Signed-off-by: Magnus Enger <magnus@libriotech.no>
No more mention of verbose.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 1bd49fcab8)
Signed-off-by: Matt Blenkinsop <matt.blenkinsop@ptfs-europe.com>
(cherry picked from commit 165c945b5e)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
(cherry picked from commit e31c60109e)
Signed-off-by: danyonsewell <danyonsewell@catalyst.net.nz>
(cherry picked from commit e31c60109e)
This patch adds an "exit 0" to the end of koha-foreach, so that it
returns a successful exit code if it reaches the bottom of the script
without errors.
Test plan:
0) `koha-foreach echo`
1) `echo $?`
2) Note that the exit status is 1
3) Apply patch
4) `./debian/scripts/koha-foreach echo`
5) `echo $?`
6) Note that the exit status is 0
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit e8a187eb74)
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
(cherry picked from commit ef3985df06)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
(cherry picked from commit 9f8b34e8d6)
Signed-off-by: danyonsewell <danyonsewell@catalyst.net.nz>
(cherry picked from commit 9f8b34e8d6)
to test...
- build master packages, observe failure :(
debian/build-git-snapshot -d -v 22.12.00-24~git1 -D dev -b base_22.12.00+deb10 --noautoversion
"/usr/bin/perl" build-resources.PL
yarn install v1.22.19
warning You don't appear to have an internet connection. Try the --offline flag to use the cache for registry queries.
- apply patch
- build master packages, observe success :)
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 0a0c6554d7)
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
(cherry picked from commit e65aa28abe)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
(cherry picked from commit b19e2b0569)
Signed-off-by: Arthur Suzuki <arthur.suzuki@biblibre.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
(cherry picked from commit f74a353097)
Signed-off-by: Jacob O'Mara <jacobomara901@gmail.com>
(cherry picked from commit cff59f18d5)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
(cherry picked from commit deb2371d4b)
Signed-off-by: Arthur Suzuki <arthur.suzuki@biblibre.com>
This change prevents debhelper from renaming history.txt to changelog,
since that renaming was breaking the Timeline feature in Koha.
Another option would've been to rename history.txt to something else
but that filename is already embedded in Koha and the Koha release
tools, so this seems the safer option.
Test plan:
0. Apply patch
1. Build Debian package
2. Confirm that /usr/share/doc/koha-common/history.txt is created
and /usr/share/doc/koha-common/changelog.gz is not created
Signed-off-by: Mason James <mtj@kohaaloha.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit b6f9241d66)
Signed-off-by: Matt Blenkinsop <matt.blenkinsop@ptfs-europe.com>
(cherry picked from commit 3b6aac190c)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
(cherry picked from commit 09d1416ad3)
Signed-off-by: Arthur Suzuki <arthur.suzuki@biblibre.com>
See also bug 32612.
The output option includes the stdout.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit d27d39e4b8)
Signed-off-by: Jacob O'Mara <jacob.omara@ptfs-europe.com>
(cherry picked from commit 05d5b029f2)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
(cherry picked from commit 03abd18eb6)
Signed-off-by: Arthur Suzuki <arthur.suzuki@biblibre.com>
As far as I can tell, we are no longer using CGI::Session::Serialize::YAML or YAML::Syck, but they are still marked dependencies for the Debian package.
Signed-off-by: Danyon Sewell <danyonsewell@catalyst.net.nz>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jacob O'Mara <jacob.omara@ptfs-europe.com>
(cherry picked from commit 56ecfc55fc)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
(cherry picked from commit 114fa96a06)
Signed-off-by: Arthur Suzuki <arthur.suzuki@biblibre.com>
When viewing the man page for the `koha-list` command, the output does
not appear correctly: there appears to be a "staircase"-like effect on
the text. The same is true for all other man pages.
The source XML files for our man pages have the following namespace
declaration at the top: xmlns='http://docbook.org/ns/docbook', which
means they are DocBook V5.0 documents and should be processed by
namespace-aware DocBook XSL stylesheets.
This patch fixes that by using the DocBook-to-man-page transformation
stylesheet from the docbook-xsl-ns package (note the "-ns" suffix).
