Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Pedro Amorim <pedro.amorim@openfifth.co.uk>
Add linked_accounts and link_group data for display.
Signed-off-by: Trevor Diamond <trevor.diamond@mainlib.org>
Signed-off-by: Kellie Stephens <kellie.stephens@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Pedro Amorim <pedro.amorim@openfifth.co.uk>
Adds a read-only "Consents" section to the staff patron detail page
showing the patron's consent status for GDPR (when PrivacyPolicyConsent
is enabled) and any plugin-defined consent types.
Each consent displays with visual status indicators:
- Green checkmark with timestamp when consent was given
- Red X with timestamp when consent was refused
- Gray "Not specified" when no consent recorded
Test plan:
1. Enable PrivacyPolicyConsent system preference
2. As patron in OPAC: give/refuse consent at "Your consents"
3. As staff: view patron detail page
4. Verify "Consents" section shows correct status and timestamp
5. Test with no consent recorded (should show "Not specified")
6. If available, test with plugin-defined consent types
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
1. Create several random patron circ messages with different dates. I used the following sql for my ktd:
-- INSERT INTO messages (borrowernumber, branchcode, message_type, message, message_date)
SELECT
51 AS borrowernumber,
'CPL' AS branchcode,
ELT(FLOOR(1 + (RAND() * 3)), 'L','B','E') AS message_type, -- L=Staff note, B=OPAC, E=Email (adjust to your codes)
CONCAT('Random test message ', FLOOR(RAND()*1000)) AS message,
DATE_ADD(CURDATE(), INTERVAL -FLOOR(RAND() * 1825) DAY) AS message_date -- random day in last ~5 years (5*365)
FROM (
SELECT 1 UNION ALL SELECT 2 UNION ALL SELECT 3 UNION ALL SELECT 4 UNION ALL SELECT 5
UNION ALL SELECT 6 UNION ALL SELECT 7 UNION ALL SELECT 8 UNION ALL SELECT 9 UNION ALL SELECT 10
) AS x;
2. View the patron account and notice that messages are sorted by type, but not by date.
3. Apply the patch and restart_all
4. Refresh the patron account page and clear the browser cache if necessary.
5. View the patron account again and notice that the messages are still sorted by type, but they are also sorted in descending order (newest to oldest).
6. Sign off and have a great day!
Signed-off-by: Jen Tormey <jntormey@dmpl.org>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Brendan Lawlor <blawlor@clamsnet.org>
Signed-off-by: Martin Renvoize <martin.renvoize@openfifth.co.uk>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
It can be useful, for instance, if a library has the same title from
different publishers (so 1 title but several biblio records) but the
user only wants a copy of the book, regardless of the publisher.
Test plan:
0. Run updatedatabase.pl and misc/devel/update_dbix_class_files.pl
1. Go to intranet search, display some results, click on some checkboxes
and click on 'Place hold' button at the top of the results.
2. Search for a patron
3. Check the 'Treat as hold group' checkbox
4. Click on 'Place hold'
5. In the next screen you should see all the holds you placed with the
additional text '(part of a hold group)' in Details column.
6. Click on the "hold group" link. A modal window should appear with
the content of the hold group (a list of holds)
7. Check in an item of one of the reserved biblios and confirm the hold
8. The hold status is changed to Waiting, and all other holds are deleted.
The other holds will also be removed from the holds queue.
9. Confirm tests pass
- t/db_dependent/Koha/Holds.t
- t/db_dependent/Reserves/HoldGroup.t
Note: the "hold group" link is displayed in the following pages:
- reserve/request.pl
- circ/circulation.pl
- members/moremember.pl
- circ/pendingreserves.pl
- circ/view_holdsqueue.pl
Note: A hold group is counted as only one hold
Sponsored-by: Catalyst IT
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Pedro Amorim <pedro.amorim@openfifth.co.uk>
Signed-off-by: Andrew Fuerste Henry <andrew@bywatersolutions.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
When displaying messages on a patron account, group the messages by
type and label which are OPAC messages and which are internal staff
messages.
To test:
1. Find a patron and add several messages to their account, alternating
between internal staff messages and OPAC messages
--> Note that the messages display in the order that they are added and
not explicitly labeled
2. Apply patch and refresh page
--> Confirm that all staff messages display first and all OPAC messages
display underneath
--> Confirm that messages are now labeled "Staff note" or "OPAC"
3. Play around on the patron account and confirm that the message
display is consistent after taking different actions:
- On the Details page
- On the Check out page
- After adding a new staff message
- After adding a new OPAC message
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Laura_Escamilla <laura.escamilla@bywatersolutions.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
To test:
1 - Create a patron in a category that can be a guarantee and do not assign any guarantor
2 - Create a patron in a 'Child' account type and do not assign a guarantor
3 - Enable system preference 'ChildNeedsGuarantor'
4 - View 'Check out' and 'Details' tabs for both patrons, note there is no warning
5 - Apply patch
6 - Repeat 4, note warning on all pages
7 - Add a patron gaurantor on the child - repeat 4 - warning is gone
8 - Add non-patron guarantor information to other patron - repeat 4 - warning is gone
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Baptiste Wojtkowski <baptiste.wojtkowski@biblibre.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
The first motivation of this patch is to remove the following warnings
from t/db_dependent/Auth.t:
Use of uninitialized value $anonymous_patron in string eq at /kohadevbox/koha/C4/Auth.pm line 1497
Actually a correct fix seems to add a new `is_anonymous` method to
Koha::Patron in order to remove the warnings from everywhere else.
