As a continuation of bug 41919, we should limit the total number of simultaneous reports that can be run at a time.
Test Plan:
1) Set total_running_reports_per_instance_limit to 2 in your koha-conf.xml
2) Create 3 long running reports like: SELECT COUNT(*) FROM items i1 JOIN items i2 JOIN items i3 JOIN items i4 JOIN items i5 JOIN items i6
3) Run each report in turn by opening a new tab, browsing to the reports
module, and choosing to run that report
5) Note the first two continue to run, but the last one gives an error
that you have too many reports running simultaneously!
Signed-off-by: Alex Carver [Acerock7] <alex@rcls.org>
Signed-off-by: Andrew Fuerste Henry <andrew@bywatersolutions.com>
Signed-off-by: Pedro Amorim <pedro.amorim@openfifth.co.uk>
Building on bug 41918, it would be good to limit the number of reports
a given user can run at a time. This control is config-file based as
it is tied to the server resources provided by the administrator.
Adds a new koha-conf.xml option total_running_reports_per_user_limit
(0 = disabled). When the configured limit is reached, the user is told
"You have too many reports running at the moment. Please wait for some
of them to finish before running this report again."
Note on implementation: the original patch on bz (attachment 198034)
performed a second pre-flight Koha::Reports->running call in
reports/guided_reports.pl. The bug 41918 QA follow-ups already pushed
the duplicate-running guard into Koha::Report::prep_report so it would
fire across the staff UI, svc/report and opac/svc/report. This patch
extends that same model-layer architecture rather than reintroducing
controller-layer enforcement:
- New Koha::Exceptions::Report::TotalRunning subclass of
Koha::Exceptions::Report.
- prep_report now performs a second check after the duplicate one and
throws TotalRunning when the user has total_running_reports_per_user_limit
reports of any kind already in flight.
- All three callers (guided_reports.pl, svc/report, opac/svc/report)
catch the new exception alongside DuplicateRunning, mapping it to a
new template error key total_running_reports_limit_exceeded for the
staff UI and a JSON {error: total_running_reports_limit_exceeded}
with HTTP 429 for the JSON endpoints.
Test Plan:
1) Set total_running_reports_per_user_limit to 3 in your koha-conf.xml.
2) Create 3 long-running reports like:
SELECT COUNT(*) FROM items i1 JOIN items i2 JOIN items i3 JOIN items i4 JOIN items i5 JOIN items i6
3) Run each report in turn by opening a new tab, browsing to the
reports module, and choosing to run that report.
4) Note the first three continue to run, but a fourth attempt gives
the new "too many reports running" alert in the staff UI.
5) Repeat against /cgi-bin/koha/svc/report?id=N and confirm an HTTP
429 response with JSON {error: total_running_reports_limit_exceeded}.
6) Set total_running_reports_per_user_limit back to 0 and confirm
normal behaviour resumes.
7) prove t/db_dependent/Koha/Reports.t -> 13 tests pass, including a
new subtest for TotalRunning.
Signed-off-by: Alex Carver [Acerock7] <alex@rcls.org>
Signed-off-by: Martin Renvoize <martin.renvoize@openfifth.co.uk>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This commit add the option duplicate_running_reports_per_user_limit to
koha-conf.xml. If this option is empty or 0, the feature is disabled. If
this option is enabled, Koha will limit the number of times a given
report can be run of a single Koha user.
Test Plan:
1) Apply this patch
2) Set duplicate_running_reports_per_user_limit to 1, verify previous
behavior is maintained
2) Set duplicate_running_reports_per_user_limit to 0, verify the feature
is disabled
3) Set duplicate_running_reports_per_user_limit to 2, verify Koha limits
the number of duplicates of the report to the number specified in duplicate_running_reports_per_user_limit
Signed-off-by: Alex Carver [Acerock7] <alex@rcls.org>
Signed-off-by: Martin Renvoize <martin.renvoize@openfifth.co.uk>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
By defining a default policy in the Perl module, we can easily update
it over time. Using koha-conf.xml will just be for overrides, so people
can manage their own there.