Test plan:
1) Apply the patch
2) Build and install new package
3) Confirm the man pages display correctly
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 43ecb3c86c)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
(cherry picked from commit 708b8d996a)
Signed-off-by: Arthur Suzuki <arthur.suzuki@biblibre.com>
The PLACKOPAC, PLACKAPI and PLACKINTRANET appenders still need %n
(i.e. a newline). Note that this patch does not add %l since it
is a bit confusing because it adds a lot of Plack internal noise like:
[2022/09/29 08:51:34] [WARN] Test mainpage CGI::Compile::ROOT::usr_share_koha_mainpage_2epl::__ANON__ /usr/share/koha/mainpage.pl (49)
The patch is a result of:
git grep -l "log4perl.appender.PLACK" | xargs sed -i -e"/ConversionPattern/ s/%m$/%m%n/"
Test plan:
First run: sed -i -e"/ConversionPattern/ s/%m$/%m%n/" /etc/koha/sites/[YOUR_CLONE]/log4perl.conf
Edit that file, change PLACKOPAC to debug level like:
log4perl.logger.plack-opac = DEBUG, PLACKOPAC
Restart.
Hit an OPAC page twice.
Check plack-opac logfile and verify that it contains a newline between last two messages like:
[2022/09/29 08:04:30] [DEBUG] kohaversion : 22.0600054
[2022/09/29 08:04:42] [DEBUG] kohaversion : 22.0600054
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit ef81785d76)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
(cherry picked from commit 73d3abd65d)
Signed-off-by: Arthur Suzuki <arthur.suzuki@biblibre.com>
As requested by Jonathan, we need more flexibility ;)
Here it comes.
Test plan:
Run t/CookieManager.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit cffd36bcb4)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
(cherry picked from commit d865ce1665)
Signed-off-by: Arthur Suzuki <arthur.suzuki@biblibre.com>
Test plan:
Add this change to your koha-conf.xml.
Flush, restart.
Test if the cookie is kept now in the interface.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit cf8e560e37)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
(cherry picked from commit bf7a65e13e)
Signed-off-by: Arthur Suzuki <arthur.suzuki@biblibre.com>
0. Apply patch
1. cp /usr/sbin/koha-plack /usr/sbin/koha-plack.bak
2. cp debian/scripts/koha-plack /usr/sbin/koha-plack
3. Now at roughly the same time do the following two actions:
3a. Go to http://localhost:8081/cgi-bin/koha/about.pl
3b. koha-plack --stop kohadev
4. Note that the HTTP request completes
5. Click on "Home"
6. Note that the error is "Service Unavailable" rather than "Proxy Error",
which would've occurred with an interrupted HTTP request/response
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 5155e43b04)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
(cherry picked from commit 6150bd7d81)
Signed-off-by: Arthur Suzuki <arthur.suzuki@biblibre.com>
In Koha, any report that uses C4::Reports::Guided will be limited to 999,999 rows. This is causing problems for larger libraries where some reports may have over a million results.
Test Plan:
1) Create a report "SELECT * FROM borrowers" and run it, note the number
of results
2) Apply this patch
3) Add the line `<report_results_limit>3</report_results_limit>`
within the <config> block of your koha-conf.xml
4) Restart all the things!
5) Run the report, download the results as a CSV
6) Note your CSV only has 4 lines, the header and 3 patrons
Signed-off-by: Rachael Laritz <rachael.laritz@inlibro.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 5e29433bdc)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
(cherry picked from commit ae71ac66f8)
Signed-off-by: Arthur Suzuki <arthur.suzuki@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 4a00658e34)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
(cherry picked from commit ecc6a21ad2)
Signed-off-by: Arthur Suzuki <arthur.suzuki@biblibre.com>
If I run a query like "SELECT NOW()" from a koha report, I will get a different answer than if I had run it from koha-mysql.
In Koha, we set the timezone for each database connection.
However, koha-mysql does not do this, so instead we are left using the default timezone of the database.
Test Plan:
1) Set your time zone to something other than the database time zone
2) run "SELECT NOW()" using debian/scripts/koha-mysql
*not* /usr/sbin/koha-mysql
3) Note you get the database timezone's current time
4) Apply this patch
5) Repeat step 2
6) Now you get the correct time!
