Use kohaTable requesting the REST api instead of the old KohaTable
Co-authored-by: Tomás Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 33084fb40c)
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Co-authored-by: Pedro Amorim <pedro.amorim@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit e64fd9aafc)
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 4b470e43a2)
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
To test:
1) Activate the IllModule system preference
2) Install a backend (BLDSS or FreeForm) following the wiki instructions:
3) Configure some authorised values for ILLSTATUS
4) Apply patch
5) Run database update
6) Verify your configured values have been updated to ILL_STATUS_ALIAS
7) Add another ILL_STATUS_ALIAS: there should now be an explanation in the
categories list
8) Go to the ILL module and add a new request
9) Edit the request, verify that your status alias show in the status list
10) Set one of your status and save
11) Verify that the ILL requests list search filters show your status alias
12) Manage the request again and verify that the ILL request log shows the
status descriptions correctly
13) Verify the description of the ILLHiddenRequestStatuses has
been updated with the new authorised value category
Signed-off-by: Pedro Amorim <pedro.amorim@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 412c026101)
Signed-off-by: Jacob O'Mara <jacob.omara@ptfs-europe.com>
To test:
1. prove t/db_dependent/Illrequests.t
Signed-off-by: Magnus Enger <magnus@libriotech.no>
Tried to change the borrowernumber connected to an ILL request
and checked that the associated hold was updated to the new
patron as well.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1. prove t/db_dependent/Illrequests.t
Signed-off-by: Magnus Enger <magnus@libriotech.no>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This commit adds support for the concept of ILL request update notices.
- Adds a new Koha::Illrequest::SupplierUpdate class that is used to
encapsulate an update to a request, this update may come from a
supplier via a backend or from core ILL via, perhaps, a user action
- Adds a new Koha::Illrequest::SupplierUpdateProcessor base class that
can be subclassed in order to create a processor that can be passed an
update and act accordingly.
- Updates to Illrequest.pm to support the above classes and allow core
Koha to offer update processors
- A shell script to initiate a periodic process to check for updates
meeting given criteria and run the appropriate processors
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
https://bugs.koha-community.org/show_bug.cgi?id=28909
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This commit fixes the bug described in this bug.
- When a partner is selected, pass their borrowernumber rather than email to the
receiving script
- Iterate all selected partners, send a notice to each, using the
recipient's borrowernumber in the notice, the recipient's email is
derived from their patron object
TEST PLAN:
1. DO NOT apply the patch.
2. Follow the following setup:
*** Setup start ***
- Create a report using the following SQL in order to verify that
notices are being generated:
SELECT borrowernumber, subject, content, message_transport_type,
to_address, from_address FROM message_queue WHERE letter_code LIKE
'ILL%' ORDER BY message_id DESC
- Create two "partners". These are patrons that belong to a
patron category that has a code that matches the <partner_code> value in
your koha-conf.xml (default is ILLLIBS). Patrons in this category must
have a primary email defined. Patrons defined in this way are offered as
request partners within the ILL interface.
- Go to "Koha administration", search for "ILLModule" syspref, ensure it
is set to "Enable"
- Go to "Koha administration", search for "IllLog" syspref, ensure it is
set to "Log"
BRANCH CONFIG
- Go to "Koha administration" > "Libraries"
- Choose a library and "Edit" it
- Ensure the "Email" field for the library is populated
SENDING REQUEST TO PARTNERS
- Go to the "Manage ILL request" screen for a request, create a request
if one does not exist
- Choose "Place request with partners"
- Select both partners that were defined earlier, then click
"Send email"
- Run the report created earlier
=> TEST: Observe that a notice was created and the borrowernumber is
that of the request creator, not the recipient
*** Setup end ***
3. Apply the patch
a. Go to the "Manage ILL request" screen for a request, create a request
if one does not exist
b. Choose "Place request with partners"
c. Select both partners that were defined earlier, then click
"Send email"
d. Run the report created earlier
=> TEST: Observe that once notice per partner is created, the
borrowernumber column for each notice contains the borrower number of
the recipient, not the request creator
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
If a backend hasn't been updated to support this functionality, we need
to handle that gracefully
Also, this commit fixes some indentation.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This commit allows illview to use an intranet template supplied by the backend, as
per other stages. The template must be named illview.inc
Test plan:
- Apply the patch
- Install FreeForm backend (https://github.com/PTFS-Europe/koha-ill-freeform)
- Create a request
- On the resulting "Manage ILL request" note the display is normal
- Create a new file in the FreeForm backend directory: /intra-includes/illview.inc
with the following content:
[% BLOCK backend_jsinclude %]
<script>(function() { alert("Working!"); })()</script>
[% END %]
- Restart Plack if enabled
- Reload the page
=> TEST: Observe that the alert specified in the template is displayed
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
1) This removes support for passing string dates to CanBookBeIssued. The
function didn't publicly even document support for string dates, only
DateTime objects.