Signed-off-by: Lari Taskula <lari.taskula@hypernova.fi>
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
report-uri is deprecated, replaced by report-to and Reporting-Endpoints.
To test:
1. prove t/db_dependent/Koha/Middleware/ContentSecurityPolicy.t
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Add /api/v1/public/csp-reports endpoint to receive and log
Content-Security-Policy violation reports from browsers.
When CSP is configured with a report-uri directive pointing to this
endpoint, browsers will POST violation reports whenever a CSP rule
is violated. These reports are logged using Koha's logging system
for administrator review.
Features:
- Public endpoint (no authentication required, as browsers send
these reports automatically)
- Logs violations at WARN level with key details (violated directive,
blocked URI, document URI, source location)
- Logs full report at DEBUG level for detailed analysis
- Accepts both application/csp-report and application/json content types
Configuration example (in koha-conf.xml csp_header_value):
...; report-uri /api/v1/public/csp-reports
Log4perl configuration to capture CSP violations:
log4perl.logger.api.csp = WARN, CSP
log4perl.appender.CSP = Log::Log4perl::Appender::File
log4perl.appender.CSP.filename = /var/log/koha/csp-violations.log
log4perl.appender.CSP.layout = PatternLayout
log4perl.appender.CSP.layout.ConversionPattern = [%d] %m%n
Also updates koha-conf.xml documentation with CSP configuration guidance.
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Lari Taskula <lari.taskula@hypernova.fi>
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This change adds "style-src-attr 'unsafe-inline';" to the default CSP policy.
The reason is that we have a lot of inline styles throughout Koha,
and it will take a long time to clean those up. Also, the WYSIWYG/TinyMCE
editor injects inline styles, so it might not be possible to forbid
unsafe inline styles in Koha.
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Martin Renvoize <martin.renvoize@openfifth.co.uk>
Signed-off-by: Lari Taskula <lari.taskula@hypernova.fi>
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Martin Renvoize <martin.renvoize@openfifth.co.uk>
Signed-off-by: Lari Taskula <lari.taskula@hypernova.fi>
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Martin Renvoize <martin.renvoize@openfifth.co.uk>
Signed-off-by: Lari Taskula <lari.taskula@hypernova.fi>
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomás Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@openfifth.co.uk>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This patch adds a new configuration entry in `koha-conf.xml` for making
it possible to set a different `batch_size` for `koha-es-indexer`.
The current implementation has a default of *10* that can be overridden
using the CLI parameter `--batch_size N`.
Unfortunately, if you restart the server or the service without passing
the parameter, it will be set back to 10. This patch solves that by
adding a new config entry and making the script use it. The passed CLI
parameter will keep overridding the configured value.
To test:
1. Run:
$ ktd --shell
k$ koha-es-indexer --restart --batch_size 100 kohadev
k$ ps -ef | grep elastic
=> SUCCESS: No errors. Notice '100' is passed to the called perl script
2. Run:
k$ koha-es-indexer --restart kohadev
k$ ps -ef | grep elastic
=> FAIL: Notice '10' is the new value
3. Apply this patch
4. Run:
k$ reset_all
5. Repeat 1 and 2
=> SUCCESS: '100' is kept.
6. Try standalone `--start` too
7. Sign off :-D
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@openfifth.co.uk>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Tomás Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@openfifth.co.uk>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
See comment30 and comment36.
Result of two sed's:
git grep -l test_system | xargs sed -i -e "s/test_system/debug_mode/g"
git grep -l TEST_SYSTEM | xargs sed -i -e "s/TEST_SYSTEM/DEBUG_MODE/g"
The next patch will take care of the debugger options in the plack and
z3950 responder scripts.
Test plan:
Read the patch. (Testing in next patch.)
git grep -i test_system
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Test plan:
Look at changes in this patch.
Note that we already tested these settings with former patches.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Test plan:
Just read the patch.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Paul Derscheid <paul.derscheid@lmscloud.de>
Signed-off-by: Martin Renvoize <martin.renvoize@openfifth.co.uk>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
The cron can take a very long time to run on systems with many issues.
