GetReserveFee was removed as part of the migration to circulation
rules-based hold fees, but reserve/request.pl still imported and
used it, causing compilation errors.
This patch replaces the two usages of GetReserveFee with the modern
approach using Koha::Item->holds_fee($patron), matching the
implementation in opac-reserve.pl.
The fee is calculated by iterating through available items and using
the first non-zero fee found, which provides backward compatibility
with the legacy reserve_charge template variable.
This implementation uses ReservesControlBranch to determine which
branch's circulation rules apply (either item home library or patron
home library), consistent with the existing Koha policy framework.
Test plan:
1. Apply patch
2. Verify reserve/request.pl compiles: perl -wc reserve/request.pl
3. Navigate to staff interface holds page with patron and biblio
4. Verify hold fee is displayed correctly if configured in
circulation rules
5. Place a hold and verify fee is charged correctly
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Generated using
`perl misc/devel/tidy.pl --perl`
Signed-off-by: Martin Renvoize <martin.renvoize@openfifth.co.uk>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This patch adds hold fee information display in the staff client's hold
request interface, bringing it to feature parity with the OPAC.
The OPAC already shows patrons the fee that will be charged for placing
a hold, but the staff client did not display this information when staff
place holds on behalf of patrons. This creates a transparency gap where
staff cannot inform patrons about potential charges.
Changes:
- Import GetReserveFee function in reserve/request.pl
- Calculate reserve charges for each biblio record
- Display fee information in both single and multi-hold interfaces
- Show appropriate messaging based on HoldFeeMode system preference
- Use consistent formatting with currency display
Test Plan:
1. Set up hold fees:
- Go to Administration > Patron categories
- Edit a patron category and set a "Hold fee" (e.g., 1.00)
- Ensure HoldFeeMode system preference is set (default: "only if all
items are checked out and the record has at least one")
2. Test single hold with fee display:
- Go to a bibliographic record
- Click "Place hold"
- Find a patron from the category with hold fees configured
- Verify fee information displays after the title:
* Shows "Note: [Patron Name] will be charged a hold fee of $1.00
for placing this hold" when the HoldFeeMode is set to "any time
a hold is placed"
* Or "...when they collect this item" if HoldFeeMode is set to "any
time a hold is collected"
3. Test multi-hold with fee display:
- Ensure 'DisplayMultiPlaceHold' preference is set to 'Enable'
- Search the catalog
- On the search results page, select multiple biblios and click
'Place hold'
- Search for the same patron
- In the confirmation table, verify each record shows:
* "Hold fee: $1.00 (charged when placed)" in the Information column
* Or "(charged when collected)" based on HoldFeeMode
4. Test no fee display:
- Repeat tests with a patron from a category with no hold fee
- Verify no fee information is displayed
5. Test different HoldFeeMode settings:
- Change HoldFeeMode system preference to 'any_time_is_collected'
- Verify messaging changes to "when they collect this item"
- Test with 'not_always' mode and verify fee only shows when appropriate
6. Verify existing functionality:
- Ensure hold placement still works normally
- Verify all other hold interface elements remain unchanged
- Test that holds are properly placed with or without fees
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This patch adds a new parameter to ModReserve: skip_fix_priority
The page for altering priority ensures each hold has a unique rank, so doesn't allow for setting two
holds to the same rank, so we don't need to reorder everything until the end (in case of some cancellations etc)
This patch also makes FixPriority exported and updates the name as it is already called in a few places outside of
C4:Reserve
To test:
1 - Place many holds on a record, 50 - 150
https://github.com/kidclamp/handy-koha-script/blob/main/randhold.pl
2 - View the record in the staff interface:
http://localhost:8081/cgi-bin/koha/catalogue/detail.pl?biblionumber=312
3 - Click on the 'Holds' tab
4 - Adjust the priority of several holds using the dropdowns
5 - Open the network tab in the browser console (F12) to view the timing
6 - Click 'Update hold(s)' and note the time
7 - Apply patch, restart all
8 - Repeat
9 - Confirm timing is better and numbering updates correctly
10 - Sign off!
Note: The script adds holds that may be marked as 'lowestPriority' these will always all group at the bottom of the record
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jan Kissig <bibliothek@th-wildau.de>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
To test:
1 - Add a bunch of holds to a record
https://github.com/kidclamp/handy-koha-script/blob/main/randhold.pl
2 - Enable profiling:
https://wiki.koha-community.org/wiki/Profiling_with_Devel::NYTProf#NYTProf_with_Plack
3 - Browse to the record and load the holds table
4 - View the flame graph for the request like instructions in #2
5 - Note that Koha::Hold->borrower and Koha::Hold->item take a lot of time
6 - Apply patch, restart all
7 - Reload page
8 - Reload flame graph
9 - Note time for fetching borrowers and items is significantly reduced
10 - Sing off!
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@openfifth.co.uk>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This patch implements proper override logging for holds following the
Alternative implementation pattern used for checkouts and renewals.
Instead of just removing the orphaned logging code from the original
Bug 9762 implementation, this patch properly implements override logging
by updating AddReserve to accept and log override information, similar
to how AddIssue handles confirmations and forced overrides.
Changes:
C4/Reserves.pm:
- Added JSON qw(to_json) import
- Updated AddReserve to accept confirmations and forced parameters
- Enhanced the existing logaction call to include override information
in JSON format when overrides are present
- Log format matches the Alternative implementation pattern:
* hold ID
* branchcode
* biblionumber
* itemnumber
* confirmations array
* forced array
Koha/REST/V1/Holds.pm:
- Added confirmations array building in the add() method
- Pass 'HOLD_POLICY_OVERRIDE' confirmation when override_all is true
- Pass confirmations parameter to AddReserve call
reserve/request.pl:
- Removed orphaned original implementation logging code
- Removed unused variables and imports (message, @message, user, etc.)