2) We get a $duedate always at least from CalcDateDue so having
$issuingimpossible{INVALID_DATE} = output_pref($duedate);
was unneccesary and thus removed.
3) The check "duedate cannot be before now" was needlessly complex: if
the due date really cannot be before now we should check seconds too
and warn the librarian! Thus the truncation to minutes can be dropped
safely.
To test:
1) prove t/db_dependent/Circulation.t
2) prove t/db_dependent/Illrequests.t
3) Enable OnSiteCheckouts and disable SpecifyDueDate syspref. Create
on-site checkout for any patron and verify the due date is your
current date at 23:59, you can check the exact minute with sql:
> select * from issues
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This commit sorts metadata by key prior to preparing a notice with it
Test plan:
- Do not apply patch
- Create a report with the following SQL:
SELECT * FROM message_queue;
- Create an ILL request with plenty of metadata
- Go to "Manage request"
- Send a notice to a patron
- Run the report created earlier
=> TEST:
- Observe that the metadata is in random order
- Apply the patch
- Create an ILL request with plenty of metadata
- Go to "Manage request"
- Send a notice to a patron
- Run the report created earlier
=> TEST:
- Observe that the metadata is now sorted alphabetically by key
Signed-off-by: Jill Tivey <Jill.Tivey@sasa.gov.scot>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch changes an active request's backend and initiates the
migration on that request, rather than creating another and migrating
that.
The majority of the work to accomplish this bug is being carried out in
the backends, since Koha delegates migrations to them.
Signed-off-by: Barry Cannon <bc@interleaf.ie>
Signed-off-by: Assumpta Byrne <abyrne@ait.ie>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
On bug 17591 we discovered that there was something weird going on with
the way we export and use subroutines/modules.
This patch tries to standardize our EXPORT to use EXPORT_OK only.
That way we will need to explicitely define the subroutine we want to
use from a module.
This patch is a squashed version of:
Bug 17600: After export.pl
Bug 17600: After perlimport
Bug 17600: Manual changes
Bug 17600: Other manual changes after second perlimports run
Bug 17600: Fix tests
And a lot of other manual changes.
export.pl is a dirty script that can be found on bug 17600.
"perlimport" is:
git clone https://github.com/oalders/App-perlimports.git
cd App-perlimports/
cpanm --installdeps .
export PERL5LIB="$PERL5LIB:/kohadevbox/koha/App-perlimports/lib"
find . \( -name "*.pl" -o -name "*.pm" \) -exec perl App-perlimports/script/perlimports --inplace-edit --no-preserve-unused --filename {} \;
The ideas of this patch are to:
* use EXPORT_OK instead of EXPORT
* perltidy the EXPORT_OK list
* remove '&' before the subroutine names
* remove some uneeded use statements
* explicitely import the subroutines we need within the controllers or
modules
Note that the private subroutines (starting with _) should not be
exported (and not used from outside of the module except from tests).
EXPORT vs EXPORT_OK (from
https://www.thegeekstuff.com/2010/06/perl-exporter-examples/)
"""
Export allows to export the functions and variables of modules to user’s namespace using the standard import method. This way, we don’t need to create the objects for the modules to access it’s members.
