Prevents possible template bugs from allowing editing
of reports by others without the proper permissions.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Lawlor <blawlor@clamsnet.org>
Signed-off-by: Martin Renvoize <martin.renvoize@openfifth.co.uk>
Signed-off-by: Pedro Amorim <pedro.amorim@openfifth.co.uk>
This patch implements the library_limit concept for Report/Reports. Staff with the correct permission and superlibrarians can set libaries to which the report should be visible, if the system preference is enabled.
Test plan:
Confirm Initial Settings
1. Log in to Koha staff with username: koha and password: koha and set your library as Centerville if it's not already.
2. Visit the Saved reports page, and create and save three reports: Report 1, Report 2, and Report 3. The SQL query for each report doesn't matter, it should just be something valid.
3. Visit the Patrons page and create two staff users: StaffReportLimitUser and StaffNoLimitPermission. Set their home libraries to Centerville and Fairfield, respectively.
4. Under Allow access to the reports module, ensure both users have report management permissions for Create, Delete, Execute.
Verify Patch Settings
5. Apply the patch and restart services. If using Koha Testing Docker (KTD): from the Koha repo directory, apply the patch (e.g. `git bz apply 16631`, or check out the patched branch with `git fetch && git checkout <branch>`), then run `ktd --shell` to enter the KTD shell and run `restart_all`. If the patched branch is already checked out, just enter the KTD shell and run `restart_all`.
6. Click Patrons in the top navbar to go to the Patrons page.
7. Search for "StaffReportLimitUser" in the patron search field.
8. Click StaffReportLimitUser to edit the patron record for this user.
9. Click More -> Set permissions to access the permissions screens for the StaffReportLimitUser.
10. In the row for Allow access to the reports module (reports), click Show details to view relevant permissions.
11. Confirm Manage Report Limits (manage_report_limits) is an option under Allow access to the reports module (reports).
12. Click the checkbox for Manage Report Limits to give this user this permission, and click Save.
13. Go to the System Preferences page (Click the More dropdown from the top nav bar, click Administration, click System Preferences).
14. Verify Reports is an option in the left side navigation bar, and that when clicked, you see the LimitReportsByBranch option.
15. Enable LimitReportsByBranch as described in step 14.
16. Go back to Saved reports as in Step 2.
17. Click Edit in the row menu for Report 1.
18. At the bottom of the Report 1 edit page, you should see a Library limitation select box.
Verify the Library Limitation Settings are Persisted
19. Choose Centerville from the select box and click Update SQL.
20. Reload the page, or navigate away from the page and go back to the edit screen for Report 1.
21. Verify that Centerville is still in the Library limitation select box.
22. Add Fairfield in the Library limitation select box and click Update and run SQL.
23. Go back to editing Report 1.
24. Confirm the Library limitation select box has both Centerville and Fairfield selected.
25. Duplicate Report 1.
26. Confirm the Library limitation select box has both Centerville and Fairfield selected.
27. Click Save Report.
28. Confirm the Library limitation select box has both Centerville and Fairfield selected.
Verify Reports are Limited Based on Library Limitations
29. Edit Report 1 to add Centerville in the Library limitation select box as the only choice and click Update SQL.
30. Edit Report 2 to add Fairfield in the Library limitation select box as the only choice and click Update SQL.
31. Report 3 should have no library limitations, so it should be visible to all libraries.
32. Go to Saved reports as in Step 2.
33. Confirm you do not see Report 2, and only Report 1 and Report 3.
34. In the upper right corner, click the drop down that says koha Centerville and click Set library to change your library.
35. Set your library to Fairfield.
36. Go to Saved reports as in Step 2.
37. Confirm you do not see Report 1, and only Report 2 and Report 3.
Verify Disabling LimitReportsByBranch Preference Shows All Reports
38. Disable LimitReportsByBranch preference as in steps 13 to 15.
39. Go to Saved reports as in Step 2.
40. Confirm Report 1, Report 2, Report 3 are visible.
41. Click to edit Report 1 and verify there is no Library limitation select box.
Verify Library limitations are Persisted When EnableFilteringReports is Toggled On or Off
42. Enable LimitReportsByBranch preference as in steps 13 to 15.
43. Ensure your library is set to Fairfield as in step 35.
44. Go to Saved reports as in Step 2.
45. Confirm Report 1 is not visible, and Report 2 and Report 3 are visible.
46. Click to edit Report 2 and verify the Library limitation select box is at the bottom of the page and that it has Fairfield selected.
