And list alphabetically on branchname
Signed-off by: Chris Rowlands <chris.rowlands6@nhs.net>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
(cherry picked from commit 8698c8f7c5)
Signed-off-by: Paul Derscheid <paul.derscheid@lmscloud.de>
Its tran_fail, not tran_error.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Lisette Scheer <lisette@bywatersolutions.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
(cherry picked from commit dbbdfaa7f2)
Signed-off-by: Paul Derscheid <paul.derscheid@lmscloud.de>
To test:
0: yarn css:build:prod
1. Set system preference ILLRequestsTabs:
- name: New
status:
- NEW
- name: Requested or reverted
status:
- REQ
- REQREV
- name: Queued
status:
- QUEUED
- name: Empty
status:
- NONEXISTENT
2. Add some ILL requests with the following SQL:
INSERT INTO `illrequests` (borrowernumber, branchcode, status, backend) VALUES (1, 'CPL', 'NEW', 'Standard');
INSERT INTO `illrequests` (borrowernumber, branchcode, status, backend) VALUES (1, 'CPL', 'NEW', 'Standard');
INSERT INTO `illrequests` (borrowernumber, branchcode, status, backend) VALUES (1, 'CPL', 'REQ', 'Standard');
INSERT INTO `illrequests` (borrowernumber, branchcode, status, backend) VALUES (1, 'CPL', 'REQREV', 'Standard');
INSERT INTO `illrequests` (borrowernumber, branchcode, status, backend) VALUES (1, 'CPL', 'QUEUED', 'Standard');
INSERT INTO `illrequests` (borrowernumber, branchcode, status, backend) VALUES (1, 'CPL', 'KILL', 'Standard');
3. Go to cgi-bin/koha/ill/ill-requests.pl
4. After the page loads, you should now see 4 different
tabs:
"All", "New", "Requested or reverted", "Queued", and
"Empty"
5. Confirm all ILL requests are present under "All" tab
6. Confirm only ILL requests with the statuses you defined
in system preference ILLRequestsTabs are under tabs
"New", "Requested or reverted" and "Queued"
7. Confirm no ILL requests are under tab "Empty"
8. Clear system preference ILLRequestsTabs
9. Observe only one tab "All" under which correct ILL
requests are presented
10. Try some other status values in ILLRequestsTabs and
observe expected behavior
Signed-off-by: Magnus Enger <magnus@libriotech.no>
Signed-off-by: Martin Renvoize <martin.renvoize@openfifth.co.uk>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Lisette Scheer <lisette@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Test plan, k-t-d:
0) Install the 'PluginBackend' plugin:
https://github.com/PTFS-Europe/koha-ill-backend-plugin/releases/tag/v2.0.6
1) Enable ILLModule syspref and check the "PluginBackend" backend in AutoILLBackendPriority:
http://localhost:8081/cgi-bin/koha/admin/preferences.pl?tab=interlibrary_loans
2) Create a new 'auto' ILL request:
http://localhost:8081/cgi-bin/koha/ill/ill-requests.pl?method=create&backend=Standard
3) Select type 'journal article', add '123' as DOI, '42' as cardnumber and any library
4) You should be on the automatic backend screen. The PluginBackend has a 50% chance to return available, so this step may suggest PluginBackend or Standard. Pick whatever was suggested. Click 'confirm'.
5) You are now on the request detail page. Click "Switch provider". You should be back on the automatic backend screen.
Repeat this step as many times needed to switch from Standard <-> PluginBackend multiple times. Ensure it always succeeds.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This is not used and not needed.
Noticed when evaluating every potential 'op'.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Sponsored-by: NHS England
Sponsored-by: PTFS Europe Ltd
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This commit is generated using:
% perl misc/devel/tidy.pl
*within* ktd, to get the same version of perltidy than what will be used
by our CI (currently v20230309).
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Test plan:
1) This patch should not be applied in order to be able to go through the previous patch's test plan
2) Install FreeForm, run:
bash <(curl -s https://raw.githubusercontent.com/ammopt/koha-ill-dev/master/start-ill-dev.sh)
3) Please note that you need to be using FreeForm's reorganize_ILL branch at:
https://github.com/PTFS-Europe/koha-ill-freeform/commits/reorganize_ILL/
4) Visit ILL page:
/cgi-bin/koha/ill/ill-requests.pl
5) Notice there's a configuration error preventing the use of the ILL module.