@EXPORT and @EXPORT_OK are the two main variables used during export operation.
@EXPORT contains list of symbols (subroutines and variables) of the module to be exported into the caller namespace.
@EXPORT_OK does export of symbols on demand basis.
"""
If this patch caused a conflict with a patch you wrote prior to its
push:
* Make sure you are not reintroducing a "use" statement that has been
removed
* "$subroutine" is not exported by the C4::$MODULE module
means that you need to add the subroutine to the @EXPORT_OK list
* Bareword "$subroutine" not allowed while "strict subs"
means that you didn't imported the subroutine from the module:
- use $MODULE qw( $subroutine list );
You can also use the fully qualified namespace: C4::$MODULE::$subroutine
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch replaces a few more trivial cases where we were using
library->branchemail with a fallback to KohaAdminEmail to just use the
new library->from_email_address method directly instead.
There were also a couple of cases where we were passing borrowernumber
and the patrons library from address too.. this is unneccesary as the
code in _send_email_massage will already default to patron library from
address if we do not pass an override.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Added a semicolon.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch is the result of making the same changes we did on the
t/db_dependent/AuthorisedValues.t file (replacing the calls to
Koha::AuthorisedValues->search with the tricky branchcode param, and
call ->search_with_library_limits, with the library_id as a third
parameter.
What I did was:
$ git grep 'Koha::AuthorisedValues\->search'
and then revisited each of the grep results to check if they added the
'branchcode' parameter to the filters.
This patch changes the calls to ->search, for
->search_with_library_limits in all the places that require it in the
current codebase [1].
To test:
1. Apply this patch
2. Run:
$ kshell
k$ prove t/db_dependent/Koha/Charges/Sales.t \
t/db_dependent/Ill*
3. Verify the batchmod.pl script is working and filtering the authorised
values keeps working
[1] Some places like the Koha/Template/Plugin/AuthorisedValues.pm plugin
don't seem to be tested, at first glance.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This commit implements the feedback from Katrin in comment #103 ->
comment #108:
- Fixed rebase issue mentioned in comment #103
- Fixed ILL notice display mentioned in comment #106
- Fixed bug with metadata display, though not the issue that was
mentioned in comment #107
- Fixed buttons display mentioned in comment #107, in addition to some
more buttons suffering the same issue
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This commit fixes this bug, it was broken in a number of ways.
Fixes include:
- Added necessary config block in C4::Letters to enable the TT notice
syntax introduced in an earlier commit to work
- Changed template variables to refer to singular objects rather than
multiple e.g. borrowers -> borrower
- Fixed missing / misnamed variables
This commit also implements the additional syspref checks suggested by
Katrin in comment #87
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch removes the hard coded 'N/A' being passed to
GetPreparedLetter and passes in the branchcode of the ILLRequest so
notices can be branch specific.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch updates the patchset to use recnetly introduced methods for
obtaining the correct inbound and reply email addresses for branches.
We also move get_staff_to_address into Koha::Library alongside
inbound_email_address and rename it to inbound_ill_address.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds the ability for ILL to send notices, both triggered by
staff and triggered by events.
Staff can trigger notices to patrons from the "Manage ILL request" screen:
- ILL request ready for pickup
- ILL request unavailable
- Place request with partners
The following notices to staff are triggered automatically:
- Request has been modified by patron
- Request has been cancelled by patron
Branches can now specify an "ILL email" address to which notices
intended to inform staff of changes to requests by patrons can be sent.
The sending of notices is controlled by a few new sysprefs:
- "ILLDefaultStaffEmail" - Fallback email address for staff ILL notices
to be sent to in the absence of a branch address
- "ILLSendStaffNotices" - To specify which staff notices should be sent
automatically when requests are manipulated by patrons
Patron notices are also controlled by the patron's messaging
preferences
Sponsored-by: PTFS Europe
Signed-off-by: Niamh Walker-Headon <Niamh.Walker-Headon@it-tallaght.ie>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds two new sysprefs. 'ILLDefaultEmail', 'ILLSendStaffNotices' and a new column to the
branches table called 'branchillemail'. It also adds five ILL related
notices.