Test plan:
Confirm that you cannot log in using the anonymous patron and that the 2
tests are passing
prove t/db_dependent/Auth.t t/db_dependent/Koha/Patron.t
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@openfifth.co.uk>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Update the patch to use Koha::Account and it's associated 'outstanding'
methods to ensure we accurately portray outstanding amounts rather than
'all credits' totals.
I also remove the unused `$balance` variable from the
members/moremember.pl controller.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@openfifth.co.uk>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
To test:
1: Have patrons with a variety of credit/debit combinations
2: Confirm Koha shows the total debit amount in patron_messages if any debits exist
3: Confirm Koha does not show anything about creditd in patron_messages if any debits exist
4: Apply patch, restart_all
5: Confirm all patrons show both debit total and credit total
Signed-off-by: Martin Renvoize <martin.renvoize@openfifth.co.uk>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@openfifth.co.uk>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This commit is generated using:
% perl misc/devel/tidy.pl
*within* ktd, to get the same version of perltidy than what will be used
by our CI (currently v20230309).
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Sponsored-by: Cuyahoga County Public Library <https://cuyahogalibrary.org/>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch updates all instances where the current noissuescharge sysprefs are used. They will now use the is_patron_inside_charge_limits method to handle the patron category level limits
Sponsored-by: Cuyahoga County Public Library <https://cuyahogalibrary.org/>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Bug 31422 added a warning message when library limitations issue in patron edition page.
We should add this patron's messages in circ and details pages.
Like age limitations.
Test plan:
1) User's login branch and home library is: Centerville
2) Patron category "B - Board" is limited to Franklin
3) Edit a patron with Board category from Centerville
4) A message appears "The patron's current category (Board) is limited to other libraries."
Signed-off-by: Laura Escamilla <laura.escamilla@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
We do not longer need to generate_csrf from pl files
TODO - members/boraccount.tt and sco/sco-main.tt needs to be adjusted
Bug 34478: [TO SQUASH] Remove generate_csrf from pl
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
When a patron search is performed only a user with edit_borrowers
permission can search by name. Search can works only with cardnumber but
it makes searching less intuitive I think.
So, as mentioned in the discussion, I've added a new 'list_borrowers' permission,
completely independent of 'edit_borrowers', so that I can search for a member via the interface
and get the results. In addition to the permission to perform check in and checkouts, this no longer poses an obstacle to simple use.
Test plan:
1) Check with a user without 'edit_borrowers' permission that the patron search can only be performed with cardnumber
2) Apply this patch
3) Make the updatedatabase to add new 'list_borrowers' permissions
4) Set 'list_borrowers' permission on one user and see the difference
Signed-off-by: Andrew Fuerste-Henry <andrewfh@dubcolib.org>
Signed-off-by: Emmi Takkinen <emmi.takkinen@koha-suomi.fi>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Test Plan:
1. Apply patch
2. create a patron list if there aren't any
3. search for a patron
4. observe the "Patron lists" tab showing the list that the patron is not in
5. try adding the patron to the list and removing them from the list to
be sure the feature has full operation
6. click "Check Out" on the side bar menu to navigate to the circulation
page for this patron
7. observe the "Patron lists" tab, and verify it operates as it did on the
patron details page
Bug 32730: (follow-up) Minor corrections
by Owen Leonard
This patch corrects an instance of an incorrect capital letter
("Patron Lists" -> "Patron lists") and makes minor tweaks to
indentation.
Signed-off-by: Stina Hallin <stina.hallin@ub.lu.se>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Edit: (tcohen) new files should be run through perltidy ALWAYS. Did it
and squashed it here.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The anonymous patron details page should show an alert message.
1) Configure an existing borrowernumber in system preference 'AnonymousPatron'
2) Go to details page of this borrower :
/cgi-bin/koha/members/moremember.pl?borrowernumber=x
3) Check you see alert 'This is the anonymous patron.'
Signed-off-by: Kelly McElligott <kelly@bywatersolutions.com>
Signed-off-by: Johanna Miettunen <johanna.miettunen@haaga-helia.fi>
Signed-off-by: Päivi Knuutinen <paivi.knuutinen@joensuu.fi>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1. Turn on NoIssuesChargeGuarantorsWithGuarantees and set the amount to 5.
2. Create a guarantor/guarantee relationship.
3. Add a manual invoice to the guarantor that is larger than 5.00.
4. Notice the message on that circulation ( check out tab ) page. " Charges: Patron's guarantors and their other guarantees collectively owe X. Checkouts are BLOCKED because fine balance is OVER THE LIMIT. "
5. Look at the moremember ( details ) page. The same message does not appear.
6. Apply patch, restart_all
7. Try step 5 again, the message should now appear.
Signed-off-by: Barbara Johnson <barbara.johnson@bedfordtx.gov>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
A new tab is added to the details page of a patron to show, in a table, the fines of the patron's guarantees. A warning appears in the "Guarantees" section of the patron to make it obvious that fines exists.
