'isn't numeric in substraction[..] or gt > [...]'
5) Run updatedatabase script (it will replace commas in your rules
changed in step 1) )
6) Repeat step 3 and see that everything was going "fine" (🎉)
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The code for get_processingreturn_policy was very similar to
get_lostreturn_policy. Combining the two methods allows for use of
get_effective_rules which uses get_effective_rule_value which is cached.
This should reduce lines of code and improve performance
Tests updated and adjusted as well
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
* Makes sure the system preference is added with INSERT IGNORE
* Some smaller fixes/additions to the POD of get_return_branch_policy
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
1) Apply this patch
2) Run updatedatabase.pl
3) Verify CircControlReturnsBranch is set to home library by default
4) Set a Return policy for Branch A to "Item returns home" ( homebranch )
5) Set a Return polity for Branch B to "Item returns to issuing library" ( holdingbranch )
6) Set a Return polity for Branch C to "Item floats" ( noreturn )
7) Create an item with homebranch of Branch A, holding branch of branch B
8) Log in as Branch C
9) Set CircControlReturnsBranch to "the library the item is currently held by"
10) Check the item in, note it should be returned to the holding library
11) Set CircControlReturnsBranch to "the library the item is owned by"
12) Check the item in, note it should be returned to the home library
13) Set CircControlReturnsBranch to "the library you are logged in at"
14) Check the item in, note it should float
Signed-off-by: Andrew Fuerste-Henry <andrewfh@dubcolib.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds handling for the waiting_hold_cancellation circulation
rule. It is set no 'No' by default in the atomic update, if not
previously set.
Handling in the rules editor is added, in its own section.
To test:
1. Apply this patch
2. Run:
$ updatedatabase
=> SUCCESS: All good
3. Verify that the syspref is set:
$ koha-mysql kohadev
> SELECT * FROM circulation_rules WHERE rule_name='waiting_hold_cancellation';
=> SUCCESS: Set to 0
4. Play with the rules editor, changing things back and forth, things
should work, including library-specific and global/defualt settings.
=> SUCCESS: It works
=> SUCCESS: Texts are idiomatic
5. Sign off :-D
Sponsored-by: Montgomery County Public Libraries
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
We shouldn't flush L1 cache completely, only the values related to the
circulation rules.
It is not correct to update the value of the value we are currently
setting (because of the inheritance concept of the circ rules).
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
After Bug 18936, in test suite, there is still t/db_dependent/Koha/IssuingRules.t and t/db_dependent/Koha/IssuingRules/
This patch moves IssuingRules.t inside CirculationRules.t and renames dir t/db_dependent/Koha/IssuingRules.
And adds DB transation in each first-level subtest.
Also renames in :
use constant GUESSED_ITEMTYPES_KEY => 'Koha_IssuingRules_last_guess';
Test plan :
Run prove t/db_dependent/Koha/CirculationRules.t
prove t/db_dependent/Koha/CirculationRules/*
prove t/db_dependent/Circulation/maxsuspensiondays.t
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch adds a new circulation rule: article requests fee.
It can be set per library and category.
To test:
1. Try setting sdifferent numeric values, change, and delete them
=> SUCCESS: Things work as expected
2. Make sure rules are loaded correctly when re-entering the circ rules
page
=> SUCCESS: All good
3. Verify the data on the DB is stored as it should on each of your
tests:
$ koha-mysql kohadev
> SELECT * FROM circulation_rules \
WHERE rule_name='article_request_fee';
=> SUCCESS: All good (remember NULL => 'All' in the UI)
4. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch adds 'can_be_blank => 0' for the rentaldiscount rule to prevent
storing blank values in the database
Additionally, if there is no charge we do not need to check for a discount
and can simply return
To test:
1 - Set rental discount to "" to a rule in circulation rules
2 - Checkout an item that will follow this rule
3 - Check the intranet log:
[WARN] Argument "" isn't numeric in subtraction (-) at /kohadevbox/koha/C4/Circulation.pm line 3385.
4 - Apply patch and restart all
5 - Update database
6 - Set the rule to "" again
7 - Check the DB, no rule is stored
SELECT * FROM circulation_rules WHERE rule_name = 'rentaldiscount';
8 - Checkout the item again
9 - No warns in log
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
On bug 17591 we discovered that there was something weird going on with
the way we export and use subroutines/modules.