6) Click the 'about page' link and verify there is a warning about
FreeForm
7) Remove FreeForm from /kohadevbox/koha/Koha/Illbackends and refresh the page
8) Repeat 4), notice the requests are listed as expected and you can now
use the ILL module again.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
To test (k-t-d):
1) Enable ILLModule and install FreeForm, run:
bash <(curl -s https://raw.githubusercontent.com/ammopt/koha-ill-dev/master/start-ill-dev.sh)
2) Checkout 24.05.x branch, run:
cd /kohadevbox/koha/Koha/Illbackends/FreeForm
git checkout 24.05.x
3) Create a new ILL request from:
http://localhost:8081/cgi-bin/koha/ill/ill-requests.pl
4) Confirm the request creation works as before
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
The removal of 'cud-' from op needs to happen sooner
because ill-requests.tt expects 'edit_action' op,
not 'cud-edit_action'.
Signed-off-by: Pedro Amorim <pedro.amorim@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Following up from the test plan of the previous patch:
1) Edit the request again, input gibberish in the Patron ID e.g. 'asdasd'
2) Hit 'Submit'
3) Notice you get a 'The Patron ID you entered is invalid.' message.
4) Edit again, try to empty the input on the Patron ID, hit 'Submit'.
5) Notice it saves the patron as null, as expected
Repeat the test plan, but now for the Bibliographic record ID, notice
the message 'The Bibliographic record ID you entered is invalid.' is
shown if a no biblio was found.
Signed-off-by: David Nind <david@davidnind.com>
squash this
Signed-off-by: Pedro Amorim <pedro.amorim@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
1) Install FreeForm and enable ILLModule, run:
bash <(curl -s https://raw.githubusercontent.com/ammopt/koha-ill-dev/master/start-ill-dev.sh)
2) Checkout to branch b_36243
cd /kohadevbox/koha/Koha/Illbackends/FreeForm
git checkout b_36243
3) Enable CirculateILL sys pref
4) Create a new ILL request, visit:
<staff_url>/cgi-bin/koha/ill/ill-requests.pl?method=create&backend=FreeForm
5) Set "type" = Book and enter '42' on the cardnumber input, click "Create"
6) On the top toolbar, click "Confirm" and confirm the following screen.
7) You now have a new option "Check out" on the toolbar. Click on it. Notice it explodes.
8) Apply patch. Repeat.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Koha/Illrequests.pm -> Koha/ILL/Requests.pm
Merged:
t/db_dependent/Koha/Illrequests.t
t/db_dependent/Illrequests.t
Into:
t/db_dependent/Koha/ILL/Requests.t
ILL classes file structure is, for the most part, around 7 years old and doesn't follow a strict logic. It's so confusing that some test files exist redundantly.
This housekeeping should help future work in regards to ISO18626 to add Koha as a supplying agency instead of just requesting agency, as is now.
It should also help future housekeeping of moving backend related logic out of the Illrequest.pm into Illbackend.pm (now ILL/Request.pm and ILL/Backend.pm as of this patchset).
It should also help in structuring the addition of a master generic form (see bug 35570)
This patchset will require existing backends to be updated to match the new class names and structure, if they invoke them.
Test plan, k-t-d, run tests:
prove t/db_dependent/api/v1/ill_*
prove t/db_dependent/Koha/ILL/*
Test plan, k-t-d, manual:
1) Install FreeForm, enable ILL module, run:
bash <(curl -s https://raw.githubusercontent.com/ammopt/koha-ill-dev/master/start-ill-dev.sh)
2) You'll have to switch the FreeForm repo to the one compatible with this work, like:
cd /kohadevbox/koha/Koha/Illbackends/FreeForm
git checkout reorganize_ILL
3) Do some generic ILL testing:
3.1) Create a request
3.2) Add a comment to a request
3.3) Edit a request
3.4) Edit a request's item metadata
3.5) Confirm a request
3.6) List requests
3.7) Filter requests list using left side filters
4) Install a metadata enrichment plugin:
https://github.com/PTFS-Europe/koha-plugin-api-pubmed
4.1) Create an ILL batch and insert a pubmedid like 123
4.2) Add the request and finish batch
5) Verify all of the above works as expected
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Pedro Amorim <pedro.amorim@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Pedro Amorim <pedro.amorim@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Test plan, k-t-d, apply patches:
1) Install FreeForm backend, enable ILLModule sys pref, run:
bash <(curl -s https://raw.githubusercontent.com/ammopt/koha-ill-dev/master/start-ill-dev.sh)
2) Navigate to ILL requests, visit:
/cgi-bin/koha/ill/ill-requests.pl
3) Click '+New ILL request', select a type, enter an existing cardnumber (e.g. '42') and pick a library. Click 'Create'.