Signed-off-by: Michal Urban <michalurban177@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit e97b099d58)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
(cherry picked from commit 5e14e2c693)
Signed-off-by: Arthur Suzuki <arthur.suzuki@biblibre.com>
On bug 23250 we decided to generate a password without special chars
then add a '@' at the end to comply with MySQL policy.
That is wrong, we should handle correctly the special chars we don't
want to be part of the password.
Test plan:
1.
mysqlpwd=$(pwgen -s -y -r ":'&\\<>/" 16 1)
echo $mysqlpwd
Confirm that you don't see one of the following chars : ' & \ < > /
2.
Copy from src and edit /usr/sbin/koha-create to add an echo $mysqlpwd
Create several instances, like:
koha-create --create-db x
koha-create --create-db xx
koha-create --create-db xxx
...
When you see a password with a special chars, do:
koha-shell xxx
grep '<pass>' $KOHA_CONF
And make sure the password does not contain "__DB_PASS__"
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit ffd3b4b7e3)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
(cherry picked from commit 026c7588d9)
Signed-off-by: Arthur Suzuki <arthur.suzuki@biblibre.com>
This is just theoretical, but by removing the second true you
could end the script on another error.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
When restoring a Koha instance, and the database user does not exist, an error is shown,
although it is prevented from stopping the script by ` || true`. This patch removes the
` || true` guard, and rather uses `DROP USER IF EXISTS` which does exactly what one
would expect, without confusing error messages, whether the user existed or not.
To test:
1) Assume your Koha instance is called `asdf`.
1) Export the Koha instance using `koha-dump`.
2) Remove the instance completely using `koha-remove`.
3) Import it again using `koha-restore`.
4) No error should be shown, and the import should work. There was NO user to drop, therefore `DROP USER IF EXISTS` did nothing.
5) A database user called `koha_asdf` should exist, and have all privileges on the database of the same name.
6) Remove the instance again using `koha-remove`.
7) Now create a database user in MySQL called `koha_instance` where instance is the name of your dumped koha instance.
8) Import your koha instance again using `koha-restore`.
9) Again, no error should be shown, and the import should work. There WAS a user to drop, therefore `DROP USER IF EXISTS` dropped the user before creating a new one.
10) Again, a database user called `koha_asdf` should exist, and have all privileges on the database of the same name.
Sponsored-by: Reformational Study Centre
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
As requested on comment99. Personally I do not feel that it
should be a requirement for adding a koha-conf entry though.
Note that koha-create does/did not even support adding multiple
line entries to koha-conf like we do here now.
But it might be a start for adding them?
Test plan:
The following tweak might help you to test without running the
complete koha-create, while still convincing you:
[1] cp debian/templates/koha-conf-site.xml.in /etc/koha/test.conf
[2] Add the following line in debian/scripts/koha-create. Append
if after the BCRYPT_SETTINGS= line on L652:
generate_config_file test.conf test.xml; exit
[3] Run debian/scripts/koha-create --keep-cookie A
[4] Check if you see <do_not_remove_cookie>A<..> in test.xml.
[5] Run debian/scripts/koha-create --keep-cookie A --keep-cookie B
[6] Check for two lines in test.xml
[7] Run debian/scripts/koha-create clone_name
[8] Check that the __KEEP_COOKIE__ line is gone in test.xml.
[9] Undo the tweak by removing test.xml and /etc/koha/test.conf,
and removing the added line from koha-create.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Test plan:
Just comments. Nothing to test.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Amended: using new name for deny list.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
1/ apply patch
2/ build and install new koha-common package
=> Package liblocale-codes-perl is not installed, Koha does not need it
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Mason James <mtj@kohaaloha.com>
JD amended patch: fix commit message
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle Hall <kyle@bywatersolutions.com>
to test...
- attempt to install koha-common pkg on deb12
confirm error...
The following packages have unmet dependencies:
koha-common : Depends: libdbd-sqlite2-perl but it is not installable
- apply patch, rebuild new package
- install new koha-common pkg on deb12 successfully
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The line to use the --databases flag with mysqldump by default was accidentally
removed from koha-dump when the --schema-only option was added. This makes all
backups act as if koha-dump is called with the --without-db-name flag, causing
koha-restore to fail to restore the database because it's neither CREATEd or USEd.