This patch tries to standardize our EXPORT to use EXPORT_OK only.
That way we will need to explicitely define the subroutine we want to
use from a module.
This patch is a squashed version of:
Bug 17600: After export.pl
Bug 17600: After perlimport
Bug 17600: Manual changes
Bug 17600: Other manual changes after second perlimports run
Bug 17600: Fix tests
And a lot of other manual changes.
export.pl is a dirty script that can be found on bug 17600.
"perlimport" is:
git clone https://github.com/oalders/App-perlimports.git
cd App-perlimports/
cpanm --installdeps .
export PERL5LIB="$PERL5LIB:/kohadevbox/koha/App-perlimports/lib"
find . \( -name "*.pl" -o -name "*.pm" \) -exec perl App-perlimports/script/perlimports --inplace-edit --no-preserve-unused --filename {} \;
The ideas of this patch are to:
* use EXPORT_OK instead of EXPORT
* perltidy the EXPORT_OK list
* remove '&' before the subroutine names
* remove some uneeded use statements
* explicitely import the subroutines we need within the controllers or
modules
Note that the private subroutines (starting with _) should not be
exported (and not used from outside of the module except from tests).
EXPORT vs EXPORT_OK (from
https://www.thegeekstuff.com/2010/06/perl-exporter-examples/)
"""
Export allows to export the functions and variables of modules to user’s namespace using the standard import method. This way, we don’t need to create the objects for the modules to access it’s members.
@EXPORT and @EXPORT_OK are the two main variables used during export operation.
@EXPORT contains list of symbols (subroutines and variables) of the module to be exported into the caller namespace.
@EXPORT_OK does export of symbols on demand basis.
"""
If this patch caused a conflict with a patch you wrote prior to its
push:
* Make sure you are not reintroducing a "use" statement that has been
removed
* "$subroutine" is not exported by the C4::$MODULE module
means that you need to add the subroutine to the @EXPORT_OK list
* Bareword "$subroutine" not allowed while "strict subs"
means that you didn't imported the subroutine from the module:
- use $MODULE qw( $subroutine list );
You can also use the fully qualified namespace: C4::$MODULE::$subroutine
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds support for unseen renewals.
Here we retrofit knowledge of unseen renewals and add the display of unseen
renewal counts and warnings, in addition to adding the ability to
specify a renewal as being "unseen".
The functionality added here is goverened by the UnseenRenewals syspref.
Signed-off-by: Sally Healey <sally.Healey@cheshirewestandchester.gov.uk>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
To test:
1) Apply patch, update database, restart services
2) Enable decreaseLoanHighHolds sysprefs if not already active
3) Go to circulation rules and set a value under 'Decrease loan holds
(day)' that is DIFFERENT from decreaseLoanHighHoldsDuration
4) Check out an item with holds and confirm that the value from the rule
is used instead of the system preference
5) Confirm tests pass before and after the patch
t/db_dependent/DecreaseLoanHighHolds.t
Sponsored-by: Catalyst IT
Signed-off-by: Lisette Scheer <lisetteslatah@gmail.com>
Signed-off-by: Henry Bolshaw <bolshawh@parliament.uk>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds handing for the new values available for the lostreturn
policy settings.
* undef - Do nothing, leave fees and fines as they were at the point of
lose.