- Removed C4::Log import
koha-tmpl/intranet-tmpl/prog/en/includes/action-logs.inc:
- Added 'HOLD_POLICY_OVERRIDE' case to translate_log_override block
- Displays as "Hold policy override" in log viewer
koha-tmpl/intranet-tmpl/prog/en/modules/tools/viewlog.tt:
- Added JSON display handling for HOLDS module (similar to CIRCULATION)
- Displays hold ID, biblionumber, and optional itemnumber with links
- Shows forced and confirmation overrides using translate_log_override
This ensures hold overrides are logged consistently with the Alternative
implementation pattern, providing proper audit trails for policy overrides
that are properly displayed in the log viewer.
Signed-off-by: Andrew Fuerste Henry <andrew@bywatersolutions.com>
Signed-off-by: Paul Derscheid <paul.derscheid@lmscloud.de>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Brendan Lawlor <blawlor@clamsnet.org>
Signed-off-by: Martin Renvoize <martin.renvoize@openfifth.co.uk>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Test plan:
1. APPLY PATCH, updatedatabase, restart_all
2. Have two staff members. 1. Superlibrarian, 2. Staff with new permission to `alter_hold_targets`
3. Now place some holds on different record, you'll want some item level holds and some record level holds.
4. After placing some holds go to a record with some holds on it.
5. Go to the holds tab (reserve/request.p)
6. You should notice a disabled 'Move selected (0)' button, next to 'Cancel selected (0)'
7. Select some holds to move, ensure that the number updates accordingly. ( Move selected (2) )
8. When you click the button you should see 2 options, 'Item level holds to a different item' and 'Record level holds to a different record'
9. Clicking on either should bring up a modal with information about the holds you selected to move.
10. If you have item level holds and you select 'Item level holds to a different item' those holds should appear pre-checked.
11. If you have item level holds and you select 'Record level holds to a different record' those holds checkboxes should be disabled by default, you should see the 'Problem' as 'Cannot move a waiting or record level hold'
12. If you are moving a item level hold you should see a searchbar labeled 'Enter the item barcode of new hold target:'.
13. Enter a full or partial barcode and click search
14. You should see your item, if it exists.
15. Check 'Move all selected item level holds to this item', once you do so the yellow 'Move selected holds' button should be enabled.
16. Click 'Move selected holds', the hold should be moved.
17. You should see a message like " Moved the following holds:
Hold ID: 1854 - Moved from The Arden edition of the works of William Shakespeare. to The Arden edition of the works of William Shakespeare."
19. Do steps 12 - 17 again, but with a record level hold.
20. Now make or have many holds on a specific target record to test priority. Make note of the current priority
21. Now move a hold on to that record, testing both item and record level holds.
22. Now on the target record review the priority. The holds originally on the record should not have changed. The hold you move should now have the lowest priority on the record.
23. Check the original record, if a hold was moved all other priority should have been adjusted correctly. FOr example, if the hold you moved was 3 of 4 then the others should have adjusted priority of 1 2 3 now.
24. Turn on HoldsLog if it is disabled.
25. Move some holds, both item and record ones, and review the logs after each one. There should be a correct MODIFY entry for each move.
26. Make an item with a hold on it as damaged and turn on AllowHoldsOnDamagedItems. Try to move the hold, you should get an error telling you that the target item is damaged.
27. Now login as the non-superlibrarian patron from step 2. If they have the `alter_hold_targets` permission they should see the 'Move selected' button.
28. Revoke the `alter_hold_targets` permission. The button should not appear now.
Signed-off-by: Pedro Amorim <pedro.amorim@openfifth.co.uk>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This patch allows you to save commands that have been overridden by someone.
The patch has been updated but is not yet completed. Tests 10, 13, 14, and 17 are still not functional. Tests 15 and 16 need to be fixed as they do not display the barcode. All other tests should be functional.
To test:
--After each step, a message will be displayed in the action_logs table and in Tools > Log viewer --
Circulation -- Checking out
1) Check out an item that is age-restricted (AgeRestrictionOverride syspref)
2) Check out an item that has a “not for loan” status (AllowNotForLoanOverride syspref)
3) Check out an item that has a “lost” status (IssueLostItem syspref)
4) Check out an item to a patron who has reached the checkout limit (AllowTooManyOverride syspref)
5) Check out an item to a patron who is not allowed to borrow this item type
6) Check out an item to a patron who has unpaid fines (AllFinesNeedOverride and/or AllowFineOverride + noissuescharge sysprefs)
7) Check out an item on hold for someone else
8) Check out an item on hold ready for pickup by someone else
9) Check out an item already checked out to someone else (AutoReturnCheckedOutItems syspref)
10) Check out to a patron who has restrictions
Circulation -- Checking in
11) Ignore a hold upon check in
12) Ignore a hold and transfer upon check in
Circulation – Renewing
13) Renew an item on hold for someone else (AllowRenewalOnHoldOverride syspref)
14) Renew an item that has reached the maximum number of renewals (AllowRenewalLimitOverride syspref)
Holds
15) Place a hold for a patron who is not allowed to place this item type on hold (AllowHoldPolicyOverride syspref)
16) Place a hold for a patron who has reached the maximum number of holds
17) Place an item-level hold when rules dictate that this is not allowed (In circulation rules put "On shelf holds allowed" to "If any unavailable")
Sponsored-by: Solutions inLibro inc. <https://inlibro.com/>
Signed-off-by: Martin Renvoize <martin.renvoize@openfifth.co.uk>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
It can be useful, for instance, if a library has the same title from
different publishers (so 1 title but several biblio records) but the
user only wants a copy of the book, regardless of the publisher.