+ resolve a git merge conflict
To test:
1) Apply patch
2) Choose a patron that has guarantees and navigate to the patron's details page
3) If the guarantees don't have any fines, the display should be unchanged
4) Add fines to the guarantee
5) Go back to the guarantor's details page
=> A warning should appear in the "Guarantees" section with the total due
6) Clicking on the link accompanying the warning focuses on the new
"Guarantees' fines" tab containing a table of all guarantee's and their
fines.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Hammat Wele <hammat.wele@inlibro.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This is a rebased submission following bug 31095 which removed the use of GetDebarments. This patch now uses $patron->restrictions to find the date and pass it to the template
Test plan:
1) Create a restriction on a patron and navigate to that patron in Checkouts or the patron details page
2) There should be a message with details about the restriction but the creation date of the restriction won't be included in the message
3) Apply patch
4) The message should now say "Restricted since DATE" as in the screenshot attached.
5) Change the 'dateformat' syspref and refresh, the date should change to reflect the syspref
Signed-off-by: Sally <sally.healey@cheshiresharedservices.gov.uk>
Signed-off-by: Laura Escamilla <laura.escamilla@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch removes the use of GetDebarments from members/moremember.pl
and replaces template references with patrons.restrictions and the new
includes introduced in the prior patch
Test plan
1. Confirm that the 'Restrictions (x)' tab still appears on the patron
details page.
2. Confirm that the 'Restrictions (x)' tab count is correct
3. Confirm that the 'Restrictions (x)' tab table functions
4. Confirm that the 'Restrictions (x)' tab 'Add manual restriction' form
works as expected
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch moves the new classes under ::Patron::Restriction:: and
enhances the Unit tests for those classes.
NOTE: We should drop keyed_on_code as part of bug 31095
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch displays a restriction type select box (when appropriate)
when adding manual patron restrictions
Sponsored-by: Loughborough University
Signed-off-by: Benjamin Veasey <B.T.Veasey@lboro.ac.uk>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The structure of debarments has changes slightly in that the displayed
text is now a product of a call to Koha::RestrictionTypes rather than
just the debarment's code. This patch allows for that
Sponsored-by: Loughborough University
Signed-off-by: Benjamin Veasey <B.T.Veasey@lboro.ac.uk>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This enhancement shows recalls ready for pick-up on the patron's account
so they can't be missed.
To test:
1) Enable the UseRecalls system preference and set up your
recalls-related circulation rules.
2) Check out an item to Patron B.
3) Log into the OPAC as Patron A and search for the item.
4) Place a recall on that item. Note the pickup library.
5) Go back to the staff client. At the top right of the page, confirm
your logged in library matches the recall pickup library. Set the
library to the recall pickup library if needed.
6) Check in the recalled item and confirm the recall as waiting for
Patron A.
7) Go to Patron A's account (members/moremember.pl). Confirm the recall
shows under 'Recalls waiting here' and all the information is correct.
8) Go to Patron A's checkouts (circ/circulation.pl). Confirm the recall
shows under 'Recalls waiting here' and all the information is correct.
9) Click on the menu at the top right of the page and choose 'Set
library'. Change the library to some other library.
10) Repeat steps 7 and 8, however this time the recall should show under
'Recalls waiting at other libraries'.
Sponsored-by: Catalyst IT
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
When system preference is off, call no code related to Koha::Recalls.
Also add some missing module import.
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch makes the different ->recalls accessors implemented on this
bug be more standard. This means:
- They don't do special things like default sorting or stripping out
special parameters. That's all left to the caller and the methods are
clean: they just return the related objects
- Useful filtering methods for Koha::Recalls resultsets are added. The
only used one (in the end) was ->filter_by_current. It seems like a
better approach, because it gives devs more control on how they want
to chain things, and there's a single place in which to maintain the
criteria of what is 'current' or 'finished'. This clearly makes the
'old' column obsolete IMHO, at least in the use cases I found. This is
covered by tests as well.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
See recalls on Intranet
- old recalls (all inactive recalls)
- recalls queue (all active recalls) - cancel, expire, revert waiting status, multiple cancel, mark overdue
- recalls to pull (available but not yet waiting) - cancel
- recalls awaiting pickup (awaiting pickup, awaiting pickup more than RecallMaxPickUpDelay days) - expire, revert waiting status
- overdue recalls (overdue to be returned) - cancel, multiple cancel
- biblio recalls tab (all active recalls relevant to this bib) - cancel, expire, revert waiting status, mark overdue
- patron recalls tab (all active recalls relevant to this patron) - cancel, expire, revert waiting status, mark overdue
- patron recalls history tab (all recalls relevant to this patron) - cancel, expire, revert waiting status, mark overdue
- log viewer
and the general circulation of recalls
== TEST PLAN FOR RECALLS ==
ADMINISTRATION
1. Apply all patches
2. Run database updates, update schema files and confirm everything applies cleanly
3. Run tests and confirm everything passes:
t/db_dependent/Koha/Recall.t
t/db_dependent/Koha/Recalls.t
t/db_dependent/Stats.t
t/db_dependent/Circulation/CalcFine.t
t/db_dependent/Koha/Item.t
t/db_dependent/Koha/Biblio.t
t/db_dependent/Koha/Patron.t
t/db_dependent/XSLT.t
t/db_dependent/Search.t
t/db_dependent/Holds.t
t/db_dependent/Circulation/transferbook.t
t/db_dependent/Circulation.t
4. Go to Administration -> system preferences. Find the UseRecalls system preference. It should be DISABLED. Confirm RecallsMaxPickUpDelay is set to 7 by default.