This patch restores that line
To test:
1 - sudo debian/scripts/koha-dump kohadev
2 - zcat /var/spool/koha/kohadev/kohadev-2021-07-28.sql.gz | grep DATABASE
3 - Notice no output
4 - Apply patch
5 - sudo debian/scripts/koha-dump kohadev
6 - zcat /var/spool/koha/kohadev/kohadev-2021-07-28.sql.gz | grep DATABASE
7 - You get the line:
CREATE DATABASE /*!32312 IF NOT EXISTS*/ `koha_kohadev` /*!40100 DEFAULT CHARACTER SET latin1 */;
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Bug 15253 originally had the ability to specify the incoming IP address used for
a given log statement via SIP, as well as the SIP2 account that was in use at the time.
This data is very helpful for debugging purposes, and should be brought back.
Test Plan:
1) Apply this patch
2) Update you SIP ConversionPattern to "[%d] [%p] %X{accountid}@%X{peeraddr}: %m %l %n"
3) Restart SIP
4) Use the SIP cli tester to make some SIP requests
5) View the SIP2 log, note the account id and client ip address show in the log!
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Trivial change.
Do sed -i -r -e'/log4perl/ s/\s%n$/%n/' on the log4perl configs.
Test plan:
Update your own config.
Trigger some logging and check that logfile.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
koha-indexer doesn't test INDEXER_PARAMS correctly which causes errors
to display when stopping/starting the daemon.
This patch fixes the test so that the variable is tested as a string,
so that no errors are created and the params are passed correctly.
Test plan:
0. Apply patch
1. vi /etc/default/koha-common
2. Add the following to the bottom of the file:
INDEXER_PARAMS="-daemon -sleep 6"
3. cp debian/scripts/koha-indexer /usr/sbin/koha-indexer
4. koha-indexer --stop kohadev
5. Note no errors
6. koha-indexer --start kohadev
7. Note no errors
8. ps -efww | grep "indexer"
9. Note that rebuild_zebra.pl has the arguments "-daemon -sleep 6"
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Test plan:
% koha-shell kohadev -c 'echo $PERL5LIB'
=> /kohadevbox/koha:/kohadevbox/koha/lib
% koha-shell kohadev
echo $PERL5LIB
=> /kohadevbox/koha:/kohadevbox/koha/lib:/kohadevbox/qa-test-tools
Note that this is not consistent but at least we have lib now in both
situations
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds a "lib" directory to the source tree which gets
mapped to the same directory as "C4" and "Koha" for single and
standard installations.
CGI::Session::Serialize::yamlxs is put into this "lib" directory.
This patch also includes some changes so that dev/git installations
work as well.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch makes koha-create generate the log4perl.conf file for the
instance, belonging to the instance user. This is done in order to have
the z3950 responder work.
My original idea was to make the responder accept a '-g' parameter but
that is not supported by Net::Z3950::Responder. Also, as the library
insists on handling the PID file on its own, it wont' work to handle the
responsability to start-stop-daemon. The only solution I found was
making the fiel be owned by the instance user.
1. Create a Koha instance:
$ koha-create --create-db test
2. Initiate all the things
3. Enable and start the z3950 responder
$ koha-z3950-responder --enable test
$ koha-z3950-responder --start test
4. Try doing some search:
$ yaz-client localhost:2100
=> FAIL: you get:
Connecting...OK.
Sent initrequest.
Target closed connection
Z> quit
See you later, alligator.
=> FAIL: No warning or anything on the logs
5. Stop the daemon
$ koha-z3950-responder --stop test
6. Run it manually:
$ PERL5LIB=/usr/share/koha/lib KOHA_CONF=/etc/koha/sites/test/koha-conf.xml \
/usr/bin/perl /usr/share/koha/bin/z3950_responder.pl \
-c /etc/koha/sites/test/z3950 -u test-koha \
-p /var/run/koha/test/z3950-responder.pid -d test-koha-z3950
7. Repeat the 4, on a separate terminal (no daemon mode this time)
=> FAIL: You get:
Cannot open /etc/koha/sites/test/log4perl.conf (Permission denied) at /usr/share/perl5/Log/Log4perl/Config/BaseConfigurator.pm line 51.