Here we are providing the ability for a branch to have a dedicated email
address for it's ILL staff, the idea being that any notices sent by ILL
to staff need to go to specific staff, rather than the general branch
email address. If no branch specific address is defined, the address
specified in the ILLDefaultEmail syspref is used.
We're also providing a syspref 'ILLSendStaffNotices' to allow the user to specify which
notices should be sent to staff upon certain events.
We are also providing patron messaging preferences for the two patron
bound notices
We are also providing five notices for various ILL related events.
Sponsored-by: PTFS Europe
Signed-off-by: Niamh Walker-Headon <Niamh.Walker-Headon@it-tallaght.ie>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch makes Koha::Illrequest use the new syntax for Koha::Email and
sending the email.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch corrects a few additional cases where DateTime->now is called
directly instead of via Koha::DateUtils.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
The recently introduced Ill item creation for circulation feature was
not properly handling the move from AddItem to Koha::Item->new()->store.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
As mentioned by Nick in comment #69, the checkout button displays even
for requests without a biblio attached (such as chapters). This patch
fixes that.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Looks like the atomicupdate and sysprefs.sql changes were lost at some point.
Don't forget to run QA tools on your patches before submitting
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch updates a request's status to RET upon return
Sponsored-by: Loughborough University
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
We only want the ILL circulation functionality to be available if the
appropriate syspref and perm are available, this patch adds those
checks.
Sponsored-by: Loughborough University
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch adds the ability to circulate ILL requests. Once a request has a suitable status, a "Check out" button is displayed on the "Manage request" toolbar. Clicking this will enable the user to check out the item either to the user who made the request or an in-house statistical user. A due date can be specified, but if not circ rules are used.
Prior to the check out, an item is created which is attached to the biblio record that was created when the request was added
This development has been carried out according to the originally stated requirements of the customer that sponsored it, detailed here: https://wiki.koha-community.org/wiki/ILL_Circulation_RFC
Test plan:
1. Ensure the FreeForm ILL backend is available
2. Enable the "CirculateILL" syspref
3. Ensure you have a statistical patron category defined (patron category type "Statistical")
4. Ensure you have at least one patron in your statistical patron category
5. Create a new FreeForm request (make a note of the library you select when creating it)
6. Mark the new request as confirmed by clicking the "Confirm request" button on the "Manage ILL request" page
7. TEST: Observe that a "Check out" button is now displayed in the request toolbar
8. Click the "Check out" button in the "Manage ILL request" page
9. In the "Issue requested item to..." screen:
a. Do not select a statistical patron at this time
b. You can at this point choose an item type, this will determine the type of the item that will be created for this request
c. TEST: Observe that the default selected "Library" matches that that was defined when creating the request
d. Do not select a due date at this time
10. Click "Submit"
11. TEST: Observe that the "Item checked out" screen displays, issued to the requesting patron with a due date corresponding to appropriate circ rules
12. Click "Return to request"
13. TEST: Observe that the request's status is now "Checked out"
14. Click the "Bibliographic record ID" link
15. TEST: Observe that the bibliographic record now has one item attached to it which is checked out
16. TEST: Observe that the item barcode is "ILL-" + the ILL request ID
17. Return to step 5., however, this time select a statistical patron and test that the item use is recorded and the item is not issued
18. Return to step 5., however, this time manually select a due date and test that the item's due date is set correctly on check out
19. Check in the item
20. TEST: Observe that the request's status is updated to "Returned to library"
21. Now implement a restriction on the patron (perhaps a fine) which would prevent them from checking out an item
22. Return to step 5. follow the instructions to step 10.
23. TEST: Observe that a banner is displayed at the top of the screen informing you that there was a problem checking the item out, containing a link to the patron's account page
24. Resolve the problem with the patron's account
25. Return to step 8.
26. TEST: Observe that the item is now successfully checked out
27. Disable the "CirculateILL" syspref
28. Return to step 5. at step 7. Observe that the "Check out" button is NOT displayed
Sponsored-by: Loughborough University
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Bug 9978 should have fixed them all, but some were missing.