4) Visit ILL requests again, repeat 2)
5) Notice the row for the created request has the already existing action button 'Manage request'
6) Install the ILL actions plugin, located at:
https://github.com/PTFS-Europe/koha-plugin-ill-actions/releases/tag/v1.0.0
7) Restart plack, run:
koha-plack --restart kohadev
8) Repeat 4) and 5). Notice the row for the created request now has a new custom action in addition to the already existing core one.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
opac-shelves - forms were stateless - changed to GET
sco-main - forms stateless - changed to GET
** untested because sco + auth is broken
smart-rules.tt - JS form template - added placeholder 'cud-' op
ill-requests - added cud- tp ops
** tested comments, but not checkout, simple changes
boraccount - removed repeated op - updated script
patroncards/edit-batch - add placeholder 'cud-' op
patroncards/manage - add placheholder 'cud-' op
elasticsearch/mappings - separate forms - this could use a style follow-up, but makes more sense separate I think
reports/dictionary - stateless - changed to GET
guided_reports_start - stateless - changed to GET
suggestion/suggestion - add placeholder 'cud-' op
inventory - filed bug 36305, needs more handling
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
1) Install FreeForm, enable ILL module, run:
bash <(curl -s https://raw.githubusercontent.com/ammopt/koha-ill-dev/master/start-ill-dev.sh)
2) You'll have to switch the FreeForm branch to the one compatible with this work, i.e.:
cd /kohadevbox/koha/Koha/Illbackends/FreeForm
git checkout b_36243
3) Restart plack:
koha-plack --restart kohadev
4) Create a new FreeForm request, visit:
<staff_url>/cgi-bin/koha/ill/ill-requests.pl?method=create&backend=FreeForm
5) Set 'type' enter '42' in cardnumber and pick a library. Click 'Create'.
6) Edit that request, click "manage request" or if #1 visit:
<staff_url>/cgi-bin/koha/ill/ill-requests.pl?op=illview&illrequest_id=1
7) Click "Edit item metadata". Click "Submit". Notice it explodes.
9) Apply patch. Restart plack.
10) Repeat 7)
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Test plan, k-t-d:
1) Install FreeForm, enable ILL module, run:
bash <(curl -s https://raw.githubusercontent.com/ammopt/koha-ill-dev/master/start-ill-dev.sh)
2) You'll have to switch the FreeForm branch to the one compatible with this work, i.e.:
cd /kohadevbox/koha/Koha/Illbackends/FreeForm
git checkout b_36243
3) Restart plack:
koha-plack --restart kohadev
4) Start by adding an e-mail address to the patron of category "Inter-library Loan", visit:
<staff_url>/cgi-bin/koha/members/memberentry.pl?op=edit_form&destination=circ&borrowernumber=16
5) Add an e-mail address to "Primary e-mail"
6) Create a new FreeForm request, visit:
<staff_url>/cgi-bin/koha/ill/ill-requests.pl?method=create&backend=FreeForm
7) Set 'type' enter '42' in cardnumber and pick a library. Click 'Create'.
8) Click "Place request with partners"
9) Pick a partner library (will be the same patron from step 4)
10) Click "Send email". Notice the CSRF error.
11) Apply patch and restart plack
koha-plack --restart kohadev
12) Repeat 8-10. Notice error no longer shows.
13) Notice the request's status is now 'Requested from partners'
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
1) Install FreeForm, enable ILL module, run:
bash <(curl -s https://raw.githubusercontent.com/ammopt/koha-ill-dev/master/start-ill-dev.sh)
2) You'll have to switch the FreeForm branch to the one compatible with this work, i.e.:
cd /kohadevbox/koha/Koha/Illbackends/FreeForm
git checkout b_36243
3) Restart plack:
koha-plack --restart kohadev
4) Create a new FreeForm request, visit:
<staff_url>/cgi-bin/koha/ill/ill-requests.pl?method=create&backend=FreeForm
5) Set 'type' enter '42' in cardnumber and pick a library. Click 'Create'.
6) Edit that request, click "manage request" or if #1 visit:
<staff_url>/cgi-bin/koha/ill/ill-requests.pl?op=illview&illrequest_id=1
7) Click "Edit request". Click "Submit". Notice it errors "No CSRF token passed for POST"
9) Apply patches. Restart plack.
10) Repeat 7)
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
'cud-' needs to be removed here because it's showing the form, not handling its POST submission
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This line is supposed to searhc for plugins with the method 'provides_api' which returns a {type => 'search'} entry among others.