Test plan:
0. Run updatedatabase.pl and misc/devel/update_dbix_class_files.pl
1. Go to intranet search, display some results, click on some checkboxes
and click on 'Place hold' button at the top of the results.
2. Search for a patron
3. Check the 'Treat as hold group' checkbox
4. Click on 'Place hold'
5. In the next screen you should see all the holds you placed with the
additional text '(part of a hold group)' in Details column.
6. Click on the "hold group" link. A modal window should appear with
the content of the hold group (a list of holds)
7. Check in an item of one of the reserved biblios and confirm the hold
8. The hold status is changed to Waiting, and all other holds are deleted.
The other holds will also be removed from the holds queue.
9. Confirm tests pass
- t/db_dependent/Koha/Holds.t
- t/db_dependent/Reserves/HoldGroup.t
Note: the "hold group" link is displayed in the following pages:
- reserve/request.pl
- circ/circulation.pl
- members/moremember.pl
- circ/pendingreserves.pl
- circ/view_holdsqueue.pl
Note: A hold group is counted as only one hold
Sponsored-by: Catalyst IT
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Pedro Amorim <pedro.amorim@openfifth.co.uk>
Signed-off-by: Andrew Fuerste Henry <andrew@bywatersolutions.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This patch updates all existing calls to the renamed method throughout
the codebase to maintain compatibility.
Changes:
* Updated C4::Circulation calls to use revert_found()
* Updated C4::Reserves calls to use revert_found()
* Updated test files to use revert_found()
* Maintained all existing functionality and behavior
All existing functionality is preserved - this is purely a method
name change to reflect the expanded capability.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Emily Lamancusa <emily.lamancusa@montgomerycountymd.gov>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@openfifth.co.uk>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
When no item is available, with AllowHoldPolicyOverride, a triangle appears on
each item to be forced, but if you choose “next item available” without
having any item available, you won't see anything. Additionally, the top
warning message about "No items are available" does not show when
'AllowHoldPolicyOverride' is set to allow and no items are available
(e.g. withdrawn, lost, damanged, depending on settings)
This patch corrects an error in request.pl where no incrementation of
$num_override happens when an item is forced. This causes the warning
triangle to appear on the 'Place hold' button on the bib level. The top
warning message is restored as well.
Finally, this patch changes the display of the fa-warning-triangle icon on the
'Place hold' buttons to increase contrast with the button color, making it
easier to see and increasing accessibility.
Test plan:
1) Set circulations rules for specific category and/or itemtype (for example 1
hold allowed for staff on books). Set AllowHoldPolicyOverride on "Allow".
2) Search for a book biblio with multiple items, and set each item to a
non-circulating status (withdrawn, lost, etc.)
3) Place a hold for a staff category patron for this bib record.
4) Normally you will see triangles on each item on specific section but you can
force it. When you just select the next item available none triangle and
none alert showing.
5) Apply this patch and restart_all.
6) Refresh your browser page.
7) Normally now there is a triangle into 'Place hold' submit button and an
alert message appears on the top of the page. The triangle is also more
visible.
8) Test other hold limits, such as max holds per record, to ensure the
appropriate top alert message appears and the triangle alert appears on
the 'Place hold' button.
Co-authored-by: Thibaud Guillot <thibaud.guillot@biblibre.com>
Sponsored-by: BibLibre
Sponsored-by: Westlake Porter Public Library <https://westlakelibrary.org>
Signed-off-by: Emily Lamancusa <emily.lamancusa@montgomerycountymd.gov>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This commit is generated using:
% perl misc/devel/tidy.pl
*within* ktd, to get the same version of perltidy than what will be used
by our CI (currently v20230309).
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
To test:
1) Create multiple patron clubs
2) Find a bib
3) Click Holds, then Clubs
4) Without entering any text, press the search button
5) Note that the list of clubs is not shown.
6) Apply patch and restart_all
7) Press the search button again, the entire list of clubs should be shown.
8) Ensure original search functionality still works
Signed-off-by: Roman Dolny <roman.dolny@jezuici.pl>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
We can easily replace the calls by ->suspend_hold and ->resume.
Test plan:
No behaviour changes expected.
Confirm that you can still suspend and resume holds (OPAC+staff)
Signed-off-by: Olivier V <olivier.vezina@inLibro.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Lisette Scheer <lisette@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Test plan:
1) Add a basic circulation rule like : 0 hold allowed on patron category
'A' and set AllowHoldPolicyOverride to 'Allow'
2) Make a hold on a patron belongs to this category
3) Normally you should see a warning on item (override needed) but it's
not the case
4) Apply this patch
5) Refresh and repeat step 2
This patch comes from an alternative patch on the original bug (I'm including
the original test plan for your information) :
(Bug 30687 - alternative patch): Always allow to force hold pickup location
If AllowHoldPolicyOverride is enabled and only some pickup locations are
available, you still have the possibility to force one of the others
pickup locations.
But when there are zero pickup locations available, that is not
possible.
This patch change that by always displaying the list of pickup locations
when AllowHoldPolicyOverride is enabled.
Test plan:
1. Apply patch
2. Disable AllowHoldPolicyOverride
3. Create a biblio B with an item I at library A.
4. Configure this library A to not be a pickup location
5. Add a "Default holds policy by item type" for item I type where "Hold
pickup library match" is "item's home library"
6. Try to place a hold on biblio B
You should not be able to place a hold because there is no valid
pickup locations
7. Enable AllowHoldPolicyOverride
8. Try to place a hold on biblio B
You should now see all valid pickup locations in a dropdown list
(with an exclamation mark in front of each option) with none selected
by default
9. Verify you can place a title-level hold and an item-level hold
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This reverts commit ab93008da7.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
The "biblio" Koha::Biblio object we send from the controller needs to be
accessible from the include files.