We want all the license statements part of Koha to be identical, and
using the GPLv3 statement.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Caused by undefined method:
Use of uninitialized value in concatenation (.) or string at /usr/share/koha/Koha/Illrequest.pm line 857.
Use of uninitialized value in concatenation (.) or string at /usr/share/koha/Koha/Illrequest.pm line 859.
Test plan:
Run test again
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Andrew Isherwood <andrew.isherwood@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch ensures that parameters that are present are passed forward
when accepting the copyright notice.
Test plan:
- Clone the latest version of the FreeForm backend from:
https://github.com/PTFS-Europe/koha-ill-freeform
- Ensure the ILLModuleCopyrightClearance syspref is populated
- Create an OpenURL in order to pre-populate the FreeForm form, a suitable URL would be:
<your_koha_instance>/cgi-bin/koha/opac-illrequests.pl?openurl=true&backend=FreeForm&method=create&opac=1&atitle=Theater%20careers.%20%5Belectronic%20resource%5D%20%3A%20a%20realistic%20guide.&aulast=Donahue%2C%20Tim&date=2012&genre=article&isbn=978123123123&issn=1234-5678&issue=34&pages=12-34&sid=EBSCO%3AAthlone%20Institute%20of%20Technology%3Aait.101326&title=article%20title%20here&volume=12
- Log in
- Accept the copyright notice
=> TEST: Observe that the FreeForm form is pre-filled with the metadata
supplied in the OpenURL
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch adds the display of requested partner email addresses when an
ILL backend provides the ability to send requests to partners. Partner
email addresses are displayed in the illlist and illview displays, they
are also included in the 'illrequests' API response.
* api/v1/swagger/paths/illrequests.json:
- Add 'requested_partners' as an 'embed' enum
* Koha/Illrequest.pm:
- Add 'requested_partners' accessor calling optional backend 'get_requested_partners' method.
- Store requested partners upon email send, calling optional backend 'set_requested_partners' method.
- Add 'requested_parners' embed to overloaded TO_JSON method.
* koha-tmpl/intranet-tmpl/prog/en/modules/ill/ill-requests.tt:
- Add 'requested_partners' embed to illrequests API call
- Add render function for "Additional status" datatables column
- Add display of requested partner email addresses to illlist table
- Add display of requested partner email addresses to illview display
To test:
1) Enable Interlibrary loans
2) Add a backend that supports sending requests to partners, e.g.
FreeForm
3) Set up at least one partner
4) Create an ILL request
5) Send request to partner(s)
6) Observe partner(s) email address(es) are displayed in "View ILL
requests" view
7) Observe partner(s) email address(es) are displayed in "Manage ILL
request" view
Signed-off-by: mmg@interleaf.iehttps://bugs.koha-community.org/show_bug.cgi?id=20653
Bug 20563: (follow-up) Fix requested partners
As per:
https://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=20563#c10
Thanks for the suggestion on merging the "Status" and "Additional status" columns, looks much better!
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch adds support to Illrequest.pm to allow delegation of
unmediated requests to happen in backends that support them.
It is a recreation of
https://bugs.koha-community.org/bugzilla3/attachment.cgi?id=66629&action=diff
which had diverged sufficiently as to make it impossible to apply
Signed-off-by: Stephen Graham <s.graham4@herts.ac.uk>
Signed-off-by: David Peacock <d.m.peacock@herts.ac.uk>
Signed-off-by: Jayne Maisey <j.maisey@herts.ac.uk>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch adds the "Columns settings" values for the illrequests table
Signed-off-by: Niamh.Walker-Headon@it-tallaght.ie
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Bug 21063: Add ability to show / hide columns
This patch adds the "Column visibility" functionality to the main ILL
request list table.