5. Go to Administration -> circulation rules. Confirm there are no recalls circulation rules showing.
6. Test a few circulation flows: checking out, placing a reserve, checking in, fulfilling a reserve, etc. Confirm everything works as normal.
7. Go to Administration -> system preferences. Enable the UseRecalls system preference.
8. Go to Administration -> circulation rules. Set the following rules:
Recalls allowed (count) = 0
Recalls per record (count) = 0
On shelf recalls allowed ( If any unavailable / If all unavailable ) = If any unavailable
Recall due date interval (days) = 3
Recall overdue fine amount = (something different to your normal fine amount)
Recall pickup period (days) = 1
Throughout your testing, try with different combinations of these rules and itemtype / branchcode / categorycode. Also try with null values. Keep the circulation rules open in another tab so you can refer to and update these easily. You should also have at least one other tab open for the staff client, and a third tab open for the OPAC, for ease of testing.
9. Go to your account -> More -> Set permissions. Confirm the recalls permission is checked.
10. Set up a test user with OPAC login details (Borrower A). This could also be your own user, as long as you have OPAC login access.
11. Set up a test record (Biblio A) with at least two items (Item A and Item B) of the same item type (or an item type with the same recall circ rules).
PLACING A RECALL
12. Log in to the OPAC as Borrower A. Do a catalogue search with a term that will return multiple results, including Biblio A.
13. Click on Biblio A.
14. Notice there is a 'Place recall' button on the sidebar menu. Click this button. There will be a message saying that there are no items to recall - this is because all items are available.
15. Check out Item A to another borrower (Borrower B).
16. Refresh the 'Place recall' page. You will still NOT be able to place a recall - this is because Recalls allowed = 0 and Recalls per record = 0.
17. Edit the circulation rules to have the following values:
Recalls allowed (count) = 1
Recalls per record (count) = 1
18. Refresh the 'Place recall' page. You will now see the form to place a recall.
BIBLIO-LEVEL RECALL, NO TRANSFER
19. Place a biblio-level recall.
Pickup location: Branch A, the set branch when you are logged into the staff client
Recall not needed after (expiration date): whatever you want
Select 'recall next available item'
Click confirm
20. Confirm the recall is placed successfully. Confirm that the new due date displayed is correctly calculated to be today's date, plus 3 days (taken from the 'recall due date interval' circ rule)
21. In the staff client, look at Borrower B's account, and go to their Notices tab. Confirm they have received a 'Notification to return recalled item' notice.
22. Look at Borrower B's checkouts table. Notice the due date for their checkout has been adjusted, and there is now a note to say that the item was recalled and the due date adjusted.
23. Log in to the OPAC as Borrower B and go to your summary tab. Notice there is a note under their checkout to say the item had been recalled.
24. Log out of the OPAC and log back in as Borrower A.
25. Go to your summary tab. Confirm there is a Recalls tab with a count of 1.
26. Cancel the recall using the button. Confirm it cancels and the Recalls tab disappears.
27. Do a catalogue search with a term that will return multiple results, including Biblio A.
28. When the results load, notice there is a 'Place recall' button next to the 'Place hold' button. Click this 'Place recall' button.
29. Notice you are redirected straight to the form to place a recall.
30. Place a biblio-level recall again, following the steps in Step 19.
31. Go to your recalls history tab. Notice your first cancelled recall shows here.
32. Cancel the recall you just created, using the button. Confirm it cancels and you are redirected to your summary tab.
33. In the staff client, enable the UseCourseReserves system preference.
34. Go to the main menu, click Course Reserves.
35. Add a new course. (You may also have to define an authorised value for DEPARTMENT.)
36. Add Item A as a reserve to this course.
37. View Course Reserves in the OPAC. Click the course you just created.
38. Notice the reserve has a Recall button underneath it's 'Checked out' status. Click this button.
39. Place a biblio-level recall again, following the steps in Step 19.
40. Click the 'Place recall' link in the breadcrumbs.
41. Notice there is a message saying that you have reached the max number of recalls on this record. This is because Recalls allowed = 1 and Recalls per record = 1.
42. Edit the circulation rules to have the following values:
Recalls allowed (count) = 10
Recalls per record (count) = 5
43. Refresh the 'Place recall' page. You will now see the form to place a recall.
44. Create another test record (Biblio B) with at least one item (Item C).
45. Find this record on the OPAC and place a biblio-level recall again, following the steps in Step 19.
46. In the staff client, go to Circulation -> Old recalls. You should be able to see your two cancelled recalls.
47. Go to Circulation -> Recalls queue. Your current recalls should show here.
48. Use the 'Select all' checkbox to select all recalls.
49. Cancel the recalls using the 'Cancel selected recalls' button.
50. Go to the OPAC and place a biblio-level recall on Biblio A again, following the steps in Step 19.
51. In the staff client, check in Item A, which should still be checked out to Borrower B.
52. A box should pop-up asking you to confirm Borrower A's recall. Click ignore.
53. Click the link to go view Biblio A's details in the catalogue.
54. Click the recalls tab. Notice Borrower A's recall is displayed, and shows it is still Requested (has not been confirmed waiting).
