It is no longer necessary.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
$ prove t/db_dependent/ClassSource.t
t/db_dependent/ClassSource.t .. 3/24 attempting to use non-existent class sorting routine routine1
t/db_dependent/ClassSource.t .. ok
All tests successful.
Files=1, Tests=24, 1 wallclock secs ( 0.02 usr 0.00 sys + 0.66 cusr 0.02 csys = 0.70 CPU)
Result: PASS
The above warning might be scary to those unfamiliar with the test.
Add a test to catch the warning.
TEST PLAN
---------
1) prove t/db_dependent/ClassSource.t
-- as above
2) apply patch
3) prove t/db_dependent/ClassSource.t
-- no message
4) prove -v t/db_dependent/ClassSource.t
-- test 13 is the new test
5) run koha qa test tools
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Workas as advertised
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
By properly defining a opachtdocs (intranethtdocs was done too)
in the mock function, uninitialized variable warnings are
eliminated. Given that we can check if $KOHA_CONF is defined or
not, we can catch the warning as part of testing, so the output
of the test is cleaner.
TEST PLAN
---------
1) unset KOHA_CONF
2) prove t/db_dependent/SuggestionEngine_ExplodedTerms.t
-- lots of noise
3) apply patch
4) prove t/db_dependent/SuggestionEngine_ExplodedTerms.t
-- no noise
5) prove -v t/db_dependent/SuggestionEngine_ExplodedTerms.t
-- see the warnings were caught and not just ignored.
6) run koha qa test tools
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
No warnings. Works as advertised
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Instead of relying on existing data, we use new TestBuilder recs.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
No need to bail out, if we are using TestBuilder.
Somehow, this test passes with me if we add a new record, and if
we do not, it fails (using BK as the first itemtype with notforloan
is 0).
Looking further, we should imo remove the Koha::ItemTypes searches
here and not depend on existing data. Just add some item types.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Looking at commit aafe73eefb
Bug 14828: Use Koha::ItemType[s] everywhere C4::ItemType was used
-my @item_types = C4::ItemType->all;
-my @for_loan = grep { $_->{notforloan} == 0 } @item_types
- or BAIL_OUT("No adequate itemtype");
-my $itemtype = $for_loan[0]->{itemtype};
+my $itemtype = Koha::ItemTypes->search({ notforloan => 1 })->next;
+$itemtype or BAIL_OUT("No adequate itemtype"); #FIXME Should be $itemtype = $itemtype->itemtype
It seems that the tests expect itemtypes for loan.
Test plan:
prove t/db_dependent/HoldsQueue.t
should still return green
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as advertised. No qa test tool errors
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Adding follow-up.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
The marc subfield structure is currently cached using a global variable
of C4::Context. The infos are retrieved every time a new context is
created.
This patch suggests to use Koha::Cache instead.
To achieve this goal, a new subroutine is created
C4::Biblio::GetMarcSubfieldStructure, it will be called from code which
needs to get the marc subfield structure. GetMarcFromKohaField,
GetMarcSubfieldStructureFromKohaField, TransformKohaToMarc and
_get_inverted_marc_field_map are modified accordingly and the cache is cleared
when the table is updated (from the 3 pl scripts modified by this patch).
The caching done in C4::Context (marcfromkohafield) is removed.
Test plan:
Play with the marc subfield structure (in the administration module),
then add and edit records and make sure everything went fine.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Everything works as expected on my functional tests. I'm really happy to see the
patch introduces relevant tests for previously untested functions.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Broust <jean-manuel.broust@univ-lyon2.fr>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch answers Jonathan's request to simplify this patchset a bit.
It removes the need for the .sql file, as _default_rule now defaults to
a fixed value (1, which was set by the removed .sql file).
This allowed to remove the overloaded ->delete method.
The tests have been adjusted to reflect this changes, including tests for
the new 'default'-if-absent situation.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jason Robb <jrobb@sekls.org>
Signed-off-by: Jennifer Schmidt <jschmidt@switchinc.org>
Signed-off-by: Margaret Thrasher <p.thrasher@dover.nh.gov>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
This patch introduces unit tests for the feature.
To test:
- Have all patches from this bug applied
- Run:
$ prove -v t/db_dependent/RefundLostItemFeeRule.t
=> SUCCESS: All tests pass!