8. Change the file owner:
$ chown test-koha /etc/koha/sites/test/log4perl.conf
9. Repeat 6, and 4
=> SUCCESS: It doesn't break anymore!
10. Apply this patch
11. Create a new instance, with the patched koha-create:
$ debian/scripts/koha-create --create-db test1
12: Check the generated files permissions:
$ ls -l /etc/koha/sites/test2
=> SUCCESS: You get:
-rw-r----- 1 root test2-koha 19720 May 17 13:26 koha-conf.xml
-rw-r----- 1 test2-koha test2-koha 2825 May 17 13:26 log4perl.conf
-rw-r----- 1 root test2-koha 2014 May 17 13:26 zebra-authorities-dom.cfg
-rw-r----- 1 root test2-koha 2279 May 17 13:26 zebra-biblios-dom.cfg
-rw-r----- 1 root test2-koha 26 May 17 13:26 zebra.passwd
13. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Ere Maijala <ere.maijala@helsinki.fi>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
to test...
1/ build package
2/ install package on focal
3/ check that libcgi-compile-perl 0.24 is not installed
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
to test...
1/ build package
2/ install package on focal
3/ check that libcgi-compile-perl 0.24 is not installed
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds the User directive to the koha-worker systemd unit file
Test plan:
0a. DO NOT APPLY PATCH YET
0b. Start a Koha testing environment running systemd
1. koha-worker --stop kohadev
2. cp debian/templates/koha-worker@.service /etc/systemd/system/.
3. systemctl start koha-worker@kohadev.service
4. ps -efww | grep "background_jobs_worker"
5. Note koha-worker is running as root
6. APPLY THE PATCH
7. cp debian/templates/koha-worker@.service /etc/systemd/system/.
8. systemctl daemon-reload
9. systemctl restart koha-worker@kohadev.service
10. ps -efww | grep "background_jobs_worker"
11. Note that koha-worker is now running as kohadev-koha
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds the posibility to set an itemtype with automatic
checkin. It means that when the checkout is due, it will
automatically check in.
To test:
1. apply patches
2. updatedatabase
3. go to koha administration -> item types and edin an item type (from
now on called itemtype1)
CHECK => there is a checkbox almost at the end called automatic checkin
4. check that checkbox and save
5. checkout 2 items from itemtype1 and one item from another itemtype
(from now on called itemtype2)
6. go to mysql database console (koha-mysql) and manually set date_due = current_timestamp
in issues table for the item of itemtype2 and only one of the items of
itemtype1
7. run cronjob at misc/cronjobs/automatic_checkin.pl
8. go to mysql database console again and select * from issues
SUCCESS => All issues are present except for the issue of itemtype1
which had it's date_due set to current_timestamp. That one was
automatically checked in.
9. prove t/db_dependent/Koha/Checkouts.t
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Hasina Akhter <HasinaA@pascolibraries.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds `%P` to the SIP log4perl configuration so that PID is
recorded against log lines.
This allows transactions to be more easily tied together under one
SIPServer, thus making it easier to pick out a whole transaction from
start to finish.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch simply adds tab-completion for this script.
To test:
1. Apply this patch
2. Run:
$ cp debian/koha-common.bash-completion /etc/bash_completion.d/koha-common
3. Open a new bash instance
4. Type 'koha-worker <tab>'
=> SUCCESS: All options are there
5. Play with Koha instances
=> SUCCESS: they show up, once chosen they are not offered anymore
6. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds the following option switches to koha-create:
--mb-host
--mb-port
--mb-user
--mb-pass
--mb-vhost
They are used to override the default values on instance creation.
To test:
1. Play with the several option switches and verify that the resulting
koha-conf.xml contains the expected data.
=> SUCCESS: It works as expected
2. Sign off :-D
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Mason James
Jonathan Druart
David Cook
Marcel de Rooy
Kyle M Hall
Andreas Roussos
Rudolf Byker
Martin Renvoize
Jason Boyer
Tomas Cohen Arazi
Agustin Moyano