* refund - Refund the lost item fee only
* charge - Refund the lost item fee and charge a fresh overdue fine
dated for a return on the date the item is 'found'
* restore - Refund the lost item fee and restore the original overdue
fine (dated for a 'return' on the date the item was 'lost'
Test plan
1/ apply patch
2/ updatedatabase, restart_all
3/ verify finesmode and CalculateFinesOnReturn and WhenLostChargeReplacementFee are on
4/ verify WhenLostForgiveFine is set to "Forgive"
5/ verify circ rules include fines
6/ set Default lost item fee refund on return policy to "Refund lost item charge"
7/ create 4 overdue checkouts that will incur fines
8/ run fines.pl
9/ confirm 4 items checked out with accruing fines
10/ confirm all 4 items have a replacement price
Item 1
11/ mark the first item lost
12/ verify that fine is gone and lost fee has been charged
13/ check item in
14/ verify that lost fee is gone and overdue charge has not returned
Item 2
15/ set Default lost item fee refund on return policy to "Refund lost item charge and charge new overdue fine"
16/ mark second item lost
17/ verify that fine is gone and lost fee has been charged
18/ check item in
19/ verify that lost fee is gone and a new overdue charge has been made
Item 3
20/ set Default lost item fee refund on return policy to "Refund lost item charge and restore overdue fine"
21/ mark third item lost
22/ verify that fine is gone and lost fee has been charged
23/ check item in
24/ verify that lost fee is gone and the old overdue charge has been restored
Item 4
25/ set Default lost item fee refund on return policy to "Leave lost item charge"
26/ mark fourth item lost
27/ verify that fine is gone and lost fee has been charged
28/ check item in
29/ verify that lost fee remains and the overdue charge is still gone
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Currently, the 'Default checkout, hold, and return policy' have a conditional to blank
'holdallowed' when not set, but other rules don't get the same treatment
This patch uses the existing hash that controls the scope of rules and adds a
new parameter 'can_be_blank' Default is assumed to be true, can_be_blank, but if set to '0' then
blank rule values will not be save to the database
To test:
0 - Set CircControl to 'the library the item is from'
1 - Goto to Admin -> Circulation and fines rules and select a library
2 - Under "Default checkout, hold, and return policy" set:
Total current checkouts allowed: 1
Hold policy: Not set
Hold pickup library match: Not set
Return policy: Not set
3 - Save the rule
4 - Check the DB
SELECT * FROM circulation_rules WHERE branchcode = 'BRANCHCODE'
using the branchcode for the library you chode
5 - Note returnbranch, and hold_fulfillment_policy rules exist with blank value
6 - Set 'All libraries'->'Default checkout, hold and return policy'->'Item floats'
7 - Checkin an item from the library with blank rules at another library
8 - It returns home rather than floating
9 - Apply patch and restart all the things
10 - Reload the page and save the rules as before
11 - Check the DB and note the rules no longer exist
12 - Check in the item, it floats!
13 - prove -v t/db_dependent/Koha/CirculationRules.t
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds a new get_lostreturn_policy method to
Koha::CirculationRules which returns a boolean to the caller which
denotes whether a refund should be applied or not on the return of
a lost item.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch changes the new circulation rule that's introduced from
useDaysMode to daysmode to improve consistency with other rule names.
We also update the accessors and code using them to reflect the new
term.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Sponsored-by: Institute of Technology Carlow
Signed-off-by: Simon Perry <simon.perry@itcarlow.ie>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Moving the useDaysMode system preference to a circulation rule will add
much more flexibility in the calculation of the due date.
The initial request was to make hourly loan returned on closed when
(when checked out on the same close day).
To do so we do not want to take into account the calendar.
However the calendar need to be taken into account for other loan item types.
Other scenarios are possible, for instance depending on the branch.
This patchset will add a new "Days mode" column (next to "Loan period")
to the circulation rules page, with the different values of the
"useDaysMode" system preference + a "default" value, to default to the
system preference value.
Test plan:
- Define a long loan item type (like 10 days) that will use the calendar
(or default to the pref value, if the pref is not set to "ignore the
calendar")
- and a hourly loan (like 2 hours) that will ignore the calendar
- Create items with those item types
- Mark today as a closed day
- Check the items out
=> The hourly loan is due the same day
=> The other loan is due on an open day
QA note:
There is the need to force the "days_mode" option when Koha::Calendar is
initiated for the due date calculation. To make sure devs will not
forget it, the methods that need have it defined will throw an
exception.
Sponsored-by: Institute of Technology Carlow
Signed-off-by: Simon Perry <simon.perry@itcarlow.ie>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Bug 9978 should have fixed them all, but some were missing.
We want all the license statements part of Koha to be identical, and
using the GPLv3 statement.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Nick Clemens
Martin Renvoize
Tomas Cohen Arazi
Katrin Fischer
Martin Renvoize
Koha Development Team
Petro Vashchuk
Aleisha Amohia
Pedro Amorim
Kyle M Hall
Thibaud Guillot
Katrin Fischer
Jonathan Druart
Fridolin Somers
Andrew Isherwood