Sponsored-by: DoverNet
Sponsored-by: South-East Kansas Library System
Sponsored-by: SWITCH Library Consortium
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jason Robb <jrobb@sekls.org>
Signed-off-by: Jennifer Schmidt <jschmidt@switchinc.org>
Signed-off-by: Margaret Thrasher <p.thrasher@dover.nh.gov>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
Testplan:
- Apply patch
- Run t/Number/Price.t
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
s/sitemaper/sitemapper/
Test plan:
Run t/db_dependent/Sitemapper.t
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
$category was a categorycode, to help the readability it's better to
name it $categorycode or assign a Category to $category
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
There is actually no need to use the hardcoded patron category S in
this test.
Test plan:
Run t/db_dependent/Holds.t.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Test passes OK
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Test t/db_dependent/Accounts.t:
This test created a MPL branch, but did not use it any more.
Test t/db_dependent/Items/AutomaticItemModificationByAge.t:
This test still used CPL/MPL branches. Now it uses two new branches.
Test plan:
[1] Run t/db_dependent/Accounts.t.
[2] Run t/db_dependent/Items/AutomaticItemModificationByAge.t.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Both tests pass OK
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
The current test had no warnings, when you have no MPL branch, and only
catches the warn from the second build on line 57. If you do have MPL,
a warning comes from line 56.
This patch fixes it by removing MPL from the test. A new branch is created
first and then we try to create it again.
Test plan:
Run the test.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
When testing a wrong case in TestBuilder.t, two warns show up.
We can catch them with warning_like.
Test plan:
Run t/db_dependent/TestBuilder.t
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Trivial changes that speak for themselves..
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
The current test assumes that GetPlugins will return the test plugin
as the first one in the array. This is not correct.
This patch adjusts the test to a grep.
Test plan:
Run the test.
Bonus: Add additional plugins. Run the test again.
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
In order to verify if the delete now really works, we add one test
in Plugins.t.
Test plan:
[1] Run the test.
[2] Bonus: Comment line 63 in Plugins.t where delete is called.
Run the test again. It should fail now.
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
If you run Plugin.t, the above table will still be present (when you
did not enable UseKohaPlugins). This would trigger a warning when
running the test a second time.
Why? The uninstall call does its work not completely due to a small
inconsistency in Koha::Plugins::Handler::delete when calling run
without the enable_plugins parameter.
This patch resolves that inconsistency and also removes an unneeded skip
in Plugin.t in case the KitchenSink module already exists.
Note: This is a small fix. But I wonder if the Handler routines run and
delete should not have been implemented in Koha::Plugins::Base.
Also note that plugins/plugins-uninstall.pl will not be affacted by this
change, since it checks whether the pref is enabled before calling the
delete method.
Test plan:
[1] Do not yet install this patch.
[2] Verify that plugins are enabled in koha-conf.xml.
[3] Disable UseKohaPlugins in System Preferences!
[4] Run t/db_dependent/Plugins.t.
[5] Verify that table koha_plugin_com_bywatersolutions_kitchensink_mytable
still exists. (It should have been deleted.) Remove it manually.
[6] Apply this patch.
[7] Run the test again.
[8] Verify that the table does not exist.
[9] Run the test again (without warnings).
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
On running all Items-related tests some useless diag showed up. Removing it.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
With the global %default_values_for_mod_from_marc variable, the changes
made to the marc_subfield_structure table and especially the links
between MARC and DB fields are not safe and might be outdated (if a
field is linked/unlinked)
Test plan:
Under Plack:
- Link the barcode field, edit a record and set a barcode.
- Remove the mapping for the barcode field and then update again the
barcode of the record.
The items.barcode DB field must not have been updated.
Without this patch, the field should have been updated.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Added a new sub to Serials.pm to be able to get serials with their statuses.
Now the sub ModSerialStatus checks for other serials with an "expected" status before doing anything.
Also modified Serials.t to be able to test those changes.
Test Plan
1) Apply patch
2) Run ./t/db_dependent/Serials.t
3) Validate that there are no errors
4) Go on "Serial collection information" page for a serial of your choice
5) Click on "Generate next"
6) Change the status of the original serial from "late" to "expected"
7) Change the newly generated serial from "expected" to "delete"
8) Validate that there are no new serials created by instruction 7 and that the serial was deleted
9) Run ./t/db_dependent/Serials.t
With QA Fixes
- Use the constant instead of the code (1 vs EXPECTED)
- Avoid interpolation in query
- use selectall_arrayref instead of fetchall_arrayref
Signed-off-by: Liz Rea <liz@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
When we mock the preferences completely now, we do not need
db access anymore.
Test plan:
Run the test without exporting KOHA_CONF.
The test passes with some warns about koha-conf.xml.
If you point KOHA_CONF to etc/koha-conf.xml, you have no warns.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Initialize file level lexicals each call. Do not call _initialize
outside the module.
Adjust test by mocking preferences.