This has nothing to do with search vs cud-search from in forms
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
All ILL backend retrocompatibility code has been moved to Illrequest.pm:get_op_param_deprecation for isolation and clarity
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
We should no longer need to check CSRF token from pl files
TODO - there is a change for some files where we returned 403
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
We do not longer need to generate_csrf from pl files
TODO - members/boraccount.tt and sco/sco-main.tt needs to be adjusted
Bug 34478: [TO SQUASH] Remove generate_csrf from pl
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The 'new' method in Koha::Plugins returns undefined if
plugins are disabled. Therefore, calls to this method
must be guarded by a check that plugins actually are enabled.
Test plan:
* Code inspection of patch, alternatively
* Activate the ill system by installing a backend such as
koha-illbackend-libris:
https://github.com/Libriotech/koha-illbackend-libris
* Make sure plugins are disabled in koha-conf.xml
* In the staff interface, go to ILL requests.
* The page should load without getting an error 500.
PA amended commit message: This is not related to ILL backends being plugins or not
This is about ILL batches, where checking for metadata enrichment plugins was missing 'enable_plugins' guard
Additionally, unrelated to batches, it's also about ILLAvailability, where checking for ILL availabililty plugins was missing enable_plugins guard
Signed-off-by: Pedro Amorim <pedro.amorim@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Hans Pålsson <hans.palsson@hkr.se>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Staging modal area had issues listing availability checks for each request in the batch creation process
To test:
1) Run bash <(curl -s https://raw.githubusercontent.com/ammopt/koha-ill-dev/master/start-ill-dev-plus.sh)
2) Install a metadata enrichment plugin, e.g. https://github.com/PTFS-Europe/koha-plugin-api-pubmed/releases
3) Install and configure an availability plugin, e.g. eds https://github.com/PTFS-Europe/koha-plugin-ill-avail-eds/releases
4) Enable ILLCheckAvailability sys pref
5) Create a new ILL batch and input some pubmedids, i.e. 34898594, 31452466
6) Verify that the availability results show and are working, for each request in the batch
Signed-off-by: Edith Speller <Edith.Speller@ukhsa.gov.uk>
Sponsored-by: UKHSA (UK Health Security Agency)
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
- Add batch column to requests table
- Establish if there are any availability or metadata enrichment plugins and pass that to the template
- Verify if we have any backend that can support batches, if not, don't show the option
- Updates to the ILL toolbar
- New ILL batch modal
- New Koha classes
- API specs
Co-authored-by: Andrew Isherwood <andrew.isherwood@ptfs-europe.com>
Signed-off-by: Edith Speller <Edith.Speller@ukhsa.gov.uk>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Issue that this patch fixes:
1) Enable ILLmodule and install FreeForm, run:
bash <(curl -s https://raw.githubusercontent.com/ammopt/koha-ill-dev/master/start-ill-dev.sh)
2) Copy the example YAML text into the system preference input box
3) Create a new FreeForm request and enter a duff borrowernumber e.g. '11111111111111'
4) Click 'Create'. Submit the type disclaimer stage.
5) Notice there's an error
6) Apply this patch.
7) Repeat steps 3 and 4. Verify that the correct 'The borrower details you entered are invalid' error message is displayed instead of the error in 5).
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test plan:
- Enable ILLCheckAvailability;
- Enable ILLModule and install FreeForm
- Update partner_code in koha-conf.xml to match the patron category being used ('IL' if on k-t-d)
- Install and configure z39.50 availability plugin, link it to the patron ID ('16' if on k-t-d)
- Add a valid e-mail address to the patron of 'IL' category
- Create a new ILL request and go to 'Manage request' screen
- Click 'Place request with partners' notice the label 'Partners available for searching: none'
- Apply patch and refresh, notice a 'Search selected partners' button now shows up after you select the partner from the list
This is a fix for a regression caused by the rest of the code in this bug. I'm submitting this here since this has not yet been pushed and the fix is quite self-explanatory
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Update the way Availability is handled
Add the new type disclaimer workflow operation
after Availability
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
1) Enable ILLmodule and install FreeForm, run:
bash <(curl -s https://raw.githubusercontent.com/ammopt/koha-ill-dev/master/start-ill-dev.sh)
2) Visit a request that doesn't exist (assuming empty illrequests table):
INTRA/cgi-bin/koha/ill/ill-requests.pl?method=illview&illrequest_id=1
3) Verify an error 500 is returned with message "Can't call method
"backend_illview""
4) Apply patch
5) Repeat steps 1-3. Verify that a "ILL request not found." message is
now displayed
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This commit allows illview to use an intranet template supplied by the backend, as
per other stages. The template must be named illview.inc
Test plan:
- Apply the patch
- Install FreeForm backend (https://github.com/PTFS-Europe/koha-ill-freeform)
- Create a request
- On the resulting "Manage ILL request" note the display is normal
- Create a new file in the FreeForm backend directory: /intra-includes/illview.inc
with the following content:
[% BLOCK backend_jsinclude %]
<script>(function() { alert("Working!"); })()</script>
[% END %]
- Restart Plack if enabled
- Reload the page
=> TEST: Observe that the alert specified in the template is displayed
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
and some more...