55. Check in Item A again. This time, confirm the recall as waiting using the "Confirm recall" button.
56. Go to Borrower A's Notices tab. Confirm there is a notice "Recalled item awaiting pickup".
57. Go to Borrower A's checkouts. Notice there is a recalls tab. Confirm the recall is showing as "Ready for pickup".
58. Click the 'Actions' dropdown. Click the "Revert waiting" button. The page should show a message that the waiting status has been reverted, without reloading.
59. This time, check in Item B. The recall confirmation box should show again, because this a biblio-level recall that any recallable item under Biblio A can fill. Click the "Print slip and confirm" button.
60. Check the slip that is generated. Confirm it contains Borrower A's correct details, and the details of the recall are correct.
61. Go to Circulation -> Recalls awaiting pickup. Confirm the recall is now waiting and shows in this list.
(You could also try this with Item B having a different item type to Item A, and circ rules not allowing Item B's item type to have recalls. When checking in Item A, it should not trigger the recall box).
62. Go to Borrower A's checkouts. Check out Item B.
63. Confirm the checkout is successful and the recall is removed from the Recalls tab.
64. Go to Circulation -> Old recalls. The fulfilled recall should show.
65. Check in Item B.
BIBLIO-LEVEL RECALL, TRANSFER REQUIRED
66. Check out Item A to Borrower B.
67. Log in to the OPAC as Borrower A.
68. Find Biblio A and place a biblio-level recall.
Pickup location: Branch B, a different branch from your logged in branch. This recall will require a transfer.
Recall not needed after (expiration date): whatever you want
Select 'recall next available item'
Click confirm
69. In the staff client, check in Item A at Branch A. Notice the box that pops up shows that a transfer is required.
70. Click "confirm recall and transfer" and confirm the transfer.
71. Go to your account and click the Recalls tab.
72. Confirm the recall status now shows the item is in transit to Branch B.
73. In the drop-down top-right of your window, select 'Set library'.
74. Set your library to Branch B.
75. Go to Circulation -> Transfers to receive. Notice that the recall is showing here.
76. Click 'Cancel transfer'.
77. Go to Circulation -> Recalls queue
78. Confirm the recall status has been reverted to Requested.
79. Set your library back to Branch A.
80. Check in Item A and trigger the transfer.
81. Set your library back to Branch B.
82. Check in Item A at Branch B.
83. When the 'Recall found' box pops up, click Ignore.
84. Go to Circulation -> Recalls to pull. The recall should show here, with a button to "Cancel recall and return to: Branch A"
85. Click the button to cancel the recall.
86. Repeat Steps 66-70.
87. Check in Item A at Branch B. Confirm the recall as waiting.
88. Check out Item A to Borrower A to fulfill the recall.
89. Set your library back to Branch A and check in Item A.
ITEM-LEVEL RECALL, NO TRANSFER
90. Go to Administration -> circulation rules. Set the following rules:
On shelf recalls allowed ( If any unavailable / If all unavailable ) = If all unavailable
91. Check out Item A to Borrower B.
92. Log in to the OPAC as Borrower A and go to Biblio A.
93. Click the 'Place recall' button. Confirm there is a message that there are no items to recall. This is because On shelf recalls allowed = If all unavailable, and there is still one item (Item B) available.
94. In the staff client, edit Item B to have a withdrawn, item lost or not for loan status.
95. Refresh the 'Place recall' page. Confirm you can now see the form to place a recall.
96. Place an item-level recall.
Pickup location: Branch A.
Recall not needed after (expiration date): whatever you want
Select 'recall a specific item'
Item B will not be selectable, and Item A should be selected by default.
Click confirm
97. In the staff client, edit Item B and remove the lost or missing status.
98. Check in Item B. Confirm the recall box does not pop up, because it cannot fill the item-level recall.
99. Check in Item A. Confirm the recall as waiting.
100. Go to Circulation -> Recalls awaiting pickup
101. Expire the recall. Confirm it expires as expected.
ITEM-LEVEL RECALL, TRANSFER REQUIRED
102. Repeat steps 91 to 95.
103. Place an item-level recall.
Pickup location: Branch B, we will require a transfer.
Recall not needed after (expiration date): whatever you want
Select 'recall a specific item'
Item B will not be selectable, and Item A should be selected by default.
Click confirm
104. In the staff client, check in Item A. Confirm the recall and trigger the transfer.
105. Set your library to Branch B and check in Item A.
106. Confirm the recall as waiting.
107. Check out Item A to Borrower A and fulfill the recall.
108. Set your library back to Branch A and check in Item A.
CRONJOBS: EXPIRING RECALL
109. Check out Item A to Borrower B.
110. Log in to the OPAC as Borrower A. Place a recall (any level) on Biblio A.
111. In your terminal, enter mysql and edit the expiration date of your recall to be before today
UPDATE recalls SET expirationdate = NOW()-2 WHERE recall_id = X;