To avoid a clash we rename it biblio_info
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Bug 34478: [TO SQUASH] Manual fix - change links to JS form submission - cleanup comments and unused routine - request.pl/.tt
Bug 34478: [TO SQUASH] Manual fix - link to js post and add op to form - request.tt
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch moves code form scripts to a template plguin and unifies the calls
To test:
1 - Add a searchable patron attribute type
2 - Add values to several patrons and test patron searching from
Patrons home
Patrons search results
Holds request screen
Article request screen
Patron search sidebar
3 - Apply patch
4 - Confirm results are the same
Signed-off-by: Janusz Kaczmarek <januszop@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1. Apply patch
2. Add item level hold to a record/item, make sure patron has no other
holds on that record
3. Go to /cgi-bin/koha/reserve/request.pl?biblionumber=xxx where xxx is
the record you placed the hold for
4. Under "Existing holds" table, in "Details" column you should see
"Only item <barcode>" dropdown
5. Select "Next available" from the dropdown
6. Click Update hold(s)
7. Observe dropdown is gone and cell value has changed from
"Only item <barcode>" to "Next available"
8. Cancel the hold and add two item level holds for the same patron
9. Under "Existing holds" table, in "Details" column you should see
"Only item <barcode>", but no select dropdown
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1. Place some holds and go to /reserve/request.pl for that bib.
2. If the reserves.expirationdate is set to today or some date in the past the date does not display in the Flatpickr instance.
3. Change the reserves.expirationdate to sometime in the future, the date displays.
4. Aply patch, restart_all
5. Try steps 2-3 again.
6. This time if the expiration date is in the past you should see it displayed. However it will be uneditable.
7. Make sure holds with a expiration date in the future can still be properly edited.
Signed-off-by: Matt Blenkinsop <matt.blenkinsop@ptfs-europe.com>
Signed-off-by: Christine <chlee@pascolibraries.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
There are several places in the code where we precalculate ItemsAnyAvailableAndNotRestricted to avoid
looping on this routine when calling IsAvailableForItemLevelRequest on a list of items form a biblio
The value of ItemsAnyAvailableAndNotRestricted is only used when there is a circulation rule for
'onshelfholds' with a value of '2' (If all unavailable)
Rather than calculate a value that may never be used, let's cache this value per request when we do
calculate it - and reuse the cached value
To test:
1 - Apply patch
2 - Set circulation rule 'On shelf holds allowed' as 'If all unavailable'
make sure the rule applies to all of the items/patrons you test with
3 - Find a record with two items that are available
4 - Try to place a hold for a patron - not allowed
5 - Check out one item to another patron
6 - Attempt hold - still not allowed
7 - Check out second item to another patron
8 - Attempt hold - allowed!
9 - Apply patch
10 - Cancel and replace hold - it is allowed!
11 - Check in one item, and cancel hold
12 - Place hold - not allowed!
13 - Check in second item
14 - Place hold - not allowed!
15 - prove -v t/db_dependent/Holds/DisallowHoldIfItemsAvailable.t
Signed-off-by: Sam Lau <samalau@gmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch caches the return value of CanItemBeReserved that could
be then returned *on
demand*
We don't want to introduce side-effects hard to catch from this simple
change, so let's return the cache value only from the 2 scripts we are
dealing with.
This patch requests all item values from CanBookBeReserved on request.pl
Before this we either:
- Looped every item to find out that book could not be reserved
- Looped until we found an item that could be reserved, then looped all items to get statuses
In the worst case we avoid double processing a single item, in the best case we avoid double
processing all items (if only last on record is holdable)
To test:
1 - Find a record in staff client with several items
2 - Set AllowHoldsOnDamagedItems to 'Dont allow'
3 - Add a damaged item to record
4 - Set a hold rule to only allow holds form homebranch and ensure record has items from other branches
5 - Setup things to prevent more items from being held
6 - Attempt hold for patron
7 - Note item statuses
8 - Apply patch
9 - Confirm statuses are as they were before
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This is Julian's patch with some extra cleanup to reduce repeated code
If AllowHoldPolicyOverride is enabled and only some pickup locations are
available, you still have the possibility to force one of the others
pickup locations.
But when there are zero pickup locations available, that is not
possible.
This patch change that by always displaying the list of pickup locations
when AllowHoldPolicyOverride is enabled.
Test plan:
1. Apply patch
2. Disable AllowHoldPolicyOverride
3. Create a biblio B with an item I at library A.
4. Configure this library A to not be a pickup location
5. Add a "Default holds policy by item type" for item I type where "Hold
pickup library match" is "item's home library"
6. Try to place a hold on biblio B
You should not be able to place a hold because there is no valid
pickup locations
7. Enable AllowHoldPolicyOverride
8. Try to place a hold on biblio B
You should now see all valid pickup locations in a dropdown list
(with an exclamation mark in front of each option) with none selected
by default
9. Verify you can place a title-level hold and an item-level hold
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Aleisha Amohia <aleishaamohia@hotmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
For single bibs we use an ajax select2 dropdown, and we don't use this
value
To test:
1 - Place some holds on single bibs
2 - Confirm dropdowns for pickup location work as expected
3 - Do the same for multiple bibs selected from search results
4 - Apply patch
5 - Confirm there is no change after the patch
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
When placing an item-level hold in the Staff interface,
the table at the bottom of the screen (under the "Place
a hold on a specific item" heading) should display the
icon associated with the item type of each item in the
'Item type' column.
This feature broke in v22.05.00 (for Debian package installs):
instead of the item type icon you get the default 'broken
image URL' image of your web browser.
This patch fixes that.