Verify the Show all reports option shows all reports for users with the Manage Report Limits permission and superlibrarians
47. Go to Saved reports as in Step 2 and in the Show reports dropdown, select Show all reports, and click Apply filter.
48. Confirm the page reloads with all reports visible: Report 1, Report 2, and Report 3 should be visible.
49. Select Show my branch reports from the dropdown and click Apply filter.
50. Confirm Report 1 is not visible, and Report 2 and Report 3 are visible (you should only see reports for your branch, Fairfield).
Verify Report filters return the correct results
51. Go to Saved reports as in Step 2.
52. Verify you're viewing only your branch's reports in the filter.
53. Under Filter in the left sidebar, type "2" in the Keyword field and click Apply filter.
54. Confirm only Report 2 is visible.
55. Under Filter in the left sidebar, type "1" in the Keyword field and click Apply filter.
56. Confirm there are no reports visible, and the message "No saved reports match your criteria" is displayed.
Verify Library Limits column is available to superlibrarians and users with the Manage Report Limits permission
57. Go to Saved reports as in Step 2.
58. Click the Columns dropdown and ensure that the Library limits column is available to select for display. Select it.
59. Confirm that the Library limits column is now visible in the list of reports and that it shows the correct library limitations for each report (e.g., Report 1 should show 1 library limitation and Centerville (CPL) on hover, Report 2 should show 1 library limitation and Fairfield (FFL) on hover, and Report 3 should show no limitation).
Verify the Show all reports and Limit reports options are available to users that are not superlibrarian but have the Manage Report Limits permission
60. For the StaffReportLimitUser, add the permission for Manage Report Limits as described in steps 9 to 12. This will allow this user to see the Show all reports and Limit reports options.
61. Log out of the koha admin account. In the upper right corner, click the drop down that says koha Fairfield and click Log out.
62. Log in as StaffReportLimitUser, the previously created staff user with report permissions.
63. Confirm the staff user's library is Centerville in the upper right corner of the screen.
64. Go to Saved reports as in Step 2.
65. Confirm the filter option for Show reports is visible.
66. Click to edit Report 1.
67. Verify there is a Library limitation select box and that it can be interacted with.
Verify the Show all reports and Limit reports options are not available to users that are not superlibrarian and do not have the Manage Report Limits permission
68. Log out of the StaffReportLimitUser account.
69. Log in as StaffNoLimitPermission, the previously created staff user without the Manage Report Limits permission.
70. Confirm the staff user's library is Fairfield in the upper right corner of the screen.
71. Go to Saved reports as in Step 2.
72. Click the Columns dropdown and ensure that the Library limits column is not in the list of available columns to select for display.
73. Confirm the filter option for Show reports is not available.
74. Click to edit Report 2.
75. Verify there is no Library limitation select box at the bottom of the page.
[NEW] Verify library limits are auto-assigned and preserved correctly for non-permissioned users
76. Still logged in as StaffNoLimitPermission (Fairfield) from the previous section. Go to Saved reports and click New report. Enter "Limit Auto-Assign Test" as the report name and SELECT 1 as the SQL. Confirm there is no Library limitations select box visible on the form. Click Save.
77. Go back to Saved reports. Click Edit for Report 2 (limited to Fairfield). Add `-- test` as a trailing SQL comment and click Update SQL. This simulates a non-permissioned user saving an existing report that already has limits.
78. Go back to Saved reports. Click Edit for Report 3 (no library limits). Add `-- test` as a trailing SQL comment and click Update SQL. This simulates a non-permissioned user saving an existing report that has no limits.