Test plan:
Run t/db_dependent/External_BakerTaylor.t.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Tested module with trivial script under Plack/memcached by toggling
the associated preferences.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Before this patch, the suspend step triggers a warn from Koha::Hold.
Now we catch it.
Test plan:
Run the test. Do not see the warning about unable to suspend.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
NOTE: Nice clean up!
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 14507 introduced the use of checkpw in C4::SIP::ILS::Patron so that
non-Koha internal authentication processes would be able to function via
SIP ( LDAP et al ).
The problem is that checkpw changes the userenv to that of the patron!
This is not usually an issue in Koha because most of the time that
patron running through checkpw is the one to be logged in.
Aside from SIP2 the only other area where this may be an issue is in SCO
when using SelfCheckoutByLogin.
Test Plan:
1) On master, check out an item to a patron via SIP2
2) Note the checkout lists the item as having been checked out
from the patron's home library not matter which library is was
supposed to be checked out from.
3) Apply this patch
4) Re-checkout the item
5) The item should now be checked out as if it was checked out from
the library as defined in the SIP configuration file.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Test plan:
prove t/OpenLibrarySearch.t
should return green even if you are offline
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch fixes test breakage introduced by the patch for bug 16088,
which added caching of getlanguages(). Upon inspection, it looks like
the patch for 16088 does not introduce a regression on bug 10560,
so this patch adds a couple cache-clearings.
To test
-------
[1] Verify that t/Languages.t passes.
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Caused by bug 16442.
Now we need to mock the marcflavour pref
Test plan:
prove t/Ris.t
should return green
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Rather than add/remove regular expressions to skip modules (like bug 9054), encapsulate the decision logic into a separate function.
Currently there are three libraries which trigger halts:
Koha::NorwegianDB (which was already there)
Koha::ElasticSearch::Indexer
Koha::SearchEngine::Elasticsearch::Search
TEST PLAN
---------
1) prove t/00-load.t
-- should barf horribly on Catmandu stuff
if not: sudo apt-get remove libcatmandu-marc-perl
then repeat step.
2) apply patch
3) prove t/00-load.t
-- should not barf horribly
4) run koha qa test tools
NOTE: The four optional modules for Koha::NorwegianDB are
listed in the PerlDependencies.pm, while there is
no mention of Catmandu libraries at all there.
This may be another bug which needs fixing.
TECH NOTES (for ideas of how to tinker around):
These three things should trigger the three module cases:
sudo apt-get remove libcatmandu-marc-perl
sudo apt-get remove libcatmandu-store-elasticsearch-perl
sudo apt-get remove libconvert-basen-perl
You probably had koha-perldeps installed before, so the following wil mostly fix:
sudo apt-get install koha-perldeps libcatmandu-marc-perl
And in case you didn't have elastic search stuff installed:
echo deb http://packages.elastic.co/elasticsearch/1.7/debian stable main | sudo tee /etc/apt/sources.list.d/elasticsearch.list
wget -O- https://packages.elastic.co/GPG-KEY-elasticsearch | sudo apt-key add -
sudo apt-get update
cd ~
wget http://debian.koha-community.org/koha/otherthings/elasticsearch_deps.tar.gz
tar xvf elasticsearch_deps.tar.gz
cd es_deps
sudo dpkg i lib*
sudo apt-get install -f
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
These tests were wrong, but the package variable used to cache the
letters hid the problem.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Adds t/db_dependent/Members/Statistics.t.
Test plan:
Run the test.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
The goal of this patch is to avoid unecessary flush of the L1 cache on
creating a new CGI object each time C4::Languages::getlanguage is called
without a CGI object.
The new class Koha::Cache::Memory::Lite must be flushed by the CGI
constructor overide done in the psgi file. This new class will ease
caching of specific stuffs used by running script.
Test plan:
At the OPAC and the intranet interfaces:
Open 2 different browser session to simulate several users
- Clear the cookies of the browsers
- User 1 (U1) an User 2 (U2) should be set to the default language
(depending on the browser settings)
- U1 chooses another language
- U2 refreshes and the language used must be the default one
- U2 chooses a third language
- U1 refreshes and must be still using the one he has choosen.
Try to use a language which is not defined:
Add &language=es-ES (if es-ES is not translated) to the url, you should
not see the Spanish interface.
Signed-off-by: Jacek Ablewicz <abl@biblos.pk.edu.pl>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Jonathan Druart
Mark Tompsett
Marcel de Rooy
Alex Arnaud
Tomas Cohen Arazi
Marc Véron
remi
Kyle M Hall
Fridolin Somers
Galen Charlton