To test:
- Ensure ILL is enabled and you have some requests
- Apply patch
- From the "Koha administration screen, select "Configure columns"
- In the "Columns settings" page:
=> TEST: Ensure an "Interlibrary loans" category exists
- Upon expanding the category:
=> TEST: Ensure a table is displayed showing columns
=> TEST: Ensure the "action" column has "Cannot be toggled"
pre-selected
=> TEST: Change values for columns and ensure they're saved
- From the main staff menu, select "ILL requests"
- In the table:
=> TEST: Click the "Column visibility" button and ensure a modal
containing all columns (except "Action") is displayed
=> TEST: Select various columns and ensure they are shown and hidden
Signed-off-by: Niamh.Walker-Headon@it-tallaght.ie
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Bug 21063: (follow-up) Add user ID to column list
As originally specified in bug 20883, there is a requirement for some
users to be able to display the user ID (borrowernumber) in the UI.
This patch adds that ability to this bug, 20883 will be marked as a
duplicate of this one.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Bug 21063: (follow-up) Amendments for rebase
Modify to add the additional changes required now we're rebasing on top
of the dependency tree. Includes adding additional columns (and changing
indexes for search/filter where appropriate)
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Bug 21063: (follow-up) Add comments to column list
Since this bug is now dependent on Bug 18591 (Allow an arbitrary number
of comments on ILLs) we need to add the comments column to this table
and the list of selectable columns. This patch does this.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Bug 21063: (follow-up) Sanitize datatable data
This mitigates bug 22268 by sanitizing data prior to display using the
built in $.fn.dataTable.render.text() helper provided by Datatables.
The patch was added here, rather that in 22268 since this is the bug
that introduced the problem by increasing the number of fields that are
displayed in the table, some of which could contain user provided
malicious data
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch allows logging of arbitrary actions on request objects. A
chronological summary of these actions can then be displayed when
viewing a request.
This patch also adds logging of request status changes. Additional work
has been done on the BLDSS backend to log requests to the BLDSS request
status check API.
To test:
- Apply patch
- Ensure the Illlog logging preference is turned on
- Create an ILL request and perform actions on it that change it's
status.
- Navigate to the "Manage ILL request" screen
- Click the "Display request log" button
- Observe that a modal opens displaying a summary of the status changes.
Signed-off-by: Niamh Walker <Niamh.Walker-Headon@it-tallaght.ie>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Since this bug now is dependent on Bug 20581, it should be aware of the
custom statuses provided in 20581. This patch enables logging of request
statuses being changed to custom ones. As such the test plan is
modified:
To test:
- Apply patch
- Ensure the Illlog logging preference is turned on
- Ensure you have some custom request statuses defined in the
Authorised Values ILLSTATUS category
- Create an ILL request and perform actions on it that change it's
status.
- Edit the request and change status to a custom one
- Navigate to the "Manage ILL request" screen
- Click the "Display request log" button
- Observe that a modal opens displaying a summary of the status changes.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
The OPAC view wasn't correctly restricting the display of backends when
the ILLOpacbackends preference was set.
See the test plan on comment 7
Signed-off-by: Niamh.Walker-Headon@it-tallaght.ie
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Stupid bug, we need to pass NULL not -1 when unsetting status_alias
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
status_alias will arrive in the Koha object as a string, so when we
special case it, we should also pass a string
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
We need Koha::Illrequest->status_alias to return the correct authorised value.
Since the foreign key uses a non-unique column, we need to take into
account the authorised value category too.
This patch overloads status_alias with some additional logic that
considers the request's branch and the authorised value category to
attempt to return the correct value.
The same logic is applied to the custom statusalias method, which
returns the entire AuthorisedValue object
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch provides status_alias support for the Koha::Illrequest
object.
- New 'statusalias' getter method, returns the request's status_alias
authorised value object if set, otherwise undef
- Overloads existing 'status' method, getter/setter accessors intact,
but setting the request's status now implicitly removes any status_alias
that has been set
Signed-off-by: Niamh.Walker-Headon@it-tallaght.ie
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Tomas Cohen Arazi
Pedro Amorim
Katrin Fischer
Lari Taskula
Andrew Isherwood
Joonas Kylmälä
Jonathan Druart
Martin Renvoize
Nick Clemens
Marcel de Rooy