For example, a partner with ~250k auto_renew issues is taking about 9 hours to run.
If we run that same number of issues in 5 parallel chunks
( splitting the number of issues as evenly as possible ), it could take under 2 hours.
Test Plan:
1) Generate a number of issues marked for auto_renew
2) Run the automatic_renewals.pl, use the `time` utility to track how much time it took to run
3) Set parallel_loops to 10 in auto_renew_cronjob section of config in koha-conf
4) Repeat step 2, note the improvement in speed
5) Experiment with other values
Signed-off-by: Matt Blenkinsop <matt.blenkinsop@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch adds some commented Elasticsearch security configuration,
which shows how to use username/password with HTTPS.
Test plan:
0. Apply patch
1. cp debian/templates/koha-conf-site.xml.in /etc/koha/koha-conf-site.xml.in
2. koha-create --create-db test
3. vi /etc/koha/sites/test/koha-conf.xml
4. Note that the comments for userinfo and use_https are in the koha-conf.xml
Signed-off-by: Magnus Enger <magnus@libriotech.no>
Works as advertised.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch enabled the restart by default.
After a poll at hackfest24 we opted to enable this by default and the RM
requested I add the patch to the bug so we don't forget ;)
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch adds the ability to disable the automated plack restart we
introduce with this patchset via configuration.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Whne performing batch operations we can send a large numebr of records for reindexing at once.
Currently this can create requetss that are too large for Elasticsearch to process. We need
to break these requests into chunks/
This patch adds a chunk_size configuration to the elasticsearch stanza in koha-conf.xml
If blank we default to 5000.
To test:
0 - Have Koha using Elasticsearch
1 - Create and download a report of all barcodes:
SELECT barcode FROM items
2 - Batch modify these items
3 - Note a single ESindexing job is created
4 - Create and download a report of all authority ids:
SELECT auth_header.authid FROM auth_header
5 - Setup a marc modification template, and batch modify all the authorities
6 - Again note a single ES backgorund job is created
7 - Apply patch
8 - Repeat the modifications above - you still get a single job
9 - Edit koha-conf.xml and add <chunk_size>250</chunk_size> to elasticsearch stanza
10 - Repeat modifications - you now get several background ES jobs
11 - prove -v t/db_dependent/Koha/SearchEngine/Elasticsearch/Indexer.t
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
I think instead of a plain on/off switch we should use it in combination
with the plugin_repo's and set it to restrict to only those repos' (i.e.
disable uploads entirely if no repo's are listed, or just allow those
repo's when there are).
This patch achieves that, but only if plugins are installed via the
plugin browser method. We disable all direct upload avenues, so install
is blocked for other cases.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch enables enable_plugin_browser_upload by default,
since the current behaviour for Koha is to enable browser upload
when enable_plugins is 1.
Signed-off-by: Nicolas Legrand <nicolas.legrand@bulac.fr>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds a enable_plugin_browser_upload flag to koha-conf.xml, which
controls whether or not Koha intranet users can upload Koha plugins via
their browser. Like "enable_plugins", it defaults to 0 for new installs.
This is useful when you want to provide Koha intranet users with plugins
that are pre-installed by administrators (by CLI) or restricting them
to plugins from a Github repo. See the following for more information:
Bug 23975 - Add ability to search and install plugins from GitHub
Bug 23191 - Administrators should be able to install plugins from the command line
To test:
1) Apply the full patchset
2) Confirm <enable_plugins>1</enable_plugins> is present in koha-conf.xml
3) Add <plugins_restricted>1</plugins_restricted> to koha-conf.xml
4) Ensure that the <plugin_repos> block is not commented and contains at
least one trusted organisation in koha-conf.xml
If needed get it from: debian/templates/koha-conf-site.xml.in
5) Run restart_all (in koha-testing-docker)
6) Go to /cgi-bin/koha/plugins/plugins-home.pl and note that you don't see
an option to upload plugins
7) You should however see a search option and upon search you should have
results returned from the chosen trusted organisations listed in the
<plugin_repos> block mentioned above.
8) Clicking install on one of the results should work as expected and install
the plugin.