Test plan:
1) (if needed) Configure the following System preferences:
- item-level_itypes => 'specific item'
- noItemTypeImages => 'Show'
2) (if needed) In Koha Administration > Item types, create
an item type and associate it with an icon
3) (if needed) Create a test bibliographic record, and add
an item to it that has an item type with an icon
4) Visit the bibliographic record's details page in the
Staff interface. Select 'Holds' on the left hand side,
then pick a patron. The "Place a hold on ..." page should
load. In the 'Item type' column of the table at the bottom
of the screen notice that instead of seeing the icon
associated with the item type of each item you get the
default 'broken image URL' image of your web browser [*]
[*] In non-Debian package installs, the 'href' property
of the item type icon's <img> tag should start with
'/opac-tmpl/bootstrap/itemtypeimg'
5) Apply this patch, restart Plack and refresh the page.
The item type icon should now be displayed correctly.
KTD and Koha Sandboxes users: To verify the patch has
worked, you should right-click on the item type icon and
click 'Inspect': the 'href' property of the <img> tag
should now start with: '/intranet-tmpl/prog/img/itemtypeimg'
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Rebecca Coert <rcoert@arlingtonva.us>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
If some holds are overridable, and AllowHoldPolicyOverride is enabled, Koha
used to "flag" each holdable item to let librarians know the hold could not
normally be placed. In 22.05 up to current master as of this writing, no
warning is displayed.
Test Plan:
1) Set one circ rule to allow 0 holds
2) For Library A, set "Hold pickup library match" to "item's hold group"
3) Enable AllowHoldPolicyOverride
4) Set ReservesControlBranch to "item's home branch"
5) Create a record with an item for Library A, one for Library B, and one for Library C
This should create a scenario where A's item cannot be held, and B and C's items must be overridden
6) Note you get the "Cannot place hold" but can place those holds anyway without a "warning" sign
7) Apply this patch
8) Restart all the things!
9) Reload the page, you should now see the warning icons!
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Since we are not in a loop or using this multiple times it's simple to
do it this way, helps with changing the template code in the future
too since if we want to remove this syspref variable we know it is
only used in this one particular place.
To test:
1) Grep for reserve_in_future and make sure there are no matches
after applying this patch
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
If you grep koha-tmpl/intranet-tmpl/prog/en for those you will see
there are no references for those.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch replaces the call to GetTransfers in reserve.pl with the
get_transfer method available from the Koha::Item object
Test plan
1/ Place a reserve on an item at a different branch
2/ Trigger the transfer of the item
3/ Check the reserves page for the display of the current transfer
status
4/ Apply patch
5/ Repeat step 3
Rebased-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The idea rely on the KohaDates TT plugin for the date formatting. We
should not have any output_pref calls in pl or pm (there are some
exceptions, for ILSDI for instance).
Also flatpickr will deal with the places where dates are inputed. We
will pass the raw SQL value (what we call 'iso' in Koha::DateUtils), and
the controller will receive the same value, no need to additional
conversion.
Note that DBIC has the capability to auto-deflate DateTime objects,
which makes things way easier. We can either pass the value we receive
from the controller, or pass a DT object to our methods.
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
On the staff side behaviour differs for default pickup location when placing a hold or
placing an overridden hold. Additionally, the behaviour has changed betwee master and stables
We should provide a consistent default, and allow the library to specify their choice
Note this only affects staff client as there is only a single dropdown on OPAC and it is not
tied to items
To test:
1 - Apply patch
2 - Update database
3 - Find a record with items from various branches, and at least one with a different home/holding branch
4 - Ensure there is an item that requires override to hold, and AllowHoldPolicyOverride is enabled
4 - Attempt to place hold
5 - Confirm all dropdowns default to logged in library
6 - Set DefaultHoldPickupLocation to item's home branch
7 - Refresh and confirm all dropdowns match item home library except biblio level hold - still logged in library
8 - Set DefaultHoldPickupLocation to item's holding branch
9 - Refresh and confirm defaults
10 - Mark one of the items holding library as 'not a pickup location' in Admin->Libraries
11 - Refresh and confirm dropdown is now empty for that item
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch does a few things:
1 - Adds itemtype not for loan status to display
2 - Adds a conditional to display notforlaon status as the reason a hold cannot be placed
3 - Seperates the lower 'Place hold(s)' buttons for single and multi holds into two template sections
4 - Handles the case where all bibs in a multi hold have no items available
5 - Disables the button for single hlds when all items are unavailable
To test:
1 - Find or create a record with all items of itemtype marked 'notforloan'
2 - Attempt to place single hold on this record from staff client
3 - See one disab;ed button, one enabled 'Place holds' button
4 - Click 'Place holds' - hold placed
5 - Cancel hold
6 - Place multiple holds with some bibs that can be held, and this one that cannot
7 - Notice message that 'Cannot place hold on some items'
8 - Click 'Place holds' - hold is generated for the notforloan bib
9 - Apply patch
10 - Place single hold
11 - Note you now see not for loan status on items
12 - Note the red x also includes message abnout not for loan status
13 - Note the 'Place hold' button is disabled
14 - Attempt multi hold
15 - Message now includes "No items available: One or more records have no items that can be held"
16 - Click 'Place holds'
17 - Above still places the hold - this is for a followup patch
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
In this patch we want to reuse what has been done in the previous bug
report to search patrons using the REST API route.
The code is mainly in members/search.tt, for all the patron searches
that "add" or "select" a patron (popup windows).
The patron search for holds is a bit different, we don't want to open a
popup window.
We are moving to code to an include file (patron-search.tt) to make it
reusable easily.
Note that we are improving how the patron's addresses are displayed, and
provide a JS equivalent to the TT includes files.
Test plan:
Search for patrons from the "Place a hold on" view.
You should see the same view as behaviour, with more filters.