79. Log out and log back in as StaffReportLimitUser (Centerville, has manage_report_limits).
80. Go to Saved reports. Use Show all reports if needed. Find "Limit Auto-Assign Test" and click Edit. Confirm the Library limitations select box shows Fairfield as the only selected library — the report was automatically limited to the creator's home library on create.
81. Find Report 2 and click Edit. Confirm the Library limitations select box still shows only Fairfield — the existing limit was preserved when the non-permissioned user saved the report.
82. Find Report 3 and click Edit. Confirm the Library limitations select box is empty — no limits were introduced when the non-permissioned user saved a report that had no existing limits.
Verify limited reports are not visible to users without permissions
83. While still logged in as StaffReportLimitUser from step 79, copy the URL for the edit page of Report 1.
84. Log out of the StaffReportLimitUser account.
85. Log in as StaffNoLimitPermission, the user without the Manage Report Limits permission.
86. Paste the copied URL for the edit page of Report 1 into the browser and navigate to it.
87. Confirm that you see an error message that says "This report is restricted and cannot be accessed by the current user." and that the page does not load the report details.
Run Unit Tests
88. Using Koha Testing Docker, in the Koha home directory run the command: ktd --shell to start the ktd shell.
89. Run command: reset_all to drop and recreate the koha database.
90. Run command prove t/db_dependent/Koha/Reports.t to run the test.
91. This file contains the unit tests for the reports_branches table and the new subtest `library limits enforcement on save and update`, which covers auto-assignment of branch limits on create and preservation of limits on update for non-permissioned users.
92. All tests should pass.
93. Run command prove t/Koha/Auth/Permissions.t
94. Permissions unit tests in this file were updated.
95. All tests should pass.
96. Run command prove t/db_dependent/Reports/Guided.t
97. The Guided report tests were updated to account for the new library limitations and permissions.
98. All tests should pass.
Signoff
99. Sign off if the steps above check out.
Sponsored-by: Ramapo Catskill Library System
Co-authored-by: Casey Conlin <casey.conlin@gmail.com>
Signed-off-by: Emmi Takkinen <emmi.takkinen@koha-suomi.fi>
Signed-off-by: Andrew Fuerste Henry <andrew@bywatersolutions.com>
Signed-off-by: Pedro Amorim <pedro.amorim@openfifth.co.uk>
Building on bug 41918, it would be good to limit the number of reports
a given user can run at a time. This control is config-file based as
it is tied to the server resources provided by the administrator.
Adds a new koha-conf.xml option total_running_reports_per_user_limit
(0 = disabled). When the configured limit is reached, the user is told
"You have too many reports running at the moment. Please wait for some
of them to finish before running this report again."
Note on implementation: the original patch on bz (attachment 198034)
performed a second pre-flight Koha::Reports->running call in
reports/guided_reports.pl. The bug 41918 QA follow-ups already pushed
the duplicate-running guard into Koha::Report::prep_report so it would
fire across the staff UI, svc/report and opac/svc/report. This patch
extends that same model-layer architecture rather than reintroducing
controller-layer enforcement:
- New Koha::Exceptions::Report::TotalRunning subclass of
Koha::Exceptions::Report.
- prep_report now performs a second check after the duplicate one and
throws TotalRunning when the user has total_running_reports_per_user_limit
reports of any kind already in flight.
- All three callers (guided_reports.pl, svc/report, opac/svc/report)
catch the new exception alongside DuplicateRunning, mapping it to a
new template error key total_running_reports_limit_exceeded for the
staff UI and a JSON {error: total_running_reports_limit_exceeded}
with HTTP 429 for the JSON endpoints.
Test Plan:
1) Set total_running_reports_per_user_limit to 3 in your koha-conf.xml.
2) Create 3 long-running reports like:
SELECT COUNT(*) FROM items i1 JOIN items i2 JOIN items i3 JOIN items i4 JOIN items i5 JOIN items i6
3) Run each report in turn by opening a new tab, browsing to the
reports module, and choosing to run that report.
4) Note the first three continue to run, but a fourth attempt gives
the new "too many reports running" alert in the staff UI.