9) Go directly to /cgi-bin/koha/plugins/plugins-upload.pl and note that it says
"Plugin upload is restricted to only those plugins listed by your server
administrator" and gives instructions on how to enable unrestricted browser
upload.
Signed-off-by: Nicolas Legrand <nicolas.legrand@bulac.fr>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: David Cook <dcook@prosentient.com.au>
Rebased-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This change adds a mfa_range configuration option for TOTP
to koha-conf.xml, and overrides the "verify" method from
Auth::GoogleAuth in order to provide a new default for "range"
Test plan:
0. Apply the patch
1. koha-plack --restart kohadev
2. Go to
http://localhost:8081/cgi-bin/koha/admin/preferences.pl?op=search&searchfield=TwoFactorAuthentication
3. Change the syspref to "Enable"
4. Go to
http://localhost:8081/cgi-bin/koha/members/moremember.pl?borrowernumber=51
5. Click "More" and "Manage two-factor authentication"
6. Register using an app
7. In an Incognito window, go to
http://localhost:8081/cgi-bin/koha/mainpage.pl
8. Sign in with the "koha" user
9. Note down a code from your Authenticator app
10. Wait until after 60 seconds and try it
11. Note it says "Invalid two-factor code"
12. Try a new code from the app
13. Note that it works
14. Add <mfa_range>10</mfa_range> to /etc/koha/sites/kohadev/koha-conf.xml
15. Clear memcached and koha-plack --restart kohadev
16. Sign in with the "koha" user
17. Note down a code from your Authenticator app
18. Wait 4 minutes and then try it
19. Note that it works
20. Disable your two-factor authentication and click to re-enable it
21. Use a code older than 60 seconds when registering for the two
factor authentication
22. Note that the code works
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
from debian and /etc koha-conf.xml files
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test plan:
We already tested it. Just look at changes in this patch.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch updates the default partner category used by the partner_code config to be in line with sample data in sample_patrons.yml
Preparation:
Apply patch
Enable ILLModule sys pref
Install an ILL backend (e.g. FreeForm)
Add this change to your koha-conf.xml
Flush, restart.
Search for patron of category inter-library loan and assign a primary e-mail address to it
Test plan:
Create an ILL request and click 'place request with partners'
Verify that the 'select partner libraries' has the correct patron of IL category
Run tests and ensure they pass:
prove t/db_dependent/Illrequest/Config.t
prove t/Koha/Config.t
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Right now background_jobs_worker.pl only processes jobs in serial. It would make sense to handle jobs in parallel up to a user definable limit.
Test Plan:
1) Apply this patch
2) Stop background_jobs_worker.pl
3) Generate some background jobs by editing records, placing holds, etc
4) Watch processes in a new terminal: watch -n 0.1 'ps aux | grep background_jobs_worker.pl'
5) Run background_jobs_worker.pl with parameter -m 3 or some other
number of max processes
6) Note the multiple forked processes in the ps output
Test notes - also tested the following on KTD:
1. Stop background_jobs_worker.pl
2. Edit /etc/koha/sites/kohadev/koha-conf.xml - set max_processes to 10
3. Generate some background jobs
4. Watch processes in a new terminal: watch -n 0.1 'ps aux | grep background_jobs_worker.pl'
5. Restart all
6. Confirm multiple forked processes in the ps output
Both methods work as expected and generate multiple forked processes
based on the value set for max processes.
Signed-off-by: emlam <emily.lamancusa@montgomerycountymd.gov>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This followup moves the configuration to the z3950 etc file, either the
default and or the custom file is used as per the existing script code.
In addition, the options and be set using an environment variable named Z3950_ADDITIONAL_OPTS.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The z39.50 responder has a number of command line options that are not
accessible if using the debian scripts to control it. We should be able
to set those options in the koha conf file to be passed to the script
itself.
Test Plan:
1) Apply this patch
2) Copy your kohaclone's koha-z3950-responder to /usr/sbin/koha-z3950-responder if necessary
3) Add "<z3950_responder_options>--add-item-status k</z3950_responder_options>" inside your <config> block in your koha-conf.xml file
4) Use koha-z3950-responder to start/restart the z39.50 responder, note the item status is now in subfield k!