Signed-off-by: Séverine Queune <severine.queune@bulac.fr>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
See recalls on Intranet
- old recalls (all inactive recalls)
- recalls queue (all active recalls) - cancel, expire, revert waiting status, multiple cancel, mark overdue
- recalls to pull (available but not yet waiting) - cancel
- recalls awaiting pickup (awaiting pickup, awaiting pickup more than RecallMaxPickUpDelay days) - expire, revert waiting status
- overdue recalls (overdue to be returned) - cancel, multiple cancel
- biblio recalls tab (all active recalls relevant to this bib) - cancel, expire, revert waiting status, mark overdue
- patron recalls tab (all active recalls relevant to this patron) - cancel, expire, revert waiting status, mark overdue
- patron recalls history tab (all recalls relevant to this patron) - cancel, expire, revert waiting status, mark overdue
- log viewer
and the general circulation of recalls
== TEST PLAN FOR RECALLS ==
ADMINISTRATION
1. Apply all patches
2. Run database updates, update schema files and confirm everything applies cleanly
3. Run tests and confirm everything passes:
t/db_dependent/Koha/Recall.t
t/db_dependent/Koha/Recalls.t
t/db_dependent/Stats.t
t/db_dependent/Circulation/CalcFine.t
t/db_dependent/Koha/Item.t
t/db_dependent/Koha/Biblio.t
t/db_dependent/Koha/Patron.t
t/db_dependent/XSLT.t
t/db_dependent/Search.t
t/db_dependent/Holds.t
t/db_dependent/Circulation/transferbook.t
t/db_dependent/Circulation.t
4. Go to Administration -> system preferences. Find the UseRecalls system preference. It should be DISABLED. Confirm RecallsMaxPickUpDelay is set to 7 by default.
5. Go to Administration -> circulation rules. Confirm there are no recalls circulation rules showing.
6. Test a few circulation flows: checking out, placing a reserve, checking in, fulfilling a reserve, etc. Confirm everything works as normal.
7. Go to Administration -> system preferences. Enable the UseRecalls system preference.
8. Go to Administration -> circulation rules. Set the following rules:
Recalls allowed (count) = 0
Recalls per record (count) = 0
On shelf recalls allowed ( If any unavailable / If all unavailable ) = If any unavailable
Recall due date interval (days) = 3
Recall overdue fine amount = (something different to your normal fine amount)
Recall pickup period (days) = 1
Throughout your testing, try with different combinations of these rules and itemtype / branchcode / categorycode. Also try with null values. Keep the circulation rules open in another tab so you can refer to and update these easily. You should also have at least one other tab open for the staff client, and a third tab open for the OPAC, for ease of testing.
9. Go to your account -> More -> Set permissions. Confirm the recalls permission is checked.
10. Set up a test user with OPAC login details (Borrower A). This could also be your own user, as long as you have OPAC login access.
11. Set up a test record (Biblio A) with at least two items (Item A and Item B) of the same item type (or an item type with the same recall circ rules).
PLACING A RECALL
12. Log in to the OPAC as Borrower A. Do a catalogue search with a term that will return multiple results, including Biblio A.
13. Click on Biblio A.
14. Notice there is a 'Place recall' button on the sidebar menu. Click this button. There will be a message saying that there are no items to recall - this is because all items are available.
15. Check out Item A to another borrower (Borrower B).
16. Refresh the 'Place recall' page. You will still NOT be able to place a recall - this is because Recalls allowed = 0 and Recalls per record = 0.
17. Edit the circulation rules to have the following values:
Recalls allowed (count) = 1
Recalls per record (count) = 1
18. Refresh the 'Place recall' page. You will now see the form to place a recall.
BIBLIO-LEVEL RECALL, NO TRANSFER
19. Place a biblio-level recall.
Pickup location: Branch A, the set branch when you are logged into the staff client
Recall not needed after (expiration date): whatever you want
Select 'recall next available item'
Click confirm
20. Confirm the recall is placed successfully. Confirm that the new due date displayed is correctly calculated to be today's date, plus 3 days (taken from the 'recall due date interval' circ rule)
21. In the staff client, look at Borrower B's account, and go to their Notices tab. Confirm they have received a 'Notification to return recalled item' notice.
22. Look at Borrower B's checkouts table. Notice the due date for their checkout has been adjusted, and there is now a note to say that the item was recalled and the due date adjusted.
23. Log in to the OPAC as Borrower B and go to your summary tab. Notice there is a note under their checkout to say the item had been recalled.
24. Log out of the OPAC and log back in as Borrower A.
25. Go to your summary tab. Confirm there is a Recalls tab with a count of 1.
26. Cancel the recall using the button. Confirm it cancels and the Recalls tab disappears.
27. Do a catalogue search with a term that will return multiple results, including Biblio A.
28. When the results load, notice there is a 'Place recall' button next to the 'Place hold' button. Click this 'Place recall' button.
29. Notice you are redirected straight to the form to place a recall.
30. Place a biblio-level recall again, following the steps in Step 19.
31. Go to your recalls history tab. Notice your first cancelled recall shows here.
32. Cancel the recall you just created, using the button. Confirm it cancels and you are redirected to your summary tab.
33. In the staff client, enable the UseCourseReserves system preference.
34. Go to the main menu, click Course Reserves.
35. Add a new course. (You may also have to define an authorised value for DEPARTMENT.)
36. Add Item A as a reserve to this course.
37. View Course Reserves in the OPAC. Click the course you just created.
38. Notice the reserve has a Recall button underneath it's 'Checked out' status. Click this button.
39. Place a biblio-level recall again, following the steps in Step 19.
40. Click the 'Place recall' link in the breadcrumbs.
41. Notice there is a message saying that you have reached the max number of recalls on this record. This is because Recalls allowed = 1 and Recalls per record = 1.