5) Repeat against /cgi-bin/koha/svc/report?id=N and confirm an HTTP
429 response with JSON {error: total_running_reports_limit_exceeded}.
6) Set total_running_reports_per_user_limit back to 0 and confirm
normal behaviour resumes.
7) prove t/db_dependent/Koha/Reports.t -> 13 tests pass, including a
new subtest for TotalRunning.
Signed-off-by: Alex Carver [Acerock7] <alex@rcls.org>
Signed-off-by: Martin Renvoize <martin.renvoize@openfifth.co.uk>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
The previous patches enforced duplicate_running_reports_per_user_limit
only in reports/guided_reports.pl. Two other code paths run saved SQL
reports for an authenticated user and bypassed the guard entirely:
- svc/report (staff JSON endpoint, eg. used for chart widgets and any
caller hitting /cgi-bin/koha/svc/report?id=N directly)
- opac/svc/report (OPAC JSON endpoint)
A user who hit their staff-UI limit could still spawn additional copies
of the same long-running report via either svc endpoint, defeating the
guard.
Push the check into Koha::Report::prep_report itself, which is the one
function all three callers go through. When the limit is reached
prep_report now throws a new Koha::Exceptions::Report::DuplicateRunning
(carrying report_id, user_id and the configured limit). The guided
reports CGI catches it and re-renders the existing "report is already
running" alert; both svc/report endpoints catch it and return HTTP 429
Too Many Requests with a JSON { error: "duplicate_running_report" }
payload.
Notes:
- The pre-flight Koha::Reports->running call is removed from the
guided-reports CGI; the model now owns that policy and the
controller is just rendering. The TOCTOU window remains identical
in size and is the same intentional trade-off as before.
- Limit=0 (the default) and absent userenv both bypass the check, so
CLI cronjobs (misc/cronjobs/runreport.pl) and direct DB users are
unaffected.
Test plan:
1) prove t/db_dependent/Koha/Reports.t - now includes a new subtest
covering limit=0 (lives), under limit (lives) and at limit (throws
Koha::Exceptions::Report::DuplicateRunning).
2) Set duplicate_running_reports_per_user_limit=1 in koha-conf.xml,
restart_all.
3) Open a long-running report in two staff tabs - second tab shows
the "report is already running" alert (unchanged behaviour).
4) While one run is in flight, hit /cgi-bin/koha/svc/report?id=N as
the same user - now returns HTTP 429 with the JSON error payload
(previously: ran a second copy of the query).
5) Same check on /cgi-bin/koha/opac/svc/report?id=N.
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Two small documentation improvements following on from the duplicate-
running guard:
- Koha::Report::prep_report now spells out the tracking-comment format
in its POD. Koha::Reports->running parses this comment, and external
log/audit tooling that consumes Koha SQL relied on the previous
format (/* saved_sql.id: <id> */). Calling out the new format
explicitly makes the public contract visible to anyone reading the
POD or grepping for it, and warns future contributors that changing
the wrapper will break running() too.
- reports/guided_reports.pl gets an inline comment explaining the
TOCTOU window between the count check and the actual report
execution. The window is intentional - the guard exists to stop
accidental double-clicks and two-tab submissions, not to be a
serializing lock - so worst case is one extra concurrent run, which
is acceptable and cheaper than the alternative.
No behaviour change.
Test plan:
1) prove t/db_dependent/Koha/Reports.t still passes.
2) perldoc Koha::Report -> prep_report section now mentions the
saved_sql.id / user_id wrapper format.