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds <zebra_connection_timeout>30</zebra_connection_timeout>
to the koha-conf.xml file.
Sometimes, a Zebra search might take longer than 30 seconds. If it does,
Koha will say that 0 records have been found. While slow searching
is not desirable, it's more desirable to get the result set regardless.
Test plan:
0. Apply patch
1. Add <zebra_connection_timeout>.1</zebra_connection_timeout> to
your relevant koha-conf.xml file (e.g. /etc/koha/sites/kohadev/koha-conf.xml)
2. echo 'flush_all' | nc -q 1 memcached 11211
3. koha-plack --restart kohadev
4. Go to http://localhost:8081/cgi-bin/koha/catalogue/search.pl?q=test
5. Note that no results are returned
6. Change zebra_connection_timeout to 30
7. echo 'flush_all' | nc -q 1 memcached 11211
8. koha-plack --restart kohadev
9a. Go to http://localhost:8081/cgi-bin/koha/catalogue/search.pl?q=test
9b. Note that 3 results are returned
10. Remove zebra_connection_timeout from koha-conf.xml
11. echo 'flush_all' | nc -q 1 memcached 11211
12. koha-plack --restart kohadev
13a. Go to http://localhost:8081/cgi-bin/koha/catalogue/search.pl?q=test
13b. Note that 3 results are returned
14. Celebrate
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
As requested by Jonathan, we need more flexibility ;)
Here it comes.
Test plan:
Run t/CookieManager.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test plan:
Add this change to your koha-conf.xml.
Flush, restart.
Test if the cookie is kept now in the interface.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
In Koha, any report that uses C4::Reports::Guided will be limited to 999,999 rows. This is causing problems for larger libraries where some reports may have over a million results.
Test Plan:
1) Create a report "SELECT * FROM borrowers" and run it, note the number
of results
2) Apply this patch
3) Add the line `<report_results_limit>3</report_results_limit>`
within the <config> block of your koha-conf.xml
4) Restart all the things!
5) Run the report, download the results as a CSV
6) Note your CSV only has 4 lines, the header and 3 patrons
Signed-off-by: Rachael Laritz <rachael.laritz@inlibro.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test plan:
Just comments. Nothing to test.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Amended: using new name for deny list.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
The connection details for the message broker should be configurable.
This patch adds configuration options to koha-conf.xml. If they
are not specified, then default connection details will be used.
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This feature is not used as far as we know and it's not known to work.
It's preferable to remove it.
Test plan:
Make sure the OpacGroupResults pref code is removed, as well as the
PazPar2 files and code.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Sponsored-by: Theke Solutions
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
For debugging purposes we may wish to see the requests and responses made to
Elasticsearch
To test:
1 - prove -v t/Koha/SearchEngine/Elasticsearch.t
2 - Set <trace_to>Stderr</trace_to> in koha-conf
3 - Restart all
4 - perl misc/search_tools/rebuild_elasticsearch.pl
5 - Note requests are shown
6 - Set
<trace_to>File</trace_to>
<trace_to>/var/log/koha/kohadev/plack-error.log</trace_to>
in koha-conf
7 - Restart all
8 - perl misc/search_tools/rebuild_elasticsearch.pl
9 - Check the plack log and see the ES requests
Signed-off-by: Bob Bennhoff <bbennhoff@clicweb.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds an entry to koha-conf.xml for setting a default SMTP
server config. 'koha-create' gets option switches for all options.
To test:
1. Use the tweaked script to crete a new instance
2. Notice it contains entries for smtp_server and they respect your
options.
3. If you don't choose any option, it sets the current default.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
It was there already but not at the same place!
Signed-off-by: Didier Gautheron <didier.gautheron@biblibre.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Kyle M Hall
Martin Renvoize
Victor Grousset/tuxayo
David Cook
Lari Taskula
Tomás Cohen Arazi
Marcel de Rooy
Nick Clemens
Martin Renvoize
Pedro Amorim
Jonathan Druart