42. Edit the circulation rules to have the following values:
Recalls allowed (count) = 10
Recalls per record (count) = 5
43. Refresh the 'Place recall' page. You will now see the form to place a recall.
44. Create another test record (Biblio B) with at least one item (Item C).
45. Find this record on the OPAC and place a biblio-level recall again, following the steps in Step 19.
46. In the staff client, go to Circulation -> Old recalls. You should be able to see your two cancelled recalls.
47. Go to Circulation -> Recalls queue. Your current recalls should show here.
48. Use the 'Select all' checkbox to select all recalls.
49. Cancel the recalls using the 'Cancel selected recalls' button.
50. Go to the OPAC and place a biblio-level recall on Biblio A again, following the steps in Step 19.
51. In the staff client, check in Item A, which should still be checked out to Borrower B.
52. A box should pop-up asking you to confirm Borrower A's recall. Click ignore.
53. Click the link to go view Biblio A's details in the catalogue.
54. Click the recalls tab. Notice Borrower A's recall is displayed, and shows it is still Requested (has not been confirmed waiting).
55. Check in Item A again. This time, confirm the recall as waiting using the "Confirm recall" button.
56. Go to Borrower A's Notices tab. Confirm there is a notice "Recalled item awaiting pickup".
57. Go to Borrower A's checkouts. Notice there is a recalls tab. Confirm the recall is showing as "Ready for pickup".
58. Click the 'Actions' dropdown. Click the "Revert waiting" button. The page should show a message that the waiting status has been reverted, without reloading.
59. This time, check in Item B. The recall confirmation box should show again, because this a biblio-level recall that any recallable item under Biblio A can fill. Click the "Print slip and confirm" button.
60. Check the slip that is generated. Confirm it contains Borrower A's correct details, and the details of the recall are correct.
61. Go to Circulation -> Recalls awaiting pickup. Confirm the recall is now waiting and shows in this list.
(You could also try this with Item B having a different item type to Item A, and circ rules not allowing Item B's item type to have recalls. When checking in Item A, it should not trigger the recall box).
62. Go to Borrower A's checkouts. Check out Item B.
63. Confirm the checkout is successful and the recall is removed from the Recalls tab.
64. Go to Circulation -> Old recalls. The fulfilled recall should show.
65. Check in Item B.
BIBLIO-LEVEL RECALL, TRANSFER REQUIRED
66. Check out Item A to Borrower B.
67. Log in to the OPAC as Borrower A.
68. Find Biblio A and place a biblio-level recall.
Pickup location: Branch B, a different branch from your logged in branch. This recall will require a transfer.
Recall not needed after (expiration date): whatever you want
Select 'recall next available item'
Click confirm
69. In the staff client, check in Item A at Branch A. Notice the box that pops up shows that a transfer is required.
70. Click "confirm recall and transfer" and confirm the transfer.
71. Go to your account and click the Recalls tab.
72. Confirm the recall status now shows the item is in transit to Branch B.
73. In the drop-down top-right of your window, select 'Set library'.
74. Set your library to Branch B.
75. Go to Circulation -> Transfers to receive. Notice that the recall is showing here.
76. Click 'Cancel transfer'.
77. Go to Circulation -> Recalls queue
78. Confirm the recall status has been reverted to Requested.
79. Set your library back to Branch A.
80. Check in Item A and trigger the transfer.
81. Set your library back to Branch B.
82. Check in Item A at Branch B.
83. When the 'Recall found' box pops up, click Ignore.
84. Go to Circulation -> Recalls to pull. The recall should show here, with a button to "Cancel recall and return to: Branch A"
85. Click the button to cancel the recall.
86. Repeat Steps 66-70.
87. Check in Item A at Branch B. Confirm the recall as waiting.
88. Check out Item A to Borrower A to fulfill the recall.
89. Set your library back to Branch A and check in Item A.
ITEM-LEVEL RECALL, NO TRANSFER
90. Go to Administration -> circulation rules. Set the following rules:
On shelf recalls allowed ( If any unavailable / If all unavailable ) = If all unavailable
91. Check out Item A to Borrower B.
92. Log in to the OPAC as Borrower A and go to Biblio A.
93. Click the 'Place recall' button. Confirm there is a message that there are no items to recall. This is because On shelf recalls allowed = If all unavailable, and there is still one item (Item B) available.
94. In the staff client, edit Item B to have a withdrawn, item lost or not for loan status.
95. Refresh the 'Place recall' page. Confirm you can now see the form to place a recall.
96. Place an item-level recall.
Pickup location: Branch A.
Recall not needed after (expiration date): whatever you want
Select 'recall a specific item'
Item B will not be selectable, and Item A should be selected by default.
Click confirm
97. In the staff client, edit Item B and remove the lost or missing status.
98. Check in Item B. Confirm the recall box does not pop up, because it cannot fill the item-level recall.
99. Check in Item A. Confirm the recall as waiting.
100. Go to Circulation -> Recalls awaiting pickup
101. Expire the recall. Confirm it expires as expected.
ITEM-LEVEL RECALL, TRANSFER REQUIRED
102. Repeat steps 91 to 95.
103. Place an item-level recall.
Pickup location: Branch B, we will require a transfer.
Recall not needed after (expiration date): whatever you want
Select 'recall a specific item'
Item B will not be selectable, and Item A should be selected by default.
Click confirm
104. In the staff client, check in Item A. Confirm the recall and trigger the transfer.
105. Set your library to Branch B and check in Item A.
106. Confirm the recall as waiting.
107. Check out Item A to Borrower A and fulfill the recall.
108. Set your library back to Branch A and check in Item A.
CRONJOBS: EXPIRING RECALL
109. Check out Item A to Borrower B.
110. Log in to the OPAC as Borrower A. Place a recall (any level) on Biblio A.
111. In your terminal, enter mysql and edit the expiration date of your recall to be before today
UPDATE recalls SET expirationdate = NOW()-2 WHERE recall_id = X;
112. Run the expiry cronjob from within your shell
perl misc/cronjobs/recalls/expire_recalls.pl
113. Go to Borrower A's account and go to the Recalls history tab
114. Confirm the recall has been expired because the current date surpassed the specified expiration date
115. Check out Item A to Borrower B.
116. Log in to the OPAC as Borrower A. Place a recall (any level) on Biblio A.
117. In the staff client, check in Item A and confirm the recall as waiting.
118. In your terminal, enter mysql and edit the waiting date of your recall to be before today
UPDATE recalls SET waitingdate = NOW() - interval 5 day WHERE recall_id = X;
119. Run the expiry cronjob from within your shell
perl misc/cronjobs/recalls/expire_recalls.pl
120. Go to Borrower A's account and go to the Recalls history tab
121. Confirm the recall has been expired because the recall had been waiting for more days than the Recall pickup period
122. Go to Administration -> circulation rules. Set the following rules:
Recall pickup period (days) = 0
123. Set the RecallsMaxPickUpDelay system preference = 1.
124. Check out Item A to Borrower B.
125. Log in to the OPAC as Borrower A. Place a recall (any level) on Biblio A.
126. In the staff client, check in Item A and confirm the recall as waiting.
127. In your terminal, enter mysql and edit the waiting date of your recall to be before today
UPDATE recalls SET waitingdate = NOW()-2 WHERE recall_id = X;
128. Run the expiry cronjob from within your shell
perl misc/cronjobs/recalls/expire_recalls.pl
129. Go to Borrower A's account and go to the Recalls history tab
130. Confirm the recall has been expired because the recall had been waiting for more days than the RecallsMaxPickUpDelay syspref
CRONJOBS: OVERDUE RECALL
131. Check out Item A to Borrower B
132. Log in to the OPAC as Borrower A. Place a recall (any level) on Biblio A.
133. In your terminal, enter mysql and edit the due date of the checkout to Borrower B to be before today
UPDATE issues SET date_due = NOW()-2 WHERE issue_id = X;
134. Run the overdue cronjob from within your shell
perl misc/cronjobs/recall/overdue_recalls.pl
135. Go to Circulation -> Overdue recalls
136. Confirm your recall is showing here now as the recall has been marked Overdue
CIRCULATION
137. Check in Item A.
138. When the recall box pops up, click Ignore.
139. Check out Item A to Borrower B. You should see a yellow confirmation box, saying that another borrower has recalled the item you are trying to check out.
140. Click "No don't check out" and confirm the item isn't checked out and the recall remains.
141. Repeat Step 139.
142. Click "Yes check out" and confirm the item is checked out and the recall remains.
143. When Borrower B's checkout table loads, confirm that you cannot renew or check in the item from the Checkouts table because there is a 'Recalled' link which takes you to the recalls tab for that biblio.
144. Repeat Steps 137-139.
145. Select "Cancel recall" and click "Yes check out" and confirm the item is checked out and the recall has been cancelled.
146. Log in to the OPAC as Borrower A. Place a recall (any level) on Biblio A.
147. Check in Item A. Confirm the recall as waiting.
148. Check out Item A to Borrower B. You should see a yellow confirmation box, saying that that another borrower has recalled the item that you are trying to check out.
149. Select "Revert waiting status" and click "Yes check out" and confirm the item is checked out and the recall status has reverted to requested.
OTHER
150. In your terminal, enter mysql and edit the due date of the checkout to Borrower B to be before today
UPDATE issues SET date_due = NOW()-2 WHERE issue_id = X;
151. Go to Borrower A's recalls and click the Actions dropdown.
152. Click "Mark as overdue" and confirm the recall is marked as overdue manually.
153. Go to Tools -> Log Viewer. Check only the Recalls module, and leave all other parameters, and click Submit.
154. Confirm all of the recalls actions that have been made are correctly logged.
Note: recalls messaging preferences are introduced in Bug 23781.
The recall feature is fully documented at: https://wiki.koha-community.org/wiki/Catalyst_IT_Recalls
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch tackles a very specific scenario. Calling split(...,
CGI::param) makes it be called in list context. The split docs say:
split /PATTERN/,EXPR,LIMIT
this means the first CGI param will be used as EXPR and the second one
as LIMIT, which is wrong anyway. So the fix is to just force scalar
context.
To test:
1. Not sure, just make sure nothing breaks when using the scripts in the
browser.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This removes the need to handle single and multiple cases separately,
thus removing bunch if-else cases and simplifying our code. This
coding style is also in line with our other .pl scripts.
To test:
1) Make sure placing a hold still works from the following pages:
/cgi-bin/koha/catalogue/detail.pl?biblionumber=XXX
/cgi-bin/koha/catalogue/search.pl?q=a
/cgi-bin/koha/virtualshelves/shelves.pl?op=view&shelfnumber=XXXX
/cgi-bin/koha/clubs/clubs.pl (create a new club and add a patron
there and through the clubs.pl create a hold to a bib)
Signed-off-by: Hayley Pelham <hayleypelham@catalyst.net.nz>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Martin Renvoize
Jonathan Druart
Nick Clemens
Tomas Cohen Arazi
Lucas Gass
emilyrose
Aleisha Amohia
CJ Lynce
Koha Development Team
Sam Lau
Emily Lamancusa
David Cook
Julian Maurice
Thibaud Guillot
Lari Taskula
David Gustafsson
Andreas Roussos
Kyle Hall
Joonas Kylmälä
Martin Renvoize
Joonas Kylmälä