There are lot of inconsistencies in our ->search calls. We could
simplify some of them, but not in this patch. Here we want to prevent
regressions as much as possible and so don't add unecessary changes.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch changes an active request's backend and initiates the
migration on that request, rather than creating another and migrating
that.
The majority of the work to accomplish this bug is being carried out in
the backends, since Koha delegates migrations to them.
Signed-off-by: Barry Cannon <bc@interleaf.ie>
Signed-off-by: Assumpta Byrne <abyrne@ait.ie>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
On bug 17591 we discovered that there was something weird going on with
the way we export and use subroutines/modules.
This patch tries to standardize our EXPORT to use EXPORT_OK only.
That way we will need to explicitely define the subroutine we want to
use from a module.
This patch is a squashed version of:
Bug 17600: After export.pl
Bug 17600: After perlimport
Bug 17600: Manual changes
Bug 17600: Other manual changes after second perlimports run
Bug 17600: Fix tests
And a lot of other manual changes.
export.pl is a dirty script that can be found on bug 17600.
"perlimport" is:
git clone https://github.com/oalders/App-perlimports.git
cd App-perlimports/
cpanm --installdeps .
export PERL5LIB="$PERL5LIB:/kohadevbox/koha/App-perlimports/lib"
find . \( -name "*.pl" -o -name "*.pm" \) -exec perl App-perlimports/script/perlimports --inplace-edit --no-preserve-unused --filename {} \;
The ideas of this patch are to:
* use EXPORT_OK instead of EXPORT
* perltidy the EXPORT_OK list
* remove '&' before the subroutine names
* remove some uneeded use statements
* explicitely import the subroutines we need within the controllers or
modules
Note that the private subroutines (starting with _) should not be
exported (and not used from outside of the module except from tests).
EXPORT vs EXPORT_OK (from
https://www.thegeekstuff.com/2010/06/perl-exporter-examples/)
"""
Export allows to export the functions and variables of modules to user’s namespace using the standard import method. This way, we don’t need to create the objects for the modules to access it’s members.
@EXPORT and @EXPORT_OK are the two main variables used during export operation.
@EXPORT contains list of symbols (subroutines and variables) of the module to be exported into the caller namespace.
@EXPORT_OK does export of symbols on demand basis.
"""
If this patch caused a conflict with a patch you wrote prior to its
push:
* Make sure you are not reintroducing a "use" statement that has been
removed
* "$subroutine" is not exported by the C4::$MODULE module
means that you need to add the subroutine to the @EXPORT_OK list
* Bareword "$subroutine" not allowed while "strict subs"
means that you didn't imported the subroutine from the module:
- use $MODULE qw( $subroutine list );
You can also use the fully qualified namespace: C4::$MODULE::$subroutine
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds the ability for ILL to send notices, both triggered by
staff and triggered by events.
Staff can trigger notices to patrons from the "Manage ILL request" screen:
- ILL request ready for pickup
- ILL request unavailable
- Place request with partners
The following notices to staff are triggered automatically:
- Request has been modified by patron
- Request has been cancelled by patron
Branches can now specify an "ILL email" address to which notices
intended to inform staff of changes to requests by patrons can be sent.
The sending of notices is controlled by a few new sysprefs:
- "ILLDefaultStaffEmail" - Fallback email address for staff ILL notices
to be sent to in the absence of a branch address
- "ILLSendStaffNotices" - To specify which staff notices should be sent
automatically when requests are manipulated by patrons
Patron notices are also controlled by the patron's messaging
preferences
Sponsored-by: PTFS Europe
Signed-off-by: Niamh Walker-Headon <Niamh.Walker-Headon@it-tallaght.ie>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Lucas Gass
Tomas Cohen Arazi
Pedro Amorim
Lari Taskula
Pedro Amorim
Koha Development Team
Nick Clemens
Jonathan Druart
Andreas Jonsson
Andrew Isherwood