112. Run the expiry cronjob from within your shell
perl misc/cronjobs/recalls/expire_recalls.pl
113. Go to Borrower A's account and go to the Recalls history tab
114. Confirm the recall has been expired because the current date surpassed the specified expiration date
115. Check out Item A to Borrower B.
116. Log in to the OPAC as Borrower A. Place a recall (any level) on Biblio A.
117. In the staff client, check in Item A and confirm the recall as waiting.
118. In your terminal, enter mysql and edit the waiting date of your recall to be before today
UPDATE recalls SET waitingdate = NOW() - interval 5 day WHERE recall_id = X;
119. Run the expiry cronjob from within your shell
perl misc/cronjobs/recalls/expire_recalls.pl
120. Go to Borrower A's account and go to the Recalls history tab
121. Confirm the recall has been expired because the recall had been waiting for more days than the Recall pickup period
122. Go to Administration -> circulation rules. Set the following rules:
Recall pickup period (days) = 0
123. Set the RecallsMaxPickUpDelay system preference = 1.
124. Check out Item A to Borrower B.
125. Log in to the OPAC as Borrower A. Place a recall (any level) on Biblio A.
126. In the staff client, check in Item A and confirm the recall as waiting.
127. In your terminal, enter mysql and edit the waiting date of your recall to be before today
UPDATE recalls SET waitingdate = NOW()-2 WHERE recall_id = X;
128. Run the expiry cronjob from within your shell
perl misc/cronjobs/recalls/expire_recalls.pl
129. Go to Borrower A's account and go to the Recalls history tab
130. Confirm the recall has been expired because the recall had been waiting for more days than the RecallsMaxPickUpDelay syspref
CRONJOBS: OVERDUE RECALL
131. Check out Item A to Borrower B
132. Log in to the OPAC as Borrower A. Place a recall (any level) on Biblio A.
133. In your terminal, enter mysql and edit the due date of the checkout to Borrower B to be before today
UPDATE issues SET date_due = NOW()-2 WHERE issue_id = X;
134. Run the overdue cronjob from within your shell
perl misc/cronjobs/recall/overdue_recalls.pl
135. Go to Circulation -> Overdue recalls
136. Confirm your recall is showing here now as the recall has been marked Overdue
CIRCULATION
137. Check in Item A.
138. When the recall box pops up, click Ignore.
139. Check out Item A to Borrower B. You should see a yellow confirmation box, saying that another borrower has recalled the item you are trying to check out.
140. Click "No don't check out" and confirm the item isn't checked out and the recall remains.
141. Repeat Step 139.
142. Click "Yes check out" and confirm the item is checked out and the recall remains.
143. When Borrower B's checkout table loads, confirm that you cannot renew or check in the item from the Checkouts table because there is a 'Recalled' link which takes you to the recalls tab for that biblio.
144. Repeat Steps 137-139.
145. Select "Cancel recall" and click "Yes check out" and confirm the item is checked out and the recall has been cancelled.
146. Log in to the OPAC as Borrower A. Place a recall (any level) on Biblio A.
147. Check in Item A. Confirm the recall as waiting.
148. Check out Item A to Borrower B. You should see a yellow confirmation box, saying that that another borrower has recalled the item that you are trying to check out.
149. Select "Revert waiting status" and click "Yes check out" and confirm the item is checked out and the recall status has reverted to requested.
OTHER
150. In your terminal, enter mysql and edit the due date of the checkout to Borrower B to be before today
UPDATE issues SET date_due = NOW()-2 WHERE issue_id = X;
151. Go to Borrower A's recalls and click the Actions dropdown.
152. Click "Mark as overdue" and confirm the recall is marked as overdue manually.
153. Go to Tools -> Log Viewer. Check only the Recalls module, and leave all other parameters, and click Submit.
154. Confirm all of the recalls actions that have been made are correctly logged.
Note: recalls messaging preferences are introduced in Bug 23781.
The recall feature is fully documented at: https://wiki.koha-community.org/wiki/Catalyst_IT_Recalls
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
On bug 29844 we decided to remove wantarray from Koha::Objects->search.
Reviewing the difference occurrences I found some unnecessary uses of ->as_list,
where iterators should be used instead.
This patch only removes the obvious places, not the tricky ones.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
and some more...
There are lot of inconsistencies in our ->search calls. We could
simplify some of them, but not in this patch. Here we want to prevent
regressions as much as possible and so don't add unecessary changes.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
On bug 17591 we discovered that there was something weird going on with
the way we export and use subroutines/modules.
This patch tries to standardize our EXPORT to use EXPORT_OK only.
That way we will need to explicitely define the subroutine we want to
use from a module.
This patch is a squashed version of:
Bug 17600: After export.pl
Bug 17600: After perlimport
Bug 17600: Manual changes
Bug 17600: Other manual changes after second perlimports run
Bug 17600: Fix tests
And a lot of other manual changes.
export.pl is a dirty script that can be found on bug 17600.
"perlimport" is:
git clone https://github.com/oalders/App-perlimports.git
cd App-perlimports/
cpanm --installdeps .
export PERL5LIB="$PERL5LIB:/kohadevbox/koha/App-perlimports/lib"
find . \( -name "*.pl" -o -name "*.pm" \) -exec perl App-perlimports/script/perlimports --inplace-edit --no-preserve-unused --filename {} \;
The ideas of this patch are to:
* use EXPORT_OK instead of EXPORT
* perltidy the EXPORT_OK list
* remove '&' before the subroutine names
* remove some uneeded use statements
* explicitely import the subroutines we need within the controllers or
modules
Note that the private subroutines (starting with _) should not be
exported (and not used from outside of the module except from tests).