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Alex Carver [Acerock7] <alex@rcls.org>
Signed-off-by: Martin Renvoize <martin.renvoize@openfifth.co.uk>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Reports may consume too much resources of the db. To avoid that a new config param
'report_sql_max_statement_time_seconds' was created, which sets the maximum time a report statement may
take to execute in seconds. If it takes longer it will be aborted.
reflowed the code, so that is is executed after is_sql_valid, and put
the code in a subroutine
Test plan:
0. if you run this test in ktd you should check if you are running
mysql or mariadb, and then be able to switch database
1. create a new report by going to
More > Reports > New SQL Report
(/cgi-bin/koha/reports/guided_reports.pl?op=add_form_sql)
enter the following SQL (which only purpose is to run long)
select ExtractValue(bm1.metadata,'//controlfield[@tag="001"]')
from biblio_metadata bm1
join biblio_metadata bm2 on
ExtractValue(bm1.metadata,'//controlfield[@tag="001"]') =
ExtractValue(bm2.metadata,'//datafield[@tag="773"]/subfield[@code="w"]')
give the Report a name eg "extract_long"
2. run the report
3. report should be executed and return several 1000 lines on ktd
4. apply patch
5. add a the parameter to koha-conf.xml to the <config> </config> part
<report_sql_max_statement_time_seconds>0.001</report_sql_max_statement_time_seconds>
OR use the following statemtn
sed -i '/<biblioserver>/a <report_sql_max_statement_time_seconds>0.001<\/report_sql_max_statement_time_seconds>' /etc/koha/sites/kohadev/koha-conf.xml
6. restart koha
koha-plack --restart kohadev
7. go back to the report page and rerun report which now should lead to an error
The following error was encountered:
The database returned the following error:
Query execution was interrupted, maximum statement execution time exceeded
Please check the log for further details.
8. in koha-conf.xml set
<report_sql_max_statement_time_seconds>20</report_sql_max_statement_time_seconds>
9. restart koha
10. rerun query, which now should execute as before
11. stop ktd, and restart with the "other" database
DB_IMAGE=mysql:8.0 ktd up
DB_IMAGE=mariadb:10.5 ktd up
12. repeat from step 1 (omit applying the patch)
13. Sign off
14. Thx
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
To test:
1 - Attempt to save a report containing "select force_password_reset_when_set_by_staff from categories"
2 - observe koha prevents this save
3 - apply patch, restart services
4 - repeat step 1
5 - observe your report now saves and runs successfully
While adding this new field to the list of allowed fields, I changed "whitelist" to "allowlist" as suggested by the terminology guide: https://wiki.koha-community.org/wiki/Terminology
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Brendan Lawlor <blawlor@clamsnet.org>
Signed-off-by: Martin Renvoize <martin.renvoize@openfifth.co.uk>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This commit is generated using:
% perl misc/devel/tidy.pl
*within* ktd, to get the same version of perltidy than what will be used
by our CI (currently v20230309).
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch fixes repeated param names for JSON report.
To test:
1) Create a report
SELECT count(*) from items where homebranch = <<Branchcode>>
UNION ALL
SELECT count(*) from deleteditems where homebranch = <<Branchcode>>
2) Run the report as JSON, cgi-bin/koha/svc/report?id=<id>&sql_params=<Branchcode>
3) Check that the second value is 0
4) Apply the patch
5) Run the report as JSON again
6) Check that the second value has the correct value
7) prove t/db_dependent/Koha/Reports.t
Sponsored-by: Koha-Suomi Oy
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Test plan:
Set pref ReportsExportLimit to some positive integer.
Test if exporting a report respects that limit.
Run t/db_dependent/Koha/Reports.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Do not allow password but allow password_expiry_days etc.
Do not allow token, secret and uuid too.
Test plan:
Run t/db_dependent/Koha/Reports.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Rebased for changes to guided_reports_start.tt
This patch adds the ability to use multi select in report dropdowns.
It uses syntax similar to using a list and when using the :all option
WHERE i.homebranch in <<Select libraries|brnaches:in>>
Test plan:
1. Create an SQL report with with new syntax for multi select
SELECT
i.homebranch,
count(*)
FROM items i
WHERE i.homebranch in <<Select libraries|branches:in>>
GROUP BY i.homebranch
2. Save the report
3. Note that you get the error
The authorized value category (branches:in) you selected does not exist.
4. Apply the patch and repeat steps 1 and 2
5. Note the report saves successfully
6. Run the report
7. Note the select dropdown is now a multiselect
8. Run the report with multiple selections
10. Click show SQL and note that multi select parameters get inserted into the query like:
WHERE i.homebranch in ('CPL', 'FFL', 'FPL')
11. Test other types of queries with multiple multi selects and lists etc
Sponsored-by: CLAMS
Signed-off-by: Andrew Fuerste-Henry <andrewfh@dubcolib.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
To support additional spaces.
Using the system for defining a column name placeholder (Bug 23390), if
there is a space inside the column name placeholder it won't work. The
SQL example in Bug 5697:
SELECT
i.itemnumber,
i.itemnumber as Exemplarnummber,
[[i.itemnumber| itemnumber for batch]],
CONCAT('<a
href=\"/cgi-bin/koha/cataloguing/additem.pl?op=edititem&biblionumber=',
i.biblionumber, '&itemnumber=', i.itemnumber, '#edititem', '\">',
i.itemnumber, '</a>' ) AS "itemnumber as edit link"
FROM items i
"[[i.itemnumber| itemnumber for batch]]" has a space before "itemnumber
for batch." With that space removed it works as expected.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The idea rely on the KohaDates TT plugin for the date formatting. We
should not have any output_pref calls in pl or pm (there are some
exceptions, for ILSDI for instance).
Also flatpickr will deal with the places where dates are inputed. We
will pass the raw SQL value (what we call 'iso' in Koha::DateUtils), and
the controller will receive the same value, no need to additional
conversion.
Note that DBIC has the capability to auto-deflate DateTime objects,
which makes things way easier. We can either pass the value we receive
from the controller, or pass a DT object to our methods.
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
When trying to figure out which saved SQL report caused too much load, it's useful to have the report id show in the mysql process list.
This patch adds the saved SQL ID number as a comment line in front
of the SQL before passing it to the database.
Test Plan:
1) Apply this patch
2) Restart all the things!
3) Create a long running query like:
SELECT * FROM borrowers a, borrowers b, borrowers c, borrowers d
4) Connect to the database using koha-mysql
5) Execute "show processlist;"
6) Note the Info column looks something like:
SELECT * FROM borrowers a, borrowers b, borrowers c, borrowers d /* saved_sql.id: 1 */
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
On bug 17591 we discovered that there was something weird going on with
the way we export and use subroutines/modules.
This patch tries to standardize our EXPORT to use EXPORT_OK only.
That way we will need to explicitely define the subroutine we want to
use from a module.
This patch is a squashed version of:
Bug 17600: After export.pl
Bug 17600: After perlimport
Bug 17600: Manual changes
Bug 17600: Other manual changes after second perlimports run
Bug 17600: Fix tests
And a lot of other manual changes.
export.pl is a dirty script that can be found on bug 17600.
"perlimport" is:
git clone https://github.com/oalders/App-perlimports.git
cd App-perlimports/
cpanm --installdeps .
export PERL5LIB="$PERL5LIB:/kohadevbox/koha/App-perlimports/lib"
find . \( -name "*.pl" -o -name "*.pm" \) -exec perl App-perlimports/script/perlimports --inplace-edit --no-preserve-unused --filename {} \;
The ideas of this patch are to:
* use EXPORT_OK instead of EXPORT
* perltidy the EXPORT_OK list
* remove '&' before the subroutine names
* remove some uneeded use statements
* explicitely import the subroutines we need within the controllers or
modules
Note that the private subroutines (starting with _) should not be
exported (and not used from outside of the module except from tests).
EXPORT vs EXPORT_OK (from
https://www.thegeekstuff.com/2010/06/perl-exporter-examples/)
"""
Export allows to export the functions and variables of modules to user’s namespace using the standard import method. This way, we don’t need to create the objects for the modules to access it’s members.
@EXPORT and @EXPORT_OK are the two main variables used during export operation.
@EXPORT contains list of symbols (subroutines and variables) of the module to be exported into the caller namespace.
@EXPORT_OK does export of symbols on demand basis.
"""
If this patch caused a conflict with a patch you wrote prior to its
push:
* Make sure you are not reintroducing a "use" statement that has been
removed
* "$subroutine" is not exported by the C4::$MODULE module
means that you need to add the subroutine to the @EXPORT_OK list
* Bareword "$subroutine" not allowed while "strict subs"
means that you didn't imported the subroutine from the module:
- use $MODULE qw( $subroutine list );
You can also use the fully qualified namespace: C4::$MODULE::$subroutine
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Bug 9978 should have fixed them all, but some were missing.
We want all the license statements part of Koha to be identical, and
using the GPLv3 statement.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Includes:
* code factorization
Some code from subscription & Mana-KB has been factorized in order to speed-up next developments
* SytemPreferences:
Mana Activation:
- add a value "no, let me think about it", that is the default value.
- as long as this value is selected, messages ask if user want to activate it ( in Administration and Add-subscription(page 2) )
AutoShareWithMana
- Add the syspref AutoShareWithMana: user can automatically share infos with Mana-KB (not set by default)
* Interface :
- On mana-search, rows are now sorted by date of last import, then by number of users
- Windows redesigned to improve the user experience
* New Feature : report a mistake.
- people can now report an invalid data (wrong, obsolete,...)
- if a data is reported as invalid many time, it will appear differently
- Added few tooltip (to explain the fields last import, nb of users, to explain the new feature)
- When reporting a data as invalid, a comment can also be added. Koha will then display comments related to data in result lists
* API (svc/mana)
- add svc/mana/addvaluetofield: allows to ask mana incrementing a field of a resource
- no hardcoding for resources in the code of api (api needs to be called with a ressourcename)
* New feature : SQL report sharing
- Create Koha::Report.pm and Koha::Reports.pm, objects class for Reports
- New feature: share reports with Mana-KB
- New feature: search report in Mana-KB with keywords
- New feature: load reports from Mana-KB
Test plan:
1 - Apply Patch + update database
2 - Copy the three lines about mana config in etc/koha-conf.xml in ../etc/koha-conf.xml (after <backupdir> for example)
<!-- URL of the mana KB server -->
<!-- alternative value http://mana-test.koha-community.org to query the test server -->
<mana_config>https://mana-kb.koha-community.org</mana_config>
3 - Check Mana syspref and AutoShareWithMana syspref are not activated
4 - Search the syspref ManaToken and follow the instructions
5 - subscriptions
- Try create a new subscription for a first serial => Mana-KB shouldn't show you anything (except if the base hase been filled)
- Share this serial with Mana-KB (on the serial individual's page there must be a Share button)
- Try to create a new subscription for serial nr1 => a message should appear when you click on "next", click on "use", the fields should automaticaly appear
- Activate AutoShareWithMana => Subscriptions
- Create a new subscription for a second serial
- There shouldn't be any Share button
- Create a second subscription => the message should appear, click again on use
6 - SQL Report
- Create a new SQL report, without notes.
- On the table with all report (reports > use saved), there should be the action "Share"
- If you click on share, you have an error message
- Create a new report, with a title and notes longer than 20 characters
- You can share it with mana => you will have a success message
- On (report > use saved), there must be a message inviting you to search on Mana-KB for more results, enter a few word from title, notes, type of the report you shared, it should appear. You can use it, it will load it into your report list.
7 - Report mistakes.
- On any table containing Mana-KB search results, you can report a mistake and add a comment.
8 - For each previous test, try to send wrong data, to delete the security token, to send nothing: it should show a correct warning message.
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Rebased-by: Alex Arnaud <alex.arnaud@biblibre.com> (2018-07-04)
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
To test:
prove -v t/db_dependent/Koha/Reports.t
Signed-off-by: Claire Gravely <claire.gravely@bsz-bw.de>
Signed-off-by: Maksim Sen <maksim.sen@inlibro.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Kyle M Hall
Lucas Gass
Cameron E. Tidd
Martin Renvoize
Mark Hofstetter
Andrew Fuerste Henry
Tomas Cohen Arazi
Koha Development Team
Johanna Räisä
Marcel de Rooy
Brendan Lawlor
Jonathan Druart
Nick Clemens
Baptiste Wojtkowski