GetReserveFee was removed as part of the migration to circulation
rules-based hold fees, but reserve/request.pl still imported and
used it, causing compilation errors.
This patch replaces the two usages of GetReserveFee with the modern
approach using Koha::Item->holds_fee($patron), matching the
implementation in opac-reserve.pl.
The fee is calculated by iterating through available items and using
the first non-zero fee found, which provides backward compatibility
with the legacy reserve_charge template variable.
This implementation uses ReservesControlBranch to determine which
branch's circulation rules apply (either item home library or patron
home library), consistent with the existing Koha policy framework.
Test plan:
1. Apply patch
2. Verify reserve/request.pl compiles: perl -wc reserve/request.pl
3. Navigate to staff interface holds page with patron and biblio
4. Verify hold fee is displayed correctly if configured in
circulation rules
5. Place a hold and verify fee is charged correctly
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Generated using
`perl misc/devel/tidy.pl --perl`
Signed-off-by: Martin Renvoize <martin.renvoize@openfifth.co.uk>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This patch adds hold fee information display in the staff client's hold
request interface, bringing it to feature parity with the OPAC.
The OPAC already shows patrons the fee that will be charged for placing
a hold, but the staff client did not display this information when staff
place holds on behalf of patrons. This creates a transparency gap where
staff cannot inform patrons about potential charges.
Changes:
- Import GetReserveFee function in reserve/request.pl
- Calculate reserve charges for each biblio record
- Display fee information in both single and multi-hold interfaces
- Show appropriate messaging based on HoldFeeMode system preference
- Use consistent formatting with currency display
Test Plan:
1. Set up hold fees:
- Go to Administration > Patron categories
- Edit a patron category and set a "Hold fee" (e.g., 1.00)
- Ensure HoldFeeMode system preference is set (default: "only if all
items are checked out and the record has at least one")
2. Test single hold with fee display:
- Go to a bibliographic record
- Click "Place hold"
- Find a patron from the category with hold fees configured
- Verify fee information displays after the title:
* Shows "Note: [Patron Name] will be charged a hold fee of $1.00
for placing this hold" when the HoldFeeMode is set to "any time
a hold is placed"
* Or "...when they collect this item" if HoldFeeMode is set to "any
time a hold is collected"
3. Test multi-hold with fee display:
- Ensure 'DisplayMultiPlaceHold' preference is set to 'Enable'
- Search the catalog
- On the search results page, select multiple biblios and click
'Place hold'
- Search for the same patron
- In the confirmation table, verify each record shows:
* "Hold fee: $1.00 (charged when placed)" in the Information column
* Or "(charged when collected)" based on HoldFeeMode
4. Test no fee display:
- Repeat tests with a patron from a category with no hold fee
- Verify no fee information is displayed
5. Test different HoldFeeMode settings:
- Change HoldFeeMode system preference to 'any_time_is_collected'
- Verify messaging changes to "when they collect this item"
- Test with 'not_always' mode and verify fee only shows when appropriate
6. Verify existing functionality:
- Ensure hold placement still works normally
- Verify all other hold interface elements remain unchanged
- Test that holds are properly placed with or without fees
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This patch adds a new parameter to ModReserve: skip_fix_priority
The page for altering priority ensures each hold has a unique rank, so doesn't allow for setting two
holds to the same rank, so we don't need to reorder everything until the end (in case of some cancellations etc)
This patch also makes FixPriority exported and updates the name as it is already called in a few places outside of
C4:Reserve
To test:
1 - Place many holds on a record, 50 - 150
https://github.com/kidclamp/handy-koha-script/blob/main/randhold.pl
2 - View the record in the staff interface:
http://localhost:8081/cgi-bin/koha/catalogue/detail.pl?biblionumber=312
3 - Click on the 'Holds' tab
4 - Adjust the priority of several holds using the dropdowns
5 - Open the network tab in the browser console (F12) to view the timing
6 - Click 'Update hold(s)' and note the time
7 - Apply patch, restart all
8 - Repeat
9 - Confirm timing is better and numbering updates correctly
10 - Sign off!
Note: The script adds holds that may be marked as 'lowestPriority' these will always all group at the bottom of the record
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jan Kissig <bibliothek@th-wildau.de>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
To test:
1 - Add a bunch of holds to a record
https://github.com/kidclamp/handy-koha-script/blob/main/randhold.pl
2 - Enable profiling:
https://wiki.koha-community.org/wiki/Profiling_with_Devel::NYTProf#NYTProf_with_Plack
3 - Browse to the record and load the holds table
4 - View the flame graph for the request like instructions in #2
5 - Note that Koha::Hold->borrower and Koha::Hold->item take a lot of time
6 - Apply patch, restart all
7 - Reload page
8 - Reload flame graph
9 - Note time for fetching borrowers and items is significantly reduced
10 - Sing off!
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@openfifth.co.uk>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
The patch 'Move creation of hold group into Patron class' is
moving the creation of the hold group logic to the Patron.pm class file
but it didn't remove all the obsolete code.
This is fixed here.
Signed-off-by: Anneli <anneli.osterman@koha-suomi.fi>
Signed-off-by: Andrew Fuerste Henry <andrew@bywatersolutions.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Refactor: Update controller logic to make use of patron->create_hold_group
This ensures consistency when creating a new hold group for a patron,
regardless if on the Staff UI or REST API
Signed-off-by: Anneli <anneli.osterman@koha-suomi.fi>
Signed-off-by: Andrew Fuerste Henry <andrew@bywatersolutions.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This patch implements proper override logging for holds following the
Alternative implementation pattern used for checkouts and renewals.
Instead of just removing the orphaned logging code from the original
Bug 9762 implementation, this patch properly implements override logging
by updating AddReserve to accept and log override information, similar
to how AddIssue handles confirmations and forced overrides.
Changes:
C4/Reserves.pm:
- Added JSON qw(to_json) import
- Updated AddReserve to accept confirmations and forced parameters
- Enhanced the existing logaction call to include override information
in JSON format when overrides are present
- Log format matches the Alternative implementation pattern:
* hold ID
* branchcode
* biblionumber
* itemnumber
* confirmations array
* forced array
Koha/REST/V1/Holds.pm:
- Added confirmations array building in the add() method
- Pass 'HOLD_POLICY_OVERRIDE' confirmation when override_all is true
- Pass confirmations parameter to AddReserve call
reserve/request.pl:
- Removed orphaned original implementation logging code
- Removed unused variables and imports (message, @message, user, etc.)
- Removed C4::Log import
koha-tmpl/intranet-tmpl/prog/en/includes/action-logs.inc:
- Added 'HOLD_POLICY_OVERRIDE' case to translate_log_override block
- Displays as "Hold policy override" in log viewer
koha-tmpl/intranet-tmpl/prog/en/modules/tools/viewlog.tt:
- Added JSON display handling for HOLDS module (similar to CIRCULATION)
- Displays hold ID, biblionumber, and optional itemnumber with links
- Shows forced and confirmation overrides using translate_log_override
This ensures hold overrides are logged consistently with the Alternative
implementation pattern, providing proper audit trails for policy overrides
that are properly displayed in the log viewer.
Signed-off-by: Andrew Fuerste Henry <andrew@bywatersolutions.com>
Signed-off-by: Paul Derscheid <paul.derscheid@lmscloud.de>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Brendan Lawlor <blawlor@clamsnet.org>
Signed-off-by: Martin Renvoize <martin.renvoize@openfifth.co.uk>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Test plan:
1. APPLY PATCH, updatedatabase, restart_all
2. Have two staff members. 1. Superlibrarian, 2. Staff with new permission to `alter_hold_targets`
3. Now place some holds on different record, you'll want some item level holds and some record level holds.
4. After placing some holds go to a record with some holds on it.
5. Go to the holds tab (reserve/request.p)
6. You should notice a disabled 'Move selected (0)' button, next to 'Cancel selected (0)'
7. Select some holds to move, ensure that the number updates accordingly. ( Move selected (2) )
8. When you click the button you should see 2 options, 'Item level holds to a different item' and 'Record level holds to a different record'
9. Clicking on either should bring up a modal with information about the holds you selected to move.
10. If you have item level holds and you select 'Item level holds to a different item' those holds should appear pre-checked.
11. If you have item level holds and you select 'Record level holds to a different record' those holds checkboxes should be disabled by default, you should see the 'Problem' as 'Cannot move a waiting or record level hold'
12. If you are moving a item level hold you should see a searchbar labeled 'Enter the item barcode of new hold target:'.
13. Enter a full or partial barcode and click search
14. You should see your item, if it exists.
15. Check 'Move all selected item level holds to this item', once you do so the yellow 'Move selected holds' button should be enabled.
16. Click 'Move selected holds', the hold should be moved.
17. You should see a message like " Moved the following holds:
Hold ID: 1854 - Moved from The Arden edition of the works of William Shakespeare. to The Arden edition of the works of William Shakespeare."
19. Do steps 12 - 17 again, but with a record level hold.
20. Now make or have many holds on a specific target record to test priority. Make note of the current priority
21. Now move a hold on to that record, testing both item and record level holds.
22. Now on the target record review the priority. The holds originally on the record should not have changed. The hold you move should now have the lowest priority on the record.
23. Check the original record, if a hold was moved all other priority should have been adjusted correctly. FOr example, if the hold you moved was 3 of 4 then the others should have adjusted priority of 1 2 3 now.
24. Turn on HoldsLog if it is disabled.
25. Move some holds, both item and record ones, and review the logs after each one. There should be a correct MODIFY entry for each move.
26. Make an item with a hold on it as damaged and turn on AllowHoldsOnDamagedItems. Try to move the hold, you should get an error telling you that the target item is damaged.
27. Now login as the non-superlibrarian patron from step 2. If they have the `alter_hold_targets` permission they should see the 'Move selected' button.
28. Revoke the `alter_hold_targets` permission. The button should not appear now.
Signed-off-by: Pedro Amorim <pedro.amorim@openfifth.co.uk>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This patch allows you to save commands that have been overridden by someone.
The patch has been updated but is not yet completed. Tests 10, 13, 14, and 17 are still not functional. Tests 15 and 16 need to be fixed as they do not display the barcode. All other tests should be functional.
To test:
--After each step, a message will be displayed in the action_logs table and in Tools > Log viewer --
Circulation -- Checking out
1) Check out an item that is age-restricted (AgeRestrictionOverride syspref)
2) Check out an item that has a “not for loan” status (AllowNotForLoanOverride syspref)
3) Check out an item that has a “lost” status (IssueLostItem syspref)
4) Check out an item to a patron who has reached the checkout limit (AllowTooManyOverride syspref)
5) Check out an item to a patron who is not allowed to borrow this item type
6) Check out an item to a patron who has unpaid fines (AllFinesNeedOverride and/or AllowFineOverride + noissuescharge sysprefs)
7) Check out an item on hold for someone else
8) Check out an item on hold ready for pickup by someone else
9) Check out an item already checked out to someone else (AutoReturnCheckedOutItems syspref)
10) Check out to a patron who has restrictions
Circulation -- Checking in
11) Ignore a hold upon check in
12) Ignore a hold and transfer upon check in
Circulation – Renewing
13) Renew an item on hold for someone else (AllowRenewalOnHoldOverride syspref)
14) Renew an item that has reached the maximum number of renewals (AllowRenewalLimitOverride syspref)
Holds
15) Place a hold for a patron who is not allowed to place this item type on hold (AllowHoldPolicyOverride syspref)
16) Place a hold for a patron who has reached the maximum number of holds
17) Place an item-level hold when rules dictate that this is not allowed (In circulation rules put "On shelf holds allowed" to "If any unavailable")
Sponsored-by: Solutions inLibro inc. <https://inlibro.com/>
Signed-off-by: Martin Renvoize <martin.renvoize@openfifth.co.uk>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
It can be useful, for instance, if a library has the same title from
different publishers (so 1 title but several biblio records) but the
user only wants a copy of the book, regardless of the publisher.
Test plan:
0. Run updatedatabase.pl and misc/devel/update_dbix_class_files.pl
1. Go to intranet search, display some results, click on some checkboxes
and click on 'Place hold' button at the top of the results.
2. Search for a patron
3. Check the 'Treat as hold group' checkbox
4. Click on 'Place hold'
5. In the next screen you should see all the holds you placed with the
additional text '(part of a hold group)' in Details column.
6. Click on the "hold group" link. A modal window should appear with
the content of the hold group (a list of holds)
7. Check in an item of one of the reserved biblios and confirm the hold
8. The hold status is changed to Waiting, and all other holds are deleted.
The other holds will also be removed from the holds queue.
9. Confirm tests pass
- t/db_dependent/Koha/Holds.t
- t/db_dependent/Reserves/HoldGroup.t
Note: the "hold group" link is displayed in the following pages:
- reserve/request.pl
- circ/circulation.pl
- members/moremember.pl
- circ/pendingreserves.pl
- circ/view_holdsqueue.pl
Note: A hold group is counted as only one hold
Sponsored-by: Catalyst IT
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Pedro Amorim <pedro.amorim@openfifth.co.uk>
Signed-off-by: Andrew Fuerste Henry <andrew@bywatersolutions.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This patch updates all existing calls to the renamed method throughout
the codebase to maintain compatibility.
Changes:
* Updated C4::Circulation calls to use revert_found()
* Updated C4::Reserves calls to use revert_found()
* Updated test files to use revert_found()
* Maintained all existing functionality and behavior
All existing functionality is preserved - this is purely a method
name change to reflect the expanded capability.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Emily Lamancusa <emily.lamancusa@montgomerycountymd.gov>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@openfifth.co.uk>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
When no item is available, with AllowHoldPolicyOverride, a triangle appears on
each item to be forced, but if you choose “next item available” without
having any item available, you won't see anything. Additionally, the top
warning message about "No items are available" does not show when
'AllowHoldPolicyOverride' is set to allow and no items are available
(e.g. withdrawn, lost, damanged, depending on settings)
This patch corrects an error in request.pl where no incrementation of
$num_override happens when an item is forced. This causes the warning
triangle to appear on the 'Place hold' button on the bib level. The top
warning message is restored as well.
Finally, this patch changes the display of the fa-warning-triangle icon on the
'Place hold' buttons to increase contrast with the button color, making it
easier to see and increasing accessibility.
Test plan:
1) Set circulations rules for specific category and/or itemtype (for example 1
hold allowed for staff on books). Set AllowHoldPolicyOverride on "Allow".
2) Search for a book biblio with multiple items, and set each item to a
non-circulating status (withdrawn, lost, etc.)
3) Place a hold for a staff category patron for this bib record.
4) Normally you will see triangles on each item on specific section but you can
force it. When you just select the next item available none triangle and
none alert showing.
5) Apply this patch and restart_all.
6) Refresh your browser page.
7) Normally now there is a triangle into 'Place hold' submit button and an
alert message appears on the top of the page. The triangle is also more
visible.
8) Test other hold limits, such as max holds per record, to ensure the
appropriate top alert message appears and the triangle alert appears on
the 'Place hold' button.
Co-authored-by: Thibaud Guillot <thibaud.guillot@biblibre.com>
Sponsored-by: BibLibre
Sponsored-by: Westlake Porter Public Library <https://westlakelibrary.org>
Signed-off-by: Emily Lamancusa <emily.lamancusa@montgomerycountymd.gov>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This commit is generated using:
% perl misc/devel/tidy.pl
*within* ktd, to get the same version of perltidy than what will be used
by our CI (currently v20230309).
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
To test:
1) Create multiple patron clubs
2) Find a bib
3) Click Holds, then Clubs
4) Without entering any text, press the search button
5) Note that the list of clubs is not shown.
6) Apply patch and restart_all
7) Press the search button again, the entire list of clubs should be shown.
8) Ensure original search functionality still works
Signed-off-by: Roman Dolny <roman.dolny@jezuici.pl>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
We can easily replace the calls by ->suspend_hold and ->resume.
Test plan:
No behaviour changes expected.
Confirm that you can still suspend and resume holds (OPAC+staff)
Signed-off-by: Olivier V <olivier.vezina@inLibro.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
The rank parameter is passed per biblio record, not per item. When
placing multiple item-level holds on one bib record, only $rank[0] is
defined.
To test:
1. System preference and circulation rule setup
i. Set the system preference DisplayMultiItemHolds to Enable
ii. Edit the default circulation rule to allow 5 holds per record
2. Find or create a bib with 4 or more items
3. Place several bib-level holds
4. Place 4 or more item-level holds at once on that same record
i. Search for a patron to place the holds for (not one of the
patrons you used in step 3)
ii. Select "Hold a specific item"
iii. Check the checkboxes for 4 or more items
iv. Click Place hold
--> Note that one of the new item-level holds is at the end of the list
as it should be, but the rest are out of order
5. Cancel the item-level holds from step 4
6. Apply patch and restart_all
7. Repeat step 4
--> All the new item-level holds are now at the end of the list
Signed-off-by: Roman Dolny <roman.dolny@jezuici.pl>
Signed-off-by: Paul Derscheid <paul.derscheid@lmscloud.de>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch alters the structure of the hold request page to make it clear
that "Hold next available", "Hold item group", and "Hold specific item" are
mutually-exclusive options.
While there is some duplication from this, it makes the sections easier to read
and allows for more variation in the two forms
To test:
1 - Find a bib with multiple items
2 - Enable item groups and item group holds in system preferences
3 - Load the records detail page
4 - Add an item group on the item groups tab
5 - Select two items and add to the group
6 - Click the 'Holds' tab and search for/select a patron
7 - Confirm the three levels of holds are clear
8 - Confirm checking the radio next to one disables the others
9 - Check 'Hold next available item from an item group'
10 - Do not select an item group
11 - Click 'Place hold' and confirm you are notified of need to select an item group
NOTE: if you are overrirding you may also have an alert that the items cannot normally be put on hold
12 - Click 'Place hold on a specific item' - but do not select an item
13 - Click place hold and confirm there is an alert and you cannot continue
14 - Click 'Hold next available item' and place hold
15 - Hold is successfully placed
16 - Place another hold for the same patron
17 - Only the 'Hold next available item' form is enabled
18 - Confirm you cannot switch hold type
19 - Place hold
20 - Select a new patron and place an item group hold
21 - Select the same patron and place another hold - you are forced to place an item group hold
22 - Select a new patron and place a hold on a specific item
23 - Place a second hold, confirm you can only place it on a specific item
Signed-off-by: hinemoea <hinemoea@inlibro.com>
Signed-off-by: Sam Lau <samalau@gmail.com>
Signed-off-by: Emily Lamancusa <emily.lamancusa@montgomerycountymd.gov>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Not used? Dont import.
Which actually only leaves circ/waitingreserves.pl as the only
'real' caller.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Lisette Scheer <lisette@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Lisette Scheer <lisette@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Test plan:
Confirm that modrequest does no longer insert when pref is off :)
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Pedro Amorim <pedro.amorim@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Test plan:
1) Add a basic circulation rule like : 0 hold allowed on patron category
'A' and set AllowHoldPolicyOverride to 'Allow'
2) Make a hold on a patron belongs to this category
3) Normally you should see a warning on item (override needed) but it's
not the case
4) Apply this patch
5) Refresh and repeat step 2
This patch comes from an alternative patch on the original bug (I'm including
the original test plan for your information) :
(Bug 30687 - alternative patch): Always allow to force hold pickup location
If AllowHoldPolicyOverride is enabled and only some pickup locations are
available, you still have the possibility to force one of the others
pickup locations.
But when there are zero pickup locations available, that is not
possible.
This patch change that by always displaying the list of pickup locations
when AllowHoldPolicyOverride is enabled.
Test plan:
1. Apply patch
2. Disable AllowHoldPolicyOverride
3. Create a biblio B with an item I at library A.
4. Configure this library A to not be a pickup location
5. Add a "Default holds policy by item type" for item I type where "Hold
pickup library match" is "item's home library"
6. Try to place a hold on biblio B
You should not be able to place a hold because there is no valid
pickup locations
7. Enable AllowHoldPolicyOverride
8. Try to place a hold on biblio B
You should now see all valid pickup locations in a dropdown list
(with an exclamation mark in front of each option) with none selected
by default
9. Verify you can place a title-level hold and an item-level hold
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This reverts commit ab93008da7.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
The "biblio" Koha::Biblio object we send from the controller needs to be
accessible from the include files.
To avoid a clash we rename it biblio_info
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Bug 34478: [TO SQUASH] Manual fix - change links to JS form submission - cleanup comments and unused routine - request.pl/.tt
Bug 34478: [TO SQUASH] Manual fix - link to js post and add op to form - request.tt
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch moves code form scripts to a template plguin and unifies the calls
To test:
1 - Add a searchable patron attribute type
2 - Add values to several patrons and test patron searching from
Patrons home
Patrons search results
Holds request screen
Article request screen
Patron search sidebar
3 - Apply patch
4 - Confirm results are the same
Signed-off-by: Janusz Kaczmarek <januszop@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1. Apply patch
2. Add item level hold to a record/item, make sure patron has no other
holds on that record
3. Go to /cgi-bin/koha/reserve/request.pl?biblionumber=xxx where xxx is
the record you placed the hold for
4. Under "Existing holds" table, in "Details" column you should see
"Only item <barcode>" dropdown
5. Select "Next available" from the dropdown
6. Click Update hold(s)
7. Observe dropdown is gone and cell value has changed from
"Only item <barcode>" to "Next available"
8. Cancel the hold and add two item level holds for the same patron
9. Under "Existing holds" table, in "Details" column you should see
"Only item <barcode>", but no select dropdown
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1. Place some holds and go to /reserve/request.pl for that bib.
2. If the reserves.expirationdate is set to today or some date in the past the date does not display in the Flatpickr instance.
3. Change the reserves.expirationdate to sometime in the future, the date displays.
4. Aply patch, restart_all
5. Try steps 2-3 again.
6. This time if the expiration date is in the past you should see it displayed. However it will be uneditable.
7. Make sure holds with a expiration date in the future can still be properly edited.
Signed-off-by: Matt Blenkinsop <matt.blenkinsop@ptfs-europe.com>
Signed-off-by: Christine <chlee@pascolibraries.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
There are several places in the code where we precalculate ItemsAnyAvailableAndNotRestricted to avoid
looping on this routine when calling IsAvailableForItemLevelRequest on a list of items form a biblio
The value of ItemsAnyAvailableAndNotRestricted is only used when there is a circulation rule for
'onshelfholds' with a value of '2' (If all unavailable)
Rather than calculate a value that may never be used, let's cache this value per request when we do
calculate it - and reuse the cached value
To test:
1 - Apply patch
2 - Set circulation rule 'On shelf holds allowed' as 'If all unavailable'
make sure the rule applies to all of the items/patrons you test with
3 - Find a record with two items that are available
4 - Try to place a hold for a patron - not allowed
5 - Check out one item to another patron
6 - Attempt hold - still not allowed
7 - Check out second item to another patron
8 - Attempt hold - allowed!
9 - Apply patch
10 - Cancel and replace hold - it is allowed!
11 - Check in one item, and cancel hold
12 - Place hold - not allowed!
13 - Check in second item
14 - Place hold - not allowed!
15 - prove -v t/db_dependent/Holds/DisallowHoldIfItemsAvailable.t
Signed-off-by: Sam Lau <samalau@gmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch caches the return value of CanItemBeReserved that could
be then returned *on
demand*
We don't want to introduce side-effects hard to catch from this simple
change, so let's return the cache value only from the 2 scripts we are
dealing with.
This patch requests all item values from CanBookBeReserved on request.pl
Before this we either:
- Looped every item to find out that book could not be reserved
- Looped until we found an item that could be reserved, then looped all items to get statuses
In the worst case we avoid double processing a single item, in the best case we avoid double
processing all items (if only last on record is holdable)
To test:
1 - Find a record in staff client with several items
2 - Set AllowHoldsOnDamagedItems to 'Dont allow'
3 - Add a damaged item to record
4 - Set a hold rule to only allow holds form homebranch and ensure record has items from other branches
5 - Setup things to prevent more items from being held
6 - Attempt hold for patron
7 - Note item statuses
8 - Apply patch
9 - Confirm statuses are as they were before
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This is Julian's patch with some extra cleanup to reduce repeated code
If AllowHoldPolicyOverride is enabled and only some pickup locations are
available, you still have the possibility to force one of the others
pickup locations.
But when there are zero pickup locations available, that is not
possible.
This patch change that by always displaying the list of pickup locations
when AllowHoldPolicyOverride is enabled.
Test plan:
1. Apply patch
2. Disable AllowHoldPolicyOverride
3. Create a biblio B with an item I at library A.
4. Configure this library A to not be a pickup location
5. Add a "Default holds policy by item type" for item I type where "Hold
pickup library match" is "item's home library"
6. Try to place a hold on biblio B
You should not be able to place a hold because there is no valid
pickup locations
7. Enable AllowHoldPolicyOverride
8. Try to place a hold on biblio B
You should now see all valid pickup locations in a dropdown list
(with an exclamation mark in front of each option) with none selected
by default
9. Verify you can place a title-level hold and an item-level hold
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Aleisha Amohia <aleishaamohia@hotmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
For single bibs we use an ajax select2 dropdown, and we don't use this
value
To test:
1 - Place some holds on single bibs
2 - Confirm dropdowns for pickup location work as expected
3 - Do the same for multiple bibs selected from search results
4 - Apply patch
5 - Confirm there is no change after the patch
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
When placing an item-level hold in the Staff interface,
the table at the bottom of the screen (under the "Place
a hold on a specific item" heading) should display the
icon associated with the item type of each item in the
'Item type' column.
This feature broke in v22.05.00 (for Debian package installs):
instead of the item type icon you get the default 'broken
image URL' image of your web browser.
This patch fixes that.
Test plan:
1) (if needed) Configure the following System preferences:
- item-level_itypes => 'specific item'
- noItemTypeImages => 'Show'
2) (if needed) In Koha Administration > Item types, create
an item type and associate it with an icon
3) (if needed) Create a test bibliographic record, and add
an item to it that has an item type with an icon
4) Visit the bibliographic record's details page in the
Staff interface. Select 'Holds' on the left hand side,
then pick a patron. The "Place a hold on ..." page should
load. In the 'Item type' column of the table at the bottom
of the screen notice that instead of seeing the icon
associated with the item type of each item you get the
default 'broken image URL' image of your web browser [*]
[*] In non-Debian package installs, the 'href' property
of the item type icon's <img> tag should start with
'/opac-tmpl/bootstrap/itemtypeimg'
5) Apply this patch, restart Plack and refresh the page.
The item type icon should now be displayed correctly.
KTD and Koha Sandboxes users: To verify the patch has
worked, you should right-click on the item type icon and
click 'Inspect': the 'href' property of the <img> tag
should now start with: '/intranet-tmpl/prog/img/itemtypeimg'
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch updates four scripts to use checkauth instead of get_template_and_user
reserve/modrequest.pl
reserve/modrequest_suspendall.pl
course_reserves/mod_course.pl
members/members-update-do.pl
No behvaiour change is expected
To test:
0 - Apply patch
1 - Place some holds for a patron
2 - From patron page, confirm you can suspend all
3 - confirm you can delete marked holds
4 - Edit a course in course-reserves
5 - Make a chaneg to personal details via OPAC
6 - Confirm change can be approved on staff side
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Rebecca Coert <rcoert@arlingtonva.us>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
If some holds are overridable, and AllowHoldPolicyOverride is enabled, Koha
used to "flag" each holdable item to let librarians know the hold could not
normally be placed. In 22.05 up to current master as of this writing, no
warning is displayed.
Test Plan:
1) Set one circ rule to allow 0 holds
2) For Library A, set "Hold pickup library match" to "item's hold group"
3) Enable AllowHoldPolicyOverride
4) Set ReservesControlBranch to "item's home branch"
5) Create a record with an item for Library A, one for Library B, and one for Library C
This should create a scenario where A's item cannot be held, and B and C's items must be overridden
6) Note you get the "Cannot place hold" but can place those holds anyway without a "warning" sign
7) Apply this patch
8) Restart all the things!
9) Reload the page, you should now see the warning icons!
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Since we are not in a loop or using this multiple times it's simple to
do it this way, helps with changing the template code in the future
too since if we want to remove this syspref variable we know it is
only used in this one particular place.
To test:
1) Grep for reserve_in_future and make sure there are no matches
after applying this patch
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Martin Renvoize
Jonathan Druart
Nick Clemens
Pedro Amorim
Tomás Cohen Arazi
Lucas Gass
emilyrose
Aleisha Amohia
CJ Lynce
Koha Development Team
Sam Lau
Paul Derscheid
Emily Lamancusa
Marcel de Rooy
David Cook
Julian Maurice
Thibaud Guillot
Lari Taskula
David Gustafsson
Andreas Roussos
Kyle Hall
Joonas Kylmälä