EXPORT vs EXPORT_OK (from
https://www.thegeekstuff.com/2010/06/perl-exporter-examples/)
"""
Export allows to export the functions and variables of modules to user’s namespace using the standard import method. This way, we don’t need to create the objects for the modules to access it’s members.
@EXPORT and @EXPORT_OK are the two main variables used during export operation.
@EXPORT contains list of symbols (subroutines and variables) of the module to be exported into the caller namespace.
@EXPORT_OK does export of symbols on demand basis.
"""
If this patch caused a conflict with a patch you wrote prior to its
push:
* Make sure you are not reintroducing a "use" statement that has been
removed
* "$subroutine" is not exported by the C4::$MODULE module
means that you need to add the subroutine to the @EXPORT_OK list
* Bareword "$subroutine" not allowed while "strict subs"
means that you didn't imported the subroutine from the module:
- use $MODULE qw( $subroutine list );
You can also use the fully qualified namespace: C4::$MODULE::$subroutine
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch creates a new include for showing circulation and
patron-related messages on both the checkout page and the patron detail
page. This allows the two pages to be consistent with each other.
The patch also makes some minor CSS adjustments, including the addition
of an SVG to replace an old GIF, arrow-bullet.gif.
To test, apply the patch and rebuild the staff interface CSS
(https://wiki.koha-community.org/wiki/Working_with_SCSS_in_the_OPAC_and_staff_client).
- View both the checkout and patron details page for patrons in the
staff interface, confirming that the information is displayed in the
same way, including:
- Pending modifications
- Pending expiration
- Expired
- Address in doubt
- Card lost
- Restricted (indefinite and with expiration)
- Outstanding overdues
- Outstanding return claims
- Patron age incorrect for their category
- Outstanding charges
- Account credit
- Waiting holds (at logged-in library or other library)
- Circulation note (from borrowers.borrowernotes)
- Messages (added at logged-in library or other library)
EDIT: Fixed merge error.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
We should remove the debug statements or use Koha::Logger when we want
to keep it.
Test plan:
Confirm that occurrences of remaining occurrences of DEBUG need to be
kept (historical scripts for instance)
Confirm that the occurrences removed by this patch can be removed
Confirm that the occurrences replaced by Koha::Logger are correct
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Looks good to me, noting a few minor points on BZ.
JD amended patch: replace "warn #Finished" with "#warn Finished", and
put the statement on a single line
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
There is a "debug" parameter we are passing from the controller scripts
to C4::Auth::get_template_and_user, but it's not actually used!
Test plan:
Confirm the assumption
Review the changes from this patch
Generated with:
perl -p -i -e 's#\s*debug\s*=\>\s*(0|1),?\s*##gms' **/*.pl
git checkout misc/devel/update_dbix_class_files.pl # Wrong catch
+ Manual fix in acqui/neworderempty.pl
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
It defaults to 0 in get_template_and_user
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds a section to the patron details page for listing files
which have been attached to the patron record.
To test, apply the patch and enable the EnableBorrowerFiles system
preference.
- If necessary, attach some files to a patron record by viewing a patron
record and choosing "Files" from the sidebar menu.
- View the detail page (moremember.pl) for a patron who has files
attached.
- You should see a new section under "Alternative contact" with the
heading "Files."
- Test the "Manage" button to make sure it takes you to that patron's
files.
- Confirm that all the attached files are listed.
- Confirm that the links to each file work correctly.
Signed-off-by: Sally <sally.healey@cheshiresharedservices.gov.uk>
Signed-off-by: Barbara Johnson <barbara.johnson@bedfordtx.gov>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
JD amended patch: replace a html filter with uri
Bug 21345: (follow-up) Hide files information if EnableBorrowerFiles is disabled
This patch wraps the new patron file information in a check for the
EnableBorrowerFiles system preference.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Test plan:
0) Apply the patch
1) Go to all of these pages
Patron detail
Other patron pages - look on the left side (circ-menu)
Patron search
Guarantor search ( go to child patron -> edit -> in guarantor
section click "Set to patron"
Search through "Check out" (in the header)
2) Confirm that does show date of birth and date consistantly,
try it on patrons with and without date of birth set to find
possible reggressions
Signed-off-by: Aleisha Amohia <aleishaamohia@hotmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Dealt with that previously in the module during the rebase.
It conflicted with bug 23281.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
We do no longer need this package, we can use
Koha::Patron::Attribute::Types directly instead.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
We can then now start to move methods from C4::Members::AttributeTypes
as well.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch replace Koha::Patron->get_extended_attributes with
->extended_attributes
It's now a getter a setter method.
It permits to replace UpdateBorrowerAttribute and use
create_related from DBIx::Class
Notes:
* We face the same variable names difference than in a previous patch
(value vs attribute)
Bug 20443: Remove SetBorrowerAttributes
squash + RM get_extended_attributes
RM get_extended_attributes
SQUASH Bug 20443: Remove UpdateBorrowerAttribute and SetBorrowerAttribute
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
The GetBorrowerAttributes subroutine return the attributes for a given
patron.
Using get_extended_attributes we can acchieve it easily. The problematic
here is to restore the method's name (value vs attribute,
value_description vs description of the authorised value, as well as
display_checkout that should not be a method of Attribute, but
Attribute::Type instead)
value_description was used when the attribute types were attached to an
authorised value category. To avoid the necessary test in template and
controller there is now a $attribute->description method that will
display either the attribute's value OR the value of the authorised
value when needed. We should certainly use this one from few other
places.
Notes:
* This patch rename Koha::Patron->attributes with Koha::Patron->get_extended_attributes.
It will be renamed with Koha::Patron->extended_attributes in ones of the next
patches when it will become a setter as well.
* GetBorrowerAttributes did not care about the library limits, we still
do not
* The opac_only flag was not used outside of test, we drop it off.
* To maintain the existing behavior we add a default order-by clause to
the search method [code, attribute]
* From C4::Letters::_parseletter we always display the staff description
of the AV, There is now a FIXME to warn about it
* FIXMEs are not regressions, existing behaviors must be kept
* TODO add a new check to bug 21010 to search for inconsistencies in
patron's attributes attached to non-existent authorised values
* One test has been updated in Modifications.t, order_by is now
by default set to ['code', 'attribute']
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This adds a "Claims returned" feature that extends and enhances the claims returned lost status.
To use this feature, a new LOST status to represent an item claimed as returned needs to be created.
The value of this LOST authorised value should be set in the new syspref ClaimReturnedLostValue.
Setting this system preference turns on the feature.
Once the feature is enabled, you should be able to mark checked out items as return claims from the
checkout and patron details pages, and also modify them from the new claims tab on those pages.
Returning a claimed item will notify the librarian that the item in question has a claim on it.
Setting the ClaimReturnedWarningThreshold will add an alert to make librarians aware that this
patron has many return claims on the patron's record.
Test Plan:
1) Create a "Claims Returned" lost value
2) Create some RETURN_CLAIM_RESOLUTION authorized values
3) Set ClaimReturnedLostValue
4) Set ClaimReturnedChargeFee
5) Set ClaimReturnedWarningThreshold
6) Create some checkouts
7) Claim some returns
8) Verify ClaimReturnedChargeFee works with all 3 options
9) Verify ClaimReturnedWarningThreshold shows a warning once the threshold has been exceeded
10) Edit notes on a claim
11) Resolve a claim
12) Delete a claim
Sponsored-by: North Central Regional Library System
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Lisette Scheer <lisetteslatah@gmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch adds the ability to set an unlimited number of guarantors
for a given patron. As before, each guarantor may be linked to another
Koha patron, and all the behavior that applies to a given guarantor
remains the same.
Test Plan:
1) Apply this patch
2) Run updatedatabase.pl
3) Find some patrons with guarantors, verify the still have their guarantor
4) Test adding and removing guarantors on a patron record, both Koha users and not
5) Verify the "Add child" button works
6) Verify NoIssuesChargeGuarantees still works
7) Verify tools/cleanborrowers.pl will not delete a guarantor
8) Verify the guarantors are displayed on moremember.pl
9) Verify the guarantor is removed by members/update-child.pl
10) Verify the guarantor is removed by misc/cronjobs/j2a.pl
11) Verify import patrons converts guarantor_id, relationship, contactfirstname,
and contactsurname into a guarantor
12) prove t/Patron.t
13) prove t/db_dependent/Circulation.t
14) prove t/db_dependent/Circulation/NoIssuesChargeGuarantees.t
15) prove t/db_dependent/Items.t
16) prove t/db_dependent/Koha/Patrons.t
17) prove t/db_dependent/Members.t
18) prove t/db_dependent/Patron/Relationships.t
Signed-off-by: Kim Peine <kmpeine@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Agustin Moyano <agustinmoyano@theke.io>
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Changed the method introduced into Koha::Patron from is_category_valid
to the more specific is_valid_age to clarify it's intent to future
developers.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch adds a warning if a patron's age is out of limits if an assigned category.
It also adds a button allowing to change the category.
Test plan:
1) Apply patch
2) Create a patron and assign him a category having age limits set
3) Change patron's age to be older/younger than category's limits
4) At "Check out" and "Details" tabs you should see a warning with a
button allowing to change the category, eg.:
- http://prntscr.com/cz7ch3
- http://prntscr.com/cz7em4
- http://prntscr.com/cz7dj1
5) Set a valid category according to patron's age
6) Warning should disappear
7) Perform similar test again, but instead of changing the age change
the limits of a category
8) During tests verify "Change category" button everytime opens "Modify
patron" page:
http://prntscr.com/cz7g5q
9) Ensure that left-side panel is always on its expected place
10) Remove patron's date of birth and test that all categories are
allowed now
11) Run automated tests: prove t/db_dependent/Koha/Patron.t
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Aleisha Amohia
Jacob O'Mara
Martin Renvoize
Laura_Escamilla
Tomas Cohen Arazi
Aleisha Amohia
Emily Lamancusa
Nick Clemens
Jonathan Druart
Andrew Fuerste Henry
Koha Development Team
Matt Blenkinsop
Fridolin Somers
Thibaud Guillot
Michael Hafen
Lucas Gass
Maryse Simard
Martin Renvoize
Andrew Isherwood
Owen Leonard
Josef Moravec
Kyle M Hall